nuclear@26: /* deflate.c -- compress data using the deflation algorithm nuclear@26: * Copyright (C) 1995-2005 Jean-loup Gailly. nuclear@26: * For conditions of distribution and use, see copyright notice in zlib.h nuclear@26: */ nuclear@26: nuclear@26: /* nuclear@26: * ALGORITHM nuclear@26: * nuclear@26: * The "deflation" process depends on being able to identify portions nuclear@26: * of the input text which are identical to earlier input (within a nuclear@26: * sliding window trailing behind the input currently being processed). nuclear@26: * nuclear@26: * The most straightforward technique turns out to be the fastest for nuclear@26: * most input files: try all possible matches and select the longest. nuclear@26: * The key feature of this algorithm is that insertions into the string nuclear@26: * dictionary are very simple and thus fast, and deletions are avoided nuclear@26: * completely. Insertions are performed at each input character, whereas nuclear@26: * string matches are performed only when the previous match ends. So it nuclear@26: * is preferable to spend more time in matches to allow very fast string nuclear@26: * insertions and avoid deletions. The matching algorithm for small nuclear@26: * strings is inspired from that of Rabin & Karp. A brute force approach nuclear@26: * is used to find longer strings when a small match has been found. nuclear@26: * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze nuclear@26: * (by Leonid Broukhis). nuclear@26: * A previous version of this file used a more sophisticated algorithm nuclear@26: * (by Fiala and Greene) which is guaranteed to run in linear amortized nuclear@26: * time, but has a larger average cost, uses more memory and is patented. nuclear@26: * However the F&G algorithm may be faster for some highly redundant nuclear@26: * files if the parameter max_chain_length (described below) is too large. nuclear@26: * nuclear@26: * ACKNOWLEDGEMENTS nuclear@26: * nuclear@26: * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and nuclear@26: * I found it in 'freeze' written by Leonid Broukhis. nuclear@26: * Thanks to many people for bug reports and testing. nuclear@26: * nuclear@26: * REFERENCES nuclear@26: * nuclear@26: * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". nuclear@26: * Available in http://www.ietf.org/rfc/rfc1951.txt nuclear@26: * nuclear@26: * A description of the Rabin and Karp algorithm is given in the book nuclear@26: * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. nuclear@26: * nuclear@26: * Fiala,E.R., and Greene,D.H. nuclear@26: * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 nuclear@26: * nuclear@26: */ nuclear@26: nuclear@26: /* @(#) $Id$ */ nuclear@26: nuclear@26: #include "deflate.h" nuclear@26: nuclear@26: const char deflate_copyright[] = nuclear@26: " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly "; nuclear@26: /* nuclear@26: If you use the zlib library in a product, an acknowledgment is welcome nuclear@26: in the documentation of your product. If for some reason you cannot nuclear@26: include such an acknowledgment, I would appreciate that you keep this nuclear@26: copyright string in the executable of your product. nuclear@26: */ nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Function prototypes. nuclear@26: */ nuclear@26: typedef enum { nuclear@26: need_more, /* block not completed, need more input or more output */ nuclear@26: block_done, /* block flush performed */ nuclear@26: finish_started, /* finish started, need only more output at next deflate */ nuclear@26: finish_done /* finish done, accept no more input or output */ nuclear@26: } block_state; nuclear@26: nuclear@26: typedef block_state (*compress_func) OF((deflate_state *s, int flush)); nuclear@26: /* Compression function. Returns the block state after the call. */ nuclear@26: nuclear@26: local void fill_window OF((deflate_state *s)); nuclear@26: local block_state deflate_stored OF((deflate_state *s, int flush)); nuclear@26: local block_state deflate_fast OF((deflate_state *s, int flush)); nuclear@26: #ifndef FASTEST nuclear@26: local block_state deflate_slow OF((deflate_state *s, int flush)); nuclear@26: #endif nuclear@26: local void lm_init OF((deflate_state *s)); nuclear@26: local void putShortMSB OF((deflate_state *s, uInt b)); nuclear@26: local void flush_pending OF((z_streamp strm)); nuclear@26: local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); nuclear@26: #ifndef FASTEST nuclear@26: #ifdef ASMV nuclear@26: void match_init OF((void)); /* asm code initialization */ nuclear@26: uInt longest_match OF((deflate_state *s, IPos cur_match)); nuclear@26: #else nuclear@26: local uInt longest_match OF((deflate_state *s, IPos cur_match)); nuclear@26: #endif nuclear@26: #endif nuclear@26: local uInt longest_match_fast OF((deflate_state *s, IPos cur_match)); nuclear@26: nuclear@26: #ifdef DEBUG nuclear@26: local void check_match OF((deflate_state *s, IPos start, IPos match, nuclear@26: int length)); nuclear@26: #endif nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Local data nuclear@26: */ nuclear@26: nuclear@26: #define NIL 0 nuclear@26: /* Tail of hash chains */ nuclear@26: nuclear@26: #ifndef TOO_FAR nuclear@26: # define TOO_FAR 4096 nuclear@26: #endif nuclear@26: /* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ nuclear@26: nuclear@26: #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) nuclear@26: /* Minimum amount of lookahead, except at the end of the input file. nuclear@26: * See deflate.c for comments about the MIN_MATCH+1. nuclear@26: */ nuclear@26: nuclear@26: /* Values for max_lazy_match, good_match and max_chain_length, depending on nuclear@26: * the desired pack level (0..9). The values given below have been tuned to nuclear@26: * exclude worst case performance for pathological files. Better values may be nuclear@26: * found for specific files. nuclear@26: */ nuclear@26: typedef struct config_s { nuclear@26: ush good_length; /* reduce lazy search above this match length */ nuclear@26: ush max_lazy; /* do not perform lazy search above this match length */ nuclear@26: ush nice_length; /* quit search above this match length */ nuclear@26: ush max_chain; nuclear@26: compress_func func; nuclear@26: } config; nuclear@26: nuclear@26: #ifdef FASTEST nuclear@26: local const config configuration_table[2] = { nuclear@26: /* good lazy nice chain */ nuclear@26: /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ nuclear@26: /* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ nuclear@26: #else nuclear@26: local const config configuration_table[10] = { nuclear@26: /* good lazy nice chain */ nuclear@26: /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ nuclear@26: /* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ nuclear@26: /* 2 */ {4, 5, 16, 8, deflate_fast}, nuclear@26: /* 3 */ {4, 6, 32, 32, deflate_fast}, nuclear@26: nuclear@26: /* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ nuclear@26: /* 5 */ {8, 16, 32, 32, deflate_slow}, nuclear@26: /* 6 */ {8, 16, 128, 128, deflate_slow}, nuclear@26: /* 7 */ {8, 32, 128, 256, deflate_slow}, nuclear@26: /* 8 */ {32, 128, 258, 1024, deflate_slow}, nuclear@26: /* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ nuclear@26: #endif nuclear@26: nuclear@26: /* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 nuclear@26: * For deflate_fast() (levels <= 3) good is ignored and lazy has a