kern

annotate src/intr.c @ 35:06172322fb76

- made interrupt number - irq mapping macros public in intr.h - disabled the interrupts in various vga driver functions
author John Tsiombikas <nuclear@member.fsf.org>
date Thu, 09 Jun 2011 05:09:49 +0300
parents 7795225808b3
children 928b0ebfff4d
rev   line source
nuclear@11 1 #include <stdio.h>
nuclear@11 2 #include "intr.h"
nuclear@11 3 #include "desc.h"
nuclear@11 4 #include "segm.h"
nuclear@11 5 #include "asmops.h"
nuclear@11 6 #include "panic.h"
nuclear@11 7
nuclear@11 8 /* IDT gate descriptor bits */
nuclear@11 9 #define GATE_TASK (5 << 8)
nuclear@11 10 #define GATE_INTR (6 << 8)
nuclear@11 11 #define GATE_TRAP (7 << 8)
nuclear@11 12 #define GATE_DEFAULT (1 << 11)
nuclear@11 13 #define GATE_PRESENT (1 << 15)
nuclear@11 14
nuclear@11 15 /* PIC command and data ports */
nuclear@11 16 #define PIC1_CMD 0x20
nuclear@11 17 #define PIC1_DATA 0x21
nuclear@11 18 #define PIC2_CMD 0xa0
nuclear@11 19 #define PIC2_DATA 0xa1
nuclear@11 20
nuclear@11 21 /* PIC initialization command word 1 bits */
nuclear@11 22 #define ICW1_ICW4_NEEDED (1 << 0)
nuclear@11 23 #define ICW1_SINGLE (1 << 1)
nuclear@11 24 #define ICW1_INTERVAL4 (1 << 2)
nuclear@11 25 #define ICW1_LEVEL (1 << 3)
nuclear@11 26 #define ICW1_INIT (1 << 4)
nuclear@11 27 /* PIC initialization command word 4 bits */
nuclear@11 28 #define ICW4_8086 (1 << 0)
nuclear@11 29 #define ICW4_AUTO_EOI (1 << 1)
nuclear@11 30 #define ICW4_BUF_SLAVE (1 << 3) /* 1000 */
nuclear@11 31 #define ICW4_BUF_MASTER (3 << 2) /* 1100 */
nuclear@11 32 #define ICW4_SPECIAL (1 << 4)
nuclear@11 33
nuclear@11 34 /* PIC operation command word 2 bits */
nuclear@11 35 #define OCW2_EOI (1 << 5)
nuclear@11 36
nuclear@11 37
nuclear@11 38 /* structure used to pass the interrupt stack frame from the
nuclear@11 39 * entry points to the C dispatch function.
nuclear@11 40 */
nuclear@11 41 struct intr_frame {
nuclear@11 42 /* registers pushed by pusha in intr_entry_* */
nuclear@11 43 uint32_t edi, esi, ebp, esp;
nuclear@11 44 uint32_t ebx, edx, ecx, eax;
nuclear@11 45 /* interrupt number and error code pushed in intr_entry_* */
nuclear@11 46 uint32_t inum, err;
nuclear@11 47 /* pushed by CPU during interrupt entry */
nuclear@11 48 uint32_t eip, cs, eflags;
nuclear@11 49 };
nuclear@11 50
nuclear@11 51
nuclear@11 52 static void init_pic(int offset);
nuclear@11 53 static void gate_desc(desc_t *desc, uint16_t sel, uint32_t addr, int dpl, int type);
nuclear@11 54 static void set_intr_entry(int num, void (*handler)(void));
nuclear@11 55 static void end_of_irq(int irq);
nuclear@11 56
nuclear@11 57 /* defined in intr-asm.S */
nuclear@11 58 void set_idt(uint32_t addr, uint16_t limit);
nuclear@11 59 void intr_entry_default(void);
nuclear@11 60
nuclear@11 61 /* the IDT (interrupt descriptor table) */
nuclear@11 62 static desc_t idt[256];
nuclear@11 63 /* table of handler functions for all interrupts */
nuclear@11 64 static intr_func_t intr_func[256];
nuclear@11 65
nuclear@11 66
nuclear@11 67 void init_intr(void)
nuclear@11 68 {
nuclear@11 69 int i;
nuclear@11 70
nuclear@11 71 set_idt((uint32_t)idt, sizeof idt - 1);
nuclear@11 72
nuclear@11 73 /* initialize all entry points and interrupt handlers */
nuclear@11 74 for(i=0; i<256; i++) {
nuclear@11 75 set_intr_entry(i, intr_entry_default);
nuclear@11 76 interrupt(i, 0);
nuclear@11 77 }
nuclear@11 78
nuclear@11 79 /* by including interrupts.h here (without ASM being defined)
nuclear@11 80 * the series of INTR_ENTRY_* macros will be expanded to a series
nuclear@11 81 * of function prototypes for all interrupt entry points and the
nuclear@11 82 * corresponding calls to set_intr_entry to set up the IDT slots
nuclear@11 83 */
nuclear@11 84 #include "interrupts.h"
nuclear@11 85
nuclear@11 86 /* initialize the programmable interrupt controller
nuclear@11 87 * setting up the maping of IRQs [0, 15] to interrupts [32, 47]
nuclear@11 88 */
nuclear@11 89 init_pic(IRQ_OFFSET);
nuclear@11 90 }
nuclear@11 91
nuclear@11 92 /* set an interrupt handler function for a particular interrupt */
nuclear@11 93 void interrupt(int intr_num, intr_func_t func)
nuclear@11 94 {
nuclear@11 95 intr_func[intr_num] = func;
nuclear@11 96 }
nuclear@11 97
nuclear@11 98 /* this function is called from all interrupt entry points
nuclear@11 99 * it calls the appropriate interrupt handlers if available and handles
nuclear@11 100 * sending an end-of-interrupt command to the PICs when finished.
