nuclear@0: /*
nuclear@0:  * jdmainct.c
nuclear@0:  *
nuclear@0:  * Copyright (C) 1994-1996, Thomas G. Lane.
nuclear@0:  * This file is part of the Independent JPEG Group's software.
nuclear@0:  * For conditions of distribution and use, see the accompanying README file.
nuclear@0:  *
nuclear@0:  * This file contains the main buffer controller for decompression.
nuclear@0:  * The main buffer lies between the JPEG decompressor proper and the
nuclear@0:  * post-processor; it holds downsampled data in the JPEG colorspace.
nuclear@0:  *
nuclear@0:  * Note that this code is bypassed in raw-data mode, since the application
nuclear@0:  * supplies the equivalent of the main buffer in that case.
nuclear@0:  */
nuclear@0: 
nuclear@0: #define JPEG_INTERNALS
nuclear@0: #include "jinclude.h"
nuclear@0: #include "jpeglib.h"
nuclear@0: 
nuclear@0: 
nuclear@0: /*
nuclear@0:  * In the current system design, the main buffer need never be a full-image
nuclear@0:  * buffer; any full-height buffers will be found inside the coefficient or
nuclear@0:  * postprocessing controllers.  Nonetheless, the main controller is not
nuclear@0:  * trivial.  Its responsibility is to provide context rows for upsampling/
nuclear@0:  * rescaling, and doing this in an efficient fashion is a bit tricky.
nuclear@0:  *
nuclear@0:  * Postprocessor input data is counted in "row groups".  A row group
nuclear@0:  * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
nuclear@0:  * sample rows of each component.  (We require DCT_scaled_size values to be
nuclear@0:  * chosen such that these numbers are integers.  In practice DCT_scaled_size
nuclear@0:  * values will likely be powers of two, so we actually have the stronger
nuclear@0:  * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.)
nuclear@0:  * Upsampling will typically produce max_v_samp_factor pixel rows from each
nuclear@0:  * row group (times any additional scale factor that the upsampler is
nuclear@0:  * applying).
nuclear@0:  *
nuclear@0:  * The coefficient controller will deliver data to us one iMCU row at a time;
nuclear@0:  * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
nuclear@0:  * exactly min_DCT_scaled_size row groups.  (This amount of data corresponds
nuclear@0:  * to one row of MCUs when the image is fully interleaved.)  Note that the
nuclear@0:  * number of sample rows varies across components, but the number of row
nuclear@0:  * groups does not.  Some garbage sample rows may be included in the last iMCU
nuclear@0:  * row at the bottom of the image.
nuclear@0:  *
nuclear@0:  * Depending on the vertical scaling algorithm used, the upsampler may need
nuclear@0:  * access to the sample row(s) above and below its current input row group.
nuclear@0:  * The upsampler is required to set need_context_rows TRUE at global selection
nuclear@0:  * time if so.  When need_context_rows is FALSE, this controller can simply
nuclear@0:  * obtain one iMCU row at a time from the coefficient controller and dole it
nuclear@0:  * out as row groups to the postprocessor.
nuclear@0:  *
nuclear@0:  * When need_context_rows is TRUE, this controller guarantees that the buffer
nuclear@0:  * passed to postprocessing contains at least one row group's worth of samples
nuclear@0:  * above and below the row group(s) being processed.  Note that the context
nuclear@0:  * rows "above" the first passed row group appear at negative row offsets in
nuclear@0:  * the passed buffer.  At the top and bottom of the image, the required
nuclear@0:  * context rows are manufactured by duplicating the first or last real sample
nuclear@0:  * row; this avoids having special cases in the upsampling inner loops.
nuclear@0:  *
nuclear@0:  * The amount of context is fixed at one row group just because that's a
nuclear@0:  * convenient number for this controller to work with.  The existing
nuclear@0:  * upsamplers really only need one sample row of context.  An upsampler
nuclear@0:  * supporting arbitrary output rescaling might wish for more than one row
nuclear@0:  * group of context when shrinking the image; tough, we don't handle that.