different nuclear@26: * meaning. nuclear@26: */ nuclear@26: nuclear@26: #define EQUAL 0 nuclear@26: /* result of memcmp for equal strings */ nuclear@26: nuclear@26: #ifndef NO_DUMMY_DECL nuclear@26: struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ nuclear@26: #endif nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Update a hash value with the given input byte nuclear@26: * IN assertion: all calls to to UPDATE_HASH are made with consecutive nuclear@26: * input characters, so that a running hash key can be computed from the nuclear@26: * previous key instead of complete recalculation each time. nuclear@26: */ nuclear@26: #define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) nuclear@26: nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Insert string str in the dictionary and set match_head to the previous head nuclear@26: * of the hash chain (the most recent string with same hash key). Return nuclear@26: * the previous length of the hash chain. nuclear@26: * If this file is compiled with -DFASTEST, the compression level is forced nuclear@26: * to 1, and no hash chains are maintained. nuclear@26: * IN assertion: all calls to to INSERT_STRING are made with consecutive nuclear@26: * input characters and the first MIN_MATCH bytes of str are valid nuclear@26: * (except for the last MIN_MATCH-1 bytes of the input file). nuclear@26: */ nuclear@26: #ifdef FASTEST nuclear@26: #define INSERT_STRING(s, str, match_head) \ nuclear@26: (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ nuclear@26: match_head = s->head[s->ins_h], \ nuclear@26: s->head[s->ins_h] = (Pos)(str)) nuclear@26: #else nuclear@26: #define INSERT_STRING(s, str, match_head) \ nuclear@26: (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ nuclear@26: match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ nuclear@26: s->head[s->ins_h] = (Pos)(str)) nuclear@26: #endif nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Initialize the hash table (avoiding 64K overflow for 16 bit systems). nuclear@26: * prev[] will be initialized on the fly. nuclear@26: */ nuclear@26: #define CLEAR_HASH(s) \ nuclear@26: s->head[s->hash_size-1] = NIL; \ nuclear@26: zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateInit_(strm, level, version, stream_size) nuclear@26: z_streamp strm; nuclear@26: int level; nuclear@26: const char *version; nuclear@26: int stream_size; nuclear@26: { nuclear@26: return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, nuclear@26: Z_DEFAULT_STRATEGY, version, stream_size); nuclear@26: /* To do: ignore strm->next_in if we use it as window */ nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, nuclear@26: version, stream_size) nuclear@26: z_streamp strm; nuclear@26: int level; nuclear@26: int method; nuclear@26: int windowBits; nuclear@26: int memLevel; nuclear@26: int strategy; nuclear@26: const char *version; nuclear@26: int stream_size; nuclear@26: { nuclear@26: deflate_state *s; nuclear@26: int wrap = 1; nuclear@26: static const char my_version[] = ZLIB_VERSION; nuclear@26: nuclear@26: ushf *overlay; nuclear@26: /* We overlay pending_buf and d_buf+l_buf. This works since the average nuclear@26: * output size for (length,distance) codes is <= 24 bits. nuclear@26: */ nuclear@26: nuclear@26: if (version == Z_NULL || version[0] != my_version[0] || nuclear@26: stream_size != sizeof(z_stream)) { nuclear@26: return Z_VERSION_ERROR; nuclear@26: } nuclear@26: if (strm == Z_NULL) return Z_STREAM_ERROR; nuclear@26: nuclear@26: strm->msg = Z_NULL; nuclear@26: if (strm->zalloc == (alloc_func)0) { nuclear@26: strm->zalloc = zcalloc; nuclear@26: strm->opaque = (voidpf)0; nuclear@26: } nuclear@26: if (strm->zfree == (free_func)0) strm->zfree = zcfree; nuclear@26: nuclear@26: #ifdef FASTEST nuclear@26: if (level != 0) level = 1; nuclear@26: #else nuclear@26: if (level == Z_DEFAULT_COMPRESSION) level = 6; nuclear@26: #endif nuclear@26: nuclear@26: if (windowBits < 0) { /* suppress zlib wrapper */ nuclear@26: wrap = 0; nuclear@26: windowBits = -windowBits; nuclear@26: } nuclear@26: #ifdef GZIP nuclear@26: else if (windowBits > 15) { nuclear@26: wrap = 2; /* write gzip wrapper instead */ nuclear@26: windowBits -= 16; nuclear@26: } nuclear@26: #endif nuclear@26: if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || nuclear@26: windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || nuclear@26: strategy < 0 || strategy > Z_FIXED) { nuclear@26: return Z_STREAM_ERROR; nuclear@26: } nuclear@26: if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ nuclear@26: s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); nuclear@26: if (s == Z_NULL) return Z_MEM_ERROR; nuclear@26: strm->state = (struct internal_state FAR *)s; nuclear@26: s->strm = strm; nuclear@26: nuclear@26: s->wrap = wrap; nuclear@26: s->gzhead = Z_NULL; nuclear@26: s->w_bits = windowBits; nuclear@26: s->w_size = 1 << s->w_bits; nuclear@26: s->w_mask = s->w_size - 1; nuclear@26: nuclear@26: s->hash_bits = memLevel + 7; nuclear@26: s->hash_size = 1 << s->hash_bits; nuclear@26: s->hash_mask = s->hash_size - 1; nuclear@26: s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); nuclear@26: nuclear@26: s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); nuclear@26: s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); nuclear@26: s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); nuclear@26: nuclear@26: s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ nuclear@26: nuclear@26: overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); nuclear@26: s->pending_buf = (uchf *) overlay; nuclear@26: s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); nuclear@26: nuclear@26: if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || nuclear@26: s->pending_buf == Z_NULL) { nuclear@26: s->status = FINISH_STATE; nuclear@26: strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); nuclear@26: deflateEnd (strm); nuclear@26: return Z_MEM_ERROR; nuclear@26: } nuclear@26: s->d_buf = overlay + s->lit_bufsize/sizeof(ush); nuclear@26: s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; nuclear@26: nuclear@26: s->level = level; nuclear@26: s->strategy = strategy; nuclear@26: s->method = (Byte)method; nuclear@26: nuclear@26: return deflateReset(strm); nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) nuclear@26: z_streamp strm; nuclear@26: const Bytef *dictionary; nuclear@26: uInt dictLength; nuclear@26: { nuclear@26: deflate_state *s; nuclear@26: uInt length = dictLength; nuclear@26: uInt n; nuclear@26: IPos hash_head = 0; nuclear@26: nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || nuclear@26: strm->state->wrap == 2 || nuclear@26: (strm->state->wrap == 1 && strm->state->status != INIT_STATE)) nuclear@26: return Z_STREAM_ERROR; nuclear@26: nuclear@26: s = strm->state; nuclear@26: if (s->wrap) nuclear@26: strm->adler = adler32(strm->adler, dictionary, dictLength); nuclear@26: nuclear@26: if (length < MIN_MATCH) return Z_OK; nuclear@26: if (length > MAX_DIST(s)) { nuclear@26: length = MAX_DIST(s); nuclear@26: dictionary += dictLength - length; /* use the tail of the dictionary */ nuclear@26: } nuclear@26: zmemcpy(s->window, dictionary, length); nuclear@26: s->strstart = length; nuclear@26: s->block_start = (long)length; nuclear@26: nuclear@26: /* Insert all strings in the hash table (except for the last two bytes). nuclear@26: * s->lookahead stays null, so s->ins_h will be