nuclear@11 101 */
nuclear@11 102 void dispatch_intr(struct intr_frame frm)
nuclear@11 103 {
nuclear@11 104 if(intr_func[frm.inum]) {
nuclear@11 105 intr_func[frm.inum](frm.inum, frm.err);
nuclear@11 106 } else {
nuclear@11 107 if(frm.inum < 32) {
nuclear@11 108 panic("unhandled exception %d, error code: %d\n", frm.inum, frm.err);
nuclear@11 109 }
nuclear@11 110 printf("unhandled interrupt %d\n", frm.inum);
nuclear@11 111 }
nuclear@11 112
nuclear@11 113 if(IS_IRQ(frm.inum)) {
nuclear@11 114 end_of_irq(INTR_TO_IRQ(frm.inum));
nuclear@11 115 }
nuclear@11 116 }
nuclear@11 117
nuclear@11 118 static void init_pic(int offset)
nuclear@11 119 {
nuclear@11 120 /* send ICW1 saying we'll follow with ICW4 later on */
nuclear@11 121 outb(ICW1_INIT | ICW1_ICW4_NEEDED, PIC1_CMD);
nuclear@11 122 outb(ICW1_INIT | ICW1_ICW4_NEEDED, PIC2_CMD);
nuclear@11 123 /* send ICW2 with IRQ remapping */
nuclear@11 124 outb(offset, PIC1_DATA);
nuclear@11 125 outb(offset + 8, PIC2_DATA);
nuclear@11 126 /* send ICW3 to setup the master/slave relationship */
nuclear@11 127 /* ... set bit3 = 3rd interrupt input has a slave */
nuclear@11 128 outb(4, PIC1_DATA);
nuclear@11 129 /* ... set slave ID to 2 */
nuclear@11 130 outb(2, PIC2_DATA);
nuclear@11 131 /* send ICW4 to set 8086 mode (no calls generated) */
nuclear@11 132 outb(ICW4_8086, PIC1_DATA);
nuclear@11 133 outb(ICW4_8086, PIC2_DATA);
nuclear@11 134 /* done, just reset the data port to 0 */
nuclear@11 135 outb(0, PIC1_DATA);
nuclear@11 136 outb(0, PIC2_DATA);
nuclear@11 137 }
nuclear@11 138
nuclear@11 139 static void gate_desc(desc_t *desc, uint16_t sel, uint32_t addr, int dpl, int type)
nuclear@11 140 {
nuclear@11 141 /* first 16bit part is the low 16bits of the entry address */
nuclear@11 142 desc->d[0] = addr & 0xffff;
nuclear@11 143 /* second 16bit part is the segment selector for the entry code */
nuclear@11 144 desc->d[1] = sel;
nuclear@11 145 /* third 16bit part has the privilege level, type, and present bit */
nuclear@11 146 desc->d[2] = ((dpl & 3) << 13) | type | GATE_DEFAULT | GATE_PRESENT;
nuclear@11 147 /* last 16bit part is the high 16bits of the entry address */
nuclear@11 148 desc->d[3] = (addr & 0xffff0000) >> 16;
nuclear@11 149 }
nuclear@11 150
nuclear@12 151 #define IS_TRAP(n) ((n) < 32)
nuclear@11 152 static void set_intr_entry(int num, void (*handler)(void))
nuclear@11 153 {
nuclear@11 154 int type = IS_TRAP(num) ? GATE_TRAP : GATE_INTR;
nuclear@11 155 gate_desc(idt + num, selector(SEGM_KCODE, 0), (uint32_t)handler, 0, type);
nuclear@11 156 }
nuclear@11 157
nuclear@11 158 static void end_of_irq(int irq)
nuclear@11 159 {
nuclear@11 160 if(irq > 7) {
nuclear@11 161 outb(OCW2_EOI, PIC2_CMD);
nuclear@11 162 }
nuclear@11 163 outb(OCW2_EOI, PIC1_CMD);
nuclear@11 164 }