nuclear@0:  * (This is justified by the assumption that downsizing will be handled mostly
nuclear@0:  * by adjusting the DCT_scaled_size values, so that the actual scale factor at
nuclear@0:  * the upsample step needn't be much less than one.)
nuclear@0:  *
nuclear@0:  * To provide the desired context, we have to retain the last two row groups
nuclear@0:  * of one iMCU row while reading in the next iMCU row.  (The last row group
nuclear@0:  * can't be processed until we have another row group for its below-context,
nuclear@0:  * and so we have to save the next-to-last group too for its above-context.)
nuclear@0:  * We could do this most simply by copying data around in our buffer, but
nuclear@0:  * that'd be very slow.  We can avoid copying any data by creating a rather
nuclear@0:  * strange pointer structure.  Here's how it works.  We allocate a workspace
nuclear@0:  * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
nuclear@0:  * of row groups per iMCU row).  We create two sets of redundant pointers to
nuclear@0:  * the workspace.  Labeling the physical row groups 0 to M+1, the synthesized
nuclear@0:  * pointer lists look like this:
nuclear@0:  *                   M+1                          M-1
nuclear@0:  * master pointer --> 0         master pointer --> 0
nuclear@0:  *                    1                            1
nuclear@0:  *                   ...                          ...
nuclear@0:  *                   M-3                          M-3
nuclear@0:  *                   M-2                           M
nuclear@0:  *                   M-1                          M+1
nuclear@0:  *                    M                           M-2
nuclear@0:  *                   M+1                          M-1
nuclear@0:  *                    0                            0
nuclear@0:  * We read alternate iMCU rows using each master pointer; thus the last two
nuclear@0:  * row groups of the previous iMCU row remain un-overwritten in the workspace.
nuclear@0:  * The pointer lists are set up so that the required context rows appear to
nuclear@0:  * be adjacent to the proper places when we pass the pointer lists to the
nuclear@0:  * upsampler.
nuclear@0:  *
nuclear@0:  * The above pictures describe the normal state of the pointer lists.
nuclear@0:  * At top and bottom of the image, we diddle the pointer lists to duplicate
nuclear@0:  * the first or last sample row as necessary (this is cheaper than copying
nuclear@0:  * sample rows around).
nuclear@0:  *
nuclear@0:  * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that
nuclear@0:  * situation each iMCU row provides only one row group so the buffering logic
nuclear@0:  * must be different (eg, we must read two iMCU rows before we can emit the
nuclear@0:  * first row group).  For now, we simply do not support providing context
nuclear@0:  * rows when min_DCT_scaled_size is 1.  That combination seems unlikely to
nuclear@0:  * be worth providing --- if someone wants a 1/8th-size preview, they probably
nuclear@0:  * want it quick and dirty, so a context-free upsampler is sufficient.