recomputed at the next nuclear@26: * call of fill_window. nuclear@26: */ nuclear@26: s->ins_h = s->window[0]; nuclear@26: UPDATE_HASH(s, s->ins_h, s->window[1]); nuclear@26: for (n = 0; n <= length - MIN_MATCH; n++) { nuclear@26: INSERT_STRING(s, n, hash_head); nuclear@26: } nuclear@26: if (hash_head) hash_head = 0; /* to make compiler happy */ nuclear@26: return Z_OK; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateReset (strm) nuclear@26: z_streamp strm; nuclear@26: { nuclear@26: deflate_state *s; nuclear@26: nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL || nuclear@26: strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { nuclear@26: return Z_STREAM_ERROR; nuclear@26: } nuclear@26: nuclear@26: strm->total_in = strm->total_out = 0; nuclear@26: strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ nuclear@26: strm->data_type = Z_UNKNOWN; nuclear@26: nuclear@26: s = (deflate_state *)strm->state; nuclear@26: s->pending = 0; nuclear@26: s->pending_out = s->pending_buf; nuclear@26: nuclear@26: if (s->wrap < 0) { nuclear@26: s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ nuclear@26: } nuclear@26: s->status = s->wrap ? INIT_STATE : BUSY_STATE; nuclear@26: strm->adler = nuclear@26: #ifdef GZIP nuclear@26: s->wrap == 2 ? crc32(0L, Z_NULL, 0) : nuclear@26: #endif nuclear@26: adler32(0L, Z_NULL, 0); nuclear@26: s->last_flush = Z_NO_FLUSH; nuclear@26: nuclear@26: _tr_init(s); nuclear@26: lm_init(s); nuclear@26: nuclear@26: return Z_OK; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateSetHeader (strm, head) nuclear@26: z_streamp strm; nuclear@26: gz_headerp head; nuclear@26: { nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; nuclear@26: if (strm->state->wrap != 2) return Z_STREAM_ERROR; nuclear@26: strm->state->gzhead = head; nuclear@26: return Z_OK; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflatePrime (strm, bits, value) nuclear@26: z_streamp strm; nuclear@26: int bits; nuclear@26: int value; nuclear@26: { nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; nuclear@26: strm->state->bi_valid = bits; nuclear@26: strm->state->bi_buf = (ush)(value & ((1 << bits) - 1)); nuclear@26: return Z_OK; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateParams(strm, level, strategy) nuclear@26: z_streamp strm; nuclear@26: int level; nuclear@26: int strategy; nuclear@26: { nuclear@26: deflate_state *s; nuclear@26: compress_func func; nuclear@26: int err = Z_OK; nuclear@26: nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; nuclear@26: s = strm->state; nuclear@26: nuclear@26: #ifdef FASTEST nuclear@26: if (level != 0) level = 1; nuclear@26: #else nuclear@26: if (level == Z_DEFAULT_COMPRESSION) level = 6; nuclear@26: #endif nuclear@26: if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { nuclear@26: return Z_STREAM_ERROR; nuclear@26: } nuclear@26: func = configuration_table[s->level].func; nuclear@26: nuclear@26: if (func != configuration_table[level].func && strm->total_in != 0) { nuclear@26: /* Flush the last buffer: */ nuclear@26: err = deflate(strm, Z_PARTIAL_FLUSH); nuclear@26: } nuclear@26: if (s->level != level) { nuclear@26: s->level = level; nuclear@26: s->max_lazy_match = configuration_table[level].max_lazy; nuclear@26: s->good_match = configuration_table[level].good_length; nuclear@26: s->nice_match = configuration_table[level].nice_length; nuclear@26: s->max_chain_length = configuration_table[level].max_chain; nuclear@26: } nuclear@26: s->strategy = strategy; nuclear@26: return err; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) nuclear@26: z_streamp strm; nuclear@26: int good_length; nuclear@26: int max_lazy; nuclear@26: int nice_length; nuclear@26: int max_chain; nuclear@26: { nuclear@26: deflate_state *s; nuclear@26: nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; nuclear@26: s = strm->state; nuclear@26: s->good_match = good_length; nuclear@26: s->max_lazy_match = max_lazy; nuclear@26: s->nice_match = nice_length; nuclear@26: s->max_chain_length = max_chain; nuclear@26: return Z_OK; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= nuclear@26: * For the default windowBits of 15 and memLevel of 8, this function returns nuclear@26: * a close to exact, as well as small, upper bound on the compressed size. nuclear@26: * They are coded as constants here for a reason--if the #define's are nuclear@26: * changed, then this function needs to be changed as well. The return nuclear@26: * value for 15 and 8 only works for those exact settings. nuclear@26: * nuclear@26: * For any setting other than those defaults for windowBits and memLevel, nuclear@26: * the value returned is a conservative worst case for the maximum expansion nuclear@26: * resulting from using fixed blocks instead of stored blocks, which deflate nuclear@26: * can emit on compressed data for some combinations of the parameters. nuclear@26: * nuclear@26: * This function could be more sophisticated to provide closer upper bounds nuclear@26: * for every combination of windowBits and memLevel, as well as wrap. nuclear@26: * But even the conservative upper bound of about 14% expansion does not nuclear@26: * seem onerous for output buffer allocation. nuclear@26: */ nuclear@26: uLong ZEXPORT deflateBound(strm, sourceLen) nuclear@26: z_streamp strm; nuclear@26: uLong sourceLen; nuclear@26: { nuclear@26: deflate_state *s; nuclear@26: uLong destLen; nuclear@26: nuclear@26: /* conservative upper bound */ nuclear@26: destLen = sourceLen + nuclear@26: ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11; nuclear@26: nuclear@26: /* if can't get parameters, return conservative bound */ nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL) nuclear@26: return destLen; nuclear@26: nuclear@26: /* if not default parameters, return conservative bound */ nuclear@26: s = strm->state; nuclear@26: if (s->w_bits != 15 || s->hash_bits != 8 + 7) nuclear@26: return destLen; nuclear@26: nuclear@26: /* default settings: return tight bound for that case */ nuclear@26: return compressBound(sourceLen); nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= nuclear@26: * Put a short in the pending buffer. The 16-bit value is put in MSB order. nuclear@26: * IN assertion: the stream state is correct and there is enough room in nuclear@26: * pending_buf. nuclear@26: */ nuclear@26: local void putShortMSB (s, b) nuclear@26: deflate_state *s; nuclear@26: uInt b; nuclear@26: { nuclear@26: put_byte(s, (Byte)(b >> 8)); nuclear@26: put_byte(s, (Byte)(b & 0xff)); nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= nuclear@26: * Flush as much pending output as possible. All deflate() output goes nuclear@26: * through this function so some applications may wish to modify it nuclear@26: * to avoid allocating a large strm->next_out buffer and copying into it. nuclear@26: * (See also read_buf()). nuclear@26: */ nuclear@26: local void flush_pending(strm) nuclear@26: z_streamp strm; nuclear@26: { nuclear@26: unsigned len = strm->state->pending; nuclear@26: nuclear@26: if (len > strm->avail_out) len = strm->avail_out; nuclear@26: if (len == 0) return; nuclear@26: nuclear@26: zmemcpy(strm->next_out, strm->state->pending_out, len); nuclear@26: strm->next_out += len; nuclear@26: strm->state->pending_out += len; nuclear@26: strm->total_out += len; nuclear@26: strm->avail_out -= len; nuclear@26: strm->state->pending -= len; nuclear@26: if (strm->state->pending == 0) { nuclear@26: strm->state->pending_out = strm->state->pending_buf; nuclear@26: } nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflate (strm, flush) nuclear@26: z_streamp strm; nuclear@26: int flush; nuclear@26: { nuclear@26: int old_flush; /* value of flush param for previous deflate call */ nuclear@26: deflate_state *s; nuclear@26: nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL || nuclear@26: flush > Z_FINISH || flush < 0) { nuclear@26: return Z_STREAM_ERROR; nuclear@26: } nuclear@26: s = strm->state; nuclear@26: nuclear@26: if (strm->next_out == Z_NULL || nuclear@26: (strm->next_in == Z_NULL && strm->avail_in != 0) || nuclear@26: (s->status == FINISH_STATE && flush != Z_FINISH)) { nuclear@26: ERR_RETURN(strm, Z_STREAM_ERROR); nuclear@26: } nuclear@26: if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); nuclear@26: nuclear@26: s->strm = strm; /* just in case */ nuclear@26: old_flush = s->last_flush; nuclear@26: s->last_flush = flush; nuclear@26: nuclear@26: /* Write the header */ nuclear@26: if (s->status == INIT_STATE) { nuclear@26: #ifdef GZIP nuclear@26: if (s->wrap == 2) { nuclear@26: strm->adler = crc32(0L, Z_NULL, 0); nuclear@26: put_byte(s, 31); nuclear@26: put_byte(s, 139); nuclear@26: put_byte(s, 8); nuclear@26: if (s->gzhead == NULL) { nuclear@26: put_byte(s, 0); nuclear@26: put_byte(s, 0); nuclear@26: put_byte(s, 0); nuclear@26: put_byte(s, 0); nuclear@26: put_byte(s, 0); nuclear@26: put_byte(s, s->level == 9 ? 2 : nuclear@26: (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? nuclear@26: 4 : 0)); nuclear@26: put_byte(s, OS_CODE); nuclear@26: s->status = BUSY_STATE; nuclear@26: } nuclear@26: else { nuclear@26: put_byte(s, (s->gzhead->text ? 1 : 0) + nuclear@26: (s->gzhead->hcrc ? 2 : 0) + nuclear@26: (s->gzhead->extra == Z_NULL ? 0 : 4) + nuclear@26: (s->gzhead->name == Z_NULL ? 0 : 8) + nuclear@26: (s->gzhead->comment == Z_NULL ? 0 : 16) nuclear@26: ); nuclear@26: put_byte(s, (Byte)(s->gzhead->time & 0xff)); nuclear@26: put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); nuclear@26: put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); nuclear@26: put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); nuclear@26: put_byte(s, s->level == 9 ? 2 : nuclear@26: (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? nuclear@26: 4 : 0)); nuclear@26: put_byte(s, s->gzhead->os & 0xff); nuclear@26: if (s->gzhead->extra != NULL) { nuclear@26: put_byte(s, s->gzhead->extra_len & 0xff); nuclear@26: put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); nuclear@26: } nuclear@26: if (s->gzhead->hcrc) nuclear@26: strm->adler = crc32(strm->adler, s->pending_buf, nuclear@26: s->pending); nuclear@26: s->gzindex = 0; nuclear@26: s->status = EXTRA_STATE; nuclear@26: } nuclear@26: } nuclear@26: else nuclear@26: #endif nuclear@26: { nuclear@26: uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; nuclear@26: uInt level_flags; nuclear@26: nuclear@26: if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) nuclear@26: level_flags = 0; nuclear@26: else if (s->level < 6) nuclear@26: level_flags = 1; nuclear@26: else if (s->level == 6) nuclear@26: level_flags = 2; nuclear@26: else nuclear@26: level_flags = 3; nuclear@26: header |= (level_flags << 6); nuclear@26: if (s->strstart != 0) header |= PRESET_DICT; nuclear@26: header += 31 - (header % 31); nuclear@26: nuclear@26: s->status = BUSY_STATE; nuclear@26: putShortMSB(s, header); nuclear@26: nuclear@26: /* Save the adler32 of the preset dictionary: */ nuclear@26: if (s->strstart != 0) { nuclear@26: putShortMSB(s, (uInt)(strm->adler >> 16)); nuclear@26: putShortMSB(s, (uInt)(strm->adler & 0xffff)); nuclear@26: } nuclear@26: strm->adler = adler32(0L, Z_NULL, 