nuclear@0:  */
nuclear@0: 
nuclear@0: 
nuclear@0: /* Private buffer controller object */
nuclear@0: 
nuclear@0: typedef struct {
nuclear@0:   struct jpeg_d_main_controller pub; /* public fields */
nuclear@0: 
nuclear@0:   /* Pointer to allocated workspace (M or M+2 row groups). */
nuclear@0:   JSAMPARRAY buffer[MAX_COMPONENTS];
nuclear@0: 
nuclear@0:   boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
nuclear@0:   JDIMENSION rowgroup_ctr;	/* counts row groups output to postprocessor */
nuclear@0: 
nuclear@0:   /* Remaining fields are only used in the context case. */
nuclear@0: 
nuclear@0:   /* These are the master pointers to the funny-order pointer lists. */
nuclear@0:   JSAMPIMAGE xbuffer[2];	/* pointers to weird pointer lists */
nuclear@0: 
nuclear@0:   int whichptr;			/* indicates which pointer set is now in use */
nuclear@0:   int context_state;		/* process_data state machine status */
nuclear@0:   JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
nuclear@0:   JDIMENSION iMCU_row_ctr;	/* counts iMCU rows to detect image top/bot */
nuclear@0: } my_main_controller;
nuclear@0: 
nuclear@0: typedef my_main_controller * my_main_ptr;
nuclear@0: 
nuclear@0: /* context_state values: */
nuclear@0: #define CTX_PREPARE_FOR_IMCU	0	/* need to prepare for MCU row */
nuclear@0: #define CTX_PROCESS_IMCU	1	/* feeding iMCU to postprocessor */
nuclear@0: #define CTX_POSTPONED_ROW	2	/* feeding postponed row group */
nuclear@0: 
nuclear@0: 
nuclear@0: /* Forward declarations */
nuclear@0: METHODDEF(void) process_data_simple_main
nuclear@0: 	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
nuclear@0: 	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
nuclear@0: METHODDEF(void) process_data_context_main
nuclear@0: 	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
nuclear@0: 	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
nuclear@0: #ifdef QUANT_2PASS_SUPPORTED
nuclear@0: METHODDEF(void) process_data_crank_post
nuclear@0: 	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
nuclear@0: 	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
nuclear@0: #endif
nuclear@0: 
nuclear@0: 
nuclear@0: LOCAL(void)
nuclear@0: alloc_funny_pointers (j_decompress_ptr cinfo)
nuclear@0: /* Allocate space for the funny pointer lists.
nuclear@0:  * This is done only once, not once per pass.
nuclear@0:  */
nuclear@0: {
nuclear@0:   my_main_ptr main = (my_main_ptr) cinfo->main;
nuclear@0:   int ci, rgroup;
nuclear@0:   int M = cinfo->min_DCT_scaled_size;
nuclear@0:   jpeg_component_info *compptr;
nuclear@0:   JSAMPARRAY xbuf;
nuclear@0: 
nuclear@0:   /* Get top-level space for component array pointers.
nuclear@0:    * We alloc both arrays with one call to save a few cycles.
nuclear@0:    */
nuclear@0:   main->xbuffer[0] = (JSAMPIMAGE)
nuclear@0:     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
nuclear@0: 				cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));
nuclear@0:   main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components;
nuclear@0: 
nuclear@0:   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
nuclear@0:        ci++, compptr++) {
nuclear@0:     rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
nuclear@0:       cinfo->min_DCT_scaled_size; /* height of a row group of component */
nuclear@0:     /* Get space for pointer lists --- M+4 row groups in each list.
nuclear@0:      * We alloc both pointer lists with one call to save a few cycles.
nuclear@0:      */
nuclear@0:     xbuf = (JSAMPARRAY)
nuclear@0:       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
nuclear@0: 				  2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));
nuclear@0:     xbuf += rgroup;		/* want one row group at negative offsets */
nuclear@0:     main->xbuffer[0][ci] = xbuf;
nuclear@0:     xbuf += rgroup * (M + 4);
nuclear@0:     main->xbuffer[1][ci] = xbuf;
nuclear@0:   }
nuclear@0: }
nuclear@0: 
nuclear@0: 
nuclear@0: LOCAL(void)
nuclear@0: make_funny_pointers (j_decompress_ptr cinfo)
nuclear@0: /* Create the funny pointer lists discussed in the comments above.
nuclear@0:  * The actual workspace is already allocated (in main->buffer),
nuclear@0:  * and the space for the pointer lists is allocated too.
nuclear@0:  * This routine just fills in the curiously ordered lists.
nuclear@0:  * This will be repeated at the beginning of each pass.
nuclear@0:  */
nuclear@0: {
nuclear@0:   my_main_ptr main = (my_main_ptr) cinfo->main;
nuclear@0:   int ci, i, rgroup;
nuclear@0:   int M = cinfo->min_DCT_scaled_size;
nuclear@0:   jpeg_component_info *compptr;
nuclear@0:   JSAMPARRAY buf, xbuf0, xbuf1;
nuclear@0: 
nuclear@0:   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
nuclear@0:        ci++, compptr++) {
nuclear@0:     rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
nuclear@0:       cinfo->min_DCT_scaled_size; /* height of a row group of component */
nuclear@0:     xbuf0 = main->xbuffer[0][ci];
nuclear@0:     xbuf1 = main->xbuffer[1][ci];
nuclear@0:     /* First copy the workspace pointers as-is */
nuclear@0:     buf = main->buffer[ci];
nuclear@0:     for (i = 0; i < rgroup * (M + 2); i++) {
nuclear@0:       xbuf0[i] = xbuf1[i] = buf[i];
nuclear@0:     }
nuclear@0:     /* In the second list, put the last four row groups in swapped order */
nuclear@0:     for (i = 0; i < rgroup * 2; i++) {
nuclear@0:       xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i];
nuclear@0:       xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i];
nuclear@0:     }
nuclear@0:     /* The wraparound pointers at top and bottom will be filled later
nuclear@0:      * (see set_wraparound_pointers, below).  Initially we want the "above"
nuclear@0:      * pointers to duplicate the first actual data line.  This only needs
nuclear@0:      * to happen in xbuffer[0].
nuclear@0:      */
nuclear@0:     for (i = 0; i < rgroup; i++) {
nuclear@0:       xbuf0[i - rgroup] = xbuf0[0];
nuclear@0:     }
nuclear@0:   }
nuclear@0: }
nuclear@0: 
nuclear@0: 
nuclear@0: LOCAL(void)
nuclear@0: set_wraparound_pointers (j_decompress_ptr cinfo)
nuclear@0: /* Set up the "wraparound" pointers at top and bottom of the pointer lists.
nuclear@0:  * This changes the pointer list state from top-of-image to the normal state.
nuclear@0:  */
nuclear@0: {
nuclear@0:   my_main_ptr main = (my_main_ptr) cinfo->main;
nuclear@0:   int ci, i, rgroup;
nuclear@0:   int M = cinfo->min_DCT_scaled_size;
nuclear@0:   jpeg_component_info *compptr;
nuclear@0:   JSAMPARRAY xbuf0, xbuf1;
nuclear@0: 
nuclear@0:   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
nuclear@0:        ci++, compptr++) {
nuclear@0:     rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
nuclear@0:       cinfo->min_DCT_scaled_size; /* height of a row group of component */
nuclear@0:     xbuf0 = main->xbuffer[0][ci];
nuclear@0:     xbuf1 = main->xbuffer[1][ci];
nuclear@0:     for (i = 0; i < rgroup; i++) {
nuclear@0:       xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];
nuclear@0:       xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];
nuclear@0:       xbuf0[rgroup*(M+2) + i] = xbuf0[i];
nuclear@0:       xbuf1[rgroup*(M+2) + i] = xbuf1[i];
nuclear@0:     }
nuclear@0:   }
nuclear@0: }
nuclear@0: 
nuclear@0: 
nuclear@0: LOCAL(void)
nuclear@0: set_bottom_pointers (j_decompress_ptr cinfo)
nuclear@0: /* Change the pointer lists to duplicate the last sample row at the bottom
nuclear@0:  * of the image.  whichptr indicates which xbuffer holds the final iMCU row.
nuclear@0:  * Also sets rowgroups_avail to indicate number of nondummy row groups in row.
nuclear@0:  */
nuclear@0: {
nuclear@0:   my_main_ptr main = (my_main_ptr) cinfo->main;
nuclear@0:   int ci, i, rgroup, iMCUheight, rows_left;
nuclear@0:   jpeg_component_info *compptr;
nuclear@0:   JSAMPARRAY xbuf;
nuclear@0: 
nuclear@0:   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
nuclear@0:        ci++, compptr++) {
nuclear@0:     /* Count sample rows in one iMCU row and in one row group */
nuclear@0:     iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;
nuclear@0:     rgroup = iMCUheight / cinfo->min_DCT_scaled_size;
nuclear@0:     /* Count nondummy sample rows remaining for this component */
nuclear@0:     rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
nuclear@0:     if (rows_left == 0) rows_left = iMCUheight;
nuclear@0:     /* Count nondummy row groups.  Should get same answer for each component,
nuclear@0:      * so we need only do it once.