0); nuclear@26: } nuclear@26: } nuclear@26: #ifdef GZIP nuclear@26: if (s->status == EXTRA_STATE) { nuclear@26: if (s->gzhead->extra != NULL) { nuclear@26: uInt beg = s->pending; /* start of bytes to update crc */ nuclear@26: nuclear@26: while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { nuclear@26: if (s->pending == s->pending_buf_size) { nuclear@26: if (s->gzhead->hcrc && s->pending > beg) nuclear@26: strm->adler = crc32(strm->adler, s->pending_buf + beg, nuclear@26: s->pending - beg); nuclear@26: flush_pending(strm); nuclear@26: beg = s->pending; nuclear@26: if (s->pending == s->pending_buf_size) nuclear@26: break; nuclear@26: } nuclear@26: put_byte(s, s->gzhead->extra[s->gzindex]); nuclear@26: s->gzindex++; nuclear@26: } nuclear@26: if (s->gzhead->hcrc && s->pending > beg) nuclear@26: strm->adler = crc32(strm->adler, s->pending_buf + beg, nuclear@26: s->pending - beg); nuclear@26: if (s->gzindex == s->gzhead->extra_len) { nuclear@26: s->gzindex = 0; nuclear@26: s->status = NAME_STATE; nuclear@26: } nuclear@26: } nuclear@26: else nuclear@26: s->status = NAME_STATE; nuclear@26: } nuclear@26: if (s->status == NAME_STATE) { nuclear@26: if (s->gzhead->name != NULL) { nuclear@26: uInt beg = s->pending; /* start of bytes to update crc */ nuclear@26: int val; nuclear@26: nuclear@26: do { nuclear@26: if (s->pending == s->pending_buf_size) { nuclear@26: if (s->gzhead->hcrc && s->pending > beg) nuclear@26: strm->adler = crc32(strm->adler, s->pending_buf + beg, nuclear@26: s->pending - beg); nuclear@26: flush_pending(strm); nuclear@26: beg = s->pending; nuclear@26: if (s->pending == s->pending_buf_size) { nuclear@26: val = 1; nuclear@26: break; nuclear@26: } nuclear@26: } nuclear@26: val = s->gzhead->name[s->gzindex++]; nuclear@26: put_byte(s, val); nuclear@26: } while (val != 0); nuclear@26: if (s->gzhead->hcrc && s->pending > beg) nuclear@26: strm->adler = crc32(strm->adler, s->pending_buf + beg, nuclear@26: s->pending - beg); nuclear@26: if (val == 0) { nuclear@26: s->gzindex = 0; nuclear@26: s->status = COMMENT_STATE; nuclear@26: } nuclear@26: } nuclear@26: else nuclear@26: s->status = COMMENT_STATE; nuclear@26: } nuclear@26: if (s->status == COMMENT_STATE) { nuclear@26: if (s->gzhead->comment != NULL) { nuclear@26: uInt beg = s->pending; /* start of bytes to update crc */ nuclear@26: int val; nuclear@26: nuclear@26: do { nuclear@26: if (s->pending == s->pending_buf_size) { nuclear@26: if (s->gzhead->hcrc && s->pending > beg) nuclear@26: strm->adler = crc32(strm->adler, s->pending_buf + beg, nuclear@26: s->pending - beg); nuclear@26: flush_pending(strm); nuclear@26: beg = s->pending; nuclear@26: if (s->pending == s->pending_buf_size) { nuclear@26: val = 1; nuclear@26: break; nuclear@26: } nuclear@26: } nuclear@26: val = s->gzhead->comment[s->gzindex++]; nuclear@26: put_byte(s, val); nuclear@26: } while (val != 0); nuclear@26: if (s->gzhead->hcrc && s->pending > beg) nuclear@26: strm->adler = crc32(strm->adler, s->pending_buf + beg, nuclear@26: s->pending - beg); nuclear@26: if (val == 0) nuclear@26: s->status = HCRC_STATE; nuclear@26: } nuclear@26: else nuclear@26: s->status = HCRC_STATE; nuclear@26: } nuclear@26: if (s->status == HCRC_STATE) { nuclear@26: if (s->gzhead->hcrc) { nuclear@26: if (s->pending + 2 > s->pending_buf_size) nuclear@26: flush_pending(strm); nuclear@26: if (s->pending + 2 <= s->pending_buf_size) { nuclear@26: put_byte(s, (Byte)(strm->adler & 0xff)); nuclear@26: put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); nuclear@26: strm->adler = crc32(0L, Z_NULL, 0); nuclear@26: s->status = BUSY_STATE; nuclear@26: } nuclear@26: } nuclear@26: else nuclear@26: s->status = BUSY_STATE; nuclear@26: } nuclear@