nuclear@0:      */
nuclear@0:     if (ci == 0) {
nuclear@0:       main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
nuclear@0:     }
nuclear@0:     /* Duplicate the last real sample row rgroup*2 times; this pads out the
nuclear@0:      * last partial rowgroup and ensures at least one full rowgroup of context.
nuclear@0:      */
nuclear@0:     xbuf = main->xbuffer[main->whichptr][ci];
nuclear@0:     for (i = 0; i < rgroup * 2; i++) {
nuclear@0:       xbuf[rows_left + i] = xbuf[rows_left-1];
nuclear@0:     }
nuclear@0:   }
nuclear@0: }
nuclear@0: 
nuclear@0: 
nuclear@0: /*
nuclear@0:  * Initialize for a processing pass.
nuclear@0:  */
nuclear@0: 
nuclear@0: METHODDEF(void)
nuclear@0: start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
nuclear@0: {
nuclear@0:   my_main_ptr main = (my_main_ptr) cinfo->main;
nuclear@0: 
nuclear@0:   switch (pass_mode) {
nuclear@0:   case JBUF_PASS_THRU:
nuclear@0:     if (cinfo->upsample->need_context_rows) {
nuclear@0:       main->pub.process_data = process_data_context_main;
nuclear@0:       make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
nuclear@0:       main->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
nuclear@0:       main->context_state = CTX_PREPARE_FOR_IMCU;
nuclear@0:       main->iMCU_row_ctr = 0;
nuclear@0:     } else {
nuclear@0:       /* Simple case with no context needed */
nuclear@0:       main->pub.process_data = process_data_simple_main;
nuclear@0:     }
nuclear@0:     main->buffer_full = FALSE;	/* Mark buffer empty */
nuclear@0:     main->rowgroup_ctr = 0;
nuclear@0:     break;
nuclear@0: #ifdef QUANT_2PASS_SUPPORTED
nuclear@0:   case JBUF_CRANK_DEST:
nuclear@0:     /* For last pass of 2-pass quantization, just crank the postprocessor */
nuclear@0:     main->pub.process_data = process_data_crank_post;
nuclear@0:     break;
nuclear@0: #endif
nuclear@0:   default:
nuclear@0:     ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
nuclear@0:     break;
nuclear@0:   }
nuclear@0: }
nuclear@0: 
nuclear@0: 
nuclear@0: /*
nuclear@0:  * Process some data.
nuclear@0:  * This handles the simple case where no context is required.
nuclear@0:  */
nuclear@0: 
nuclear@0: METHODDEF(void)
nuclear@0: process_data_simple_main (j_decompress_ptr cinfo,
nuclear@0: 			  JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
nuclear@0: 			  JDIMENSION out_rows_avail)
nuclear@0: {
nuclear@0:   my_main_ptr main = (my_main_ptr) cinfo->main;
nuclear@0:   JDIMENSION rowgroups_avail;
nuclear@0: 
nuclear@0:   /* Read input data if we haven't filled the main buffer yet */
nuclear@0:   if (! main->buffer_full) {
nuclear@0:     if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer))
nuclear@0:       return;			/* suspension forced, can do nothing more */
nuclear@0:     main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
nuclear@0:   }
nuclear@0: 
nuclear@0:   /* There are always min_DCT_scaled_size row groups in an iMCU row. */
nuclear@0:   rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;
nuclear@0:   /* Note: at the bottom of the image, we may pass extra garbage row groups
nuclear@0:    * to the postprocessor.  The postprocessor has to check for bottom
nuclear@0:    * of image anyway (at row resolution), so no point in us doing it too.
nuclear@0:    */
nuclear@0: 
nuclear@0:   /* Feed the postprocessor */
nuclear@0:   (*cinfo->post->post_process_data) (cinfo, main->buffer,
nuclear@0: 				     &main->rowgroup_ctr, rowgroups_avail,
nuclear@0: 				     output_buf, out_row_ctr, out_rows_avail);
nuclear@0: 
nuclear@0:   /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
nuclear@0:   if (main->rowgroup_ctr >= rowgroups_avail) {
nuclear@0:     main->buffer_full = FALSE;
nuclear@0:     main->rowgroup_ctr = 0;
nuclear@0:   }
nuclear@0: }
nuclear@0: 
nuclear@0: 
nuclear@0: /*
nuclear@0:  * Process some data.
nuclear@0:  * This handles the case where context rows must be provided.
nuclear@0:  */
nuclear@0: 
nuclear@0: METHODDEF(void)
nuclear@0: process_data_context_main (j_decompress_ptr cinfo,
nuclear@0: 			   JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
nuclear@0: 			   JDIMENSION out_rows_avail)
nuclear@0: {
nuclear@0:   my_main_ptr main = (my_main_ptr) cinfo->main;
nuclear@0: 
nuclear@0:   /* Read input data if we haven't filled the main buffer yet */
nuclear@0:   if (! main->buffer_full) {
nuclear@0:     if (! (*cinfo->coef->decompress_data) (cinfo,
nuclear@0: 					   main->xbuffer[main->whichptr]))
nuclear@0:       return;			/* suspension forced, can do nothing more */
nuclear@0:     main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
nuclear@0:     main->iMCU_row_ctr++;	/* count rows received */
nuclear@0:   }
nuclear@0: 
nuclear@0:   /* Postprocessor typically will not swallow all the input data it is handed
nuclear@0:    * in one call (due to filling the output buffer first).  Must be prepared
nuclear@0:    * to exit and restart.  This switch lets us keep track of how far we got.
nuclear@0:    * Note that each case falls through to the next on successful completion.
nuclear@0:    */
nuclear@0:   switch (main->context_state) {
nuclear@0:   case CTX_POSTPONED_ROW:
nuclear@0:     /* Call postprocessor using previously set pointers for postponed row */
nuclear@0:     (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
nuclear@0: 			&main->rowgroup_ctr, main->rowgroups_avail,
nuclear@0: 			output_buf, out_row_ctr, out_rows_avail);
nuclear@0:     if (main->rowgroup_ctr < main->rowgroups_avail)
nuclear@0:       return;			/* Need to suspend */
nuclear@0:     main->context_state = CTX_PREPARE_FOR_IMCU;
nuclear@0:     if (*out_row_ctr >= out_rows_avail)
nuclear@0:       return;			/* Postprocessor exactly filled output buf */
nuclear@0:     /*FALLTHROUGH*/
nuclear@0:   case CTX_PREPARE_FOR_IMCU:
nuclear@0:     /* Prepare to process first M-1 row groups of this iMCU row */
nuclear@0:     main->rowgroup_ctr = 0;
nuclear@0:     main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);
nuclear@0:     /* Check for bottom of image: if so, tweak pointers to "duplicate"
nuclear@0:      * the last sample row, and adjust rowgroups_avail to ignore padding rows.
nuclear@0:      */
nuclear@0:     if (main->iMCU_row_ctr == cinfo->total_iMCU_rows)
nuclear@0:       set_bottom_pointers(cinfo);
nuclear@0:     main->context_state = CTX_PROCESS_IMCU;
nuclear@0:     /*FALLTHROUGH*/
nuclear@0:   case CTX_PROCESS_IMCU:
nuclear@0:     /* Call postprocessor using previously set pointers */
nuclear@0:     (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
nuclear@0: 			&main->rowgroup_ctr, main->rowgroups_avail,
nuclear@0: 			output_buf, out_row_ctr, out_rows_avail);
nuclear@0:     if (main->rowgroup_ctr < main->rowgroups_avail)
nuclear@0:       return;			/* Need to suspend */
nuclear@0:     /* After the first iMCU, change wraparound pointers to normal state */
nuclear@0:     if (main->iMCU_row_ctr == 1)
nuclear@0:       set_wraparound_pointers(cinfo);
nuclear@0:     /* Prepare to load new iMCU row using other xbuffer list */
nuclear@0:     main->whichptr ^= 1;	/* 0=>1 or 1=>0 */
nuclear@0:     main->buffer_full = FALSE;
nuclear@0:     /* Still need to process last row group of this iMCU row, */
nuclear@0:     /* which is saved at index M+1 of the other xbuffer */
nuclear@0:     main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);
nuclear@0:     main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);
nuclear@0:     main->context_state = CTX_POSTPONED_ROW;
nuclear@0:   }
nuclear@0: }
nuclear@0: 
nuclear@0: 
nuclear@0: /*
nuclear@0:  * Process some data.
nuclear@0:  * Final pass of two-pass quantization: just call the postprocessor.
nuclear@0:  * Source data will be the postprocessor controller's internal buffer.
nuclear@0:  */
nuclear@0: 
nuclear@0: #ifdef QUANT_2PASS_SUPPORTED
nuclear@0: 
nuclear@0: METHODDEF(void)
nuclear@0: process_data_crank_post (j_decompress_ptr cinfo,
nuclear@0: 			 JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
nuclear@0: 			 JDIMENSION out_rows_avail)
nuclear@0: {
nuclear@0:   (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL,
nuclear@0: 				     (JDIMENSION *) NULL, (JDIMENSION) 0,
nuclear@0: 				     output_buf, out_row_ctr, out_rows_avail);
nuclear@0: }
nuclear@0: 
nuclear@0: #endif /* QUANT_2PASS_SUPPORTED */
nuclear@0: 
nuclear@0: 
nuclear@0: /*
nuclear@0:  * Initialize main buffer controller.
nuclear@0:  */
nuclear@0: 
nuclear@0: GLOBAL(void)
nuclear@0: jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
nuclear@0: {
nuclear@0:   my_main_ptr main;
nuclear@0:   int ci, rgroup, ngroups;
nuclear@0:   jpeg_component_info *compptr;
nuclear@0: 
nuclear@0:   main = (my_main_ptr)
nuclear@0:     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
nuclear@0: 				SIZEOF(my_main_controller));
nuclear@0:   cinfo->main = (struct jpeg_d_main_controller *) main;
nuclear@0:   main->pub.start_pass = start_pass_main;
nuclear@0: 
nuclear@0:   if (need_full_buffer)		/* shouldn't happen */
nuclear@0:     ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
nuclear@0: 
nuclear@0:   /* Allocate the workspace.
nuclear@0:    * ngroups is the number of row groups we need.
nuclear@0:    */
nuclear@0:   if (cinfo->upsample->need_context_rows) {
nuclear@0:     if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */
nuclear@0:       ERREXIT(cinfo, JERR_NOTIMPL);
nuclear@0:     alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
nuclear@0:     ngroups = cinfo->min_DCT_scaled_size + 2;
nuclear@0:   } else {
nuclear@0:     ngroups = cinfo->min_DCT_scaled_size;
nuclear@0:   }
nuclear@0: 
nuclear@0:   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
nuclear@0:        ci++, compptr++) {
nuclear@0:     rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
nuclear@0:       cinfo->min_DCT_scaled_size; /* height of a row group of component */
nuclear@0:     main->buffer[ci] = (*cinfo->mem->alloc_sarray)
nuclear@0: 			((j_common_ptr) cinfo, JPOOL_IMAGE,
nuclear@0: 			 compptr->width_in_blocks * compptr->DCT_scaled_size,
nuclear@0: 			 (JDIMENSION) (rgroup * ngroups));
nuclear@0:   }
nuclear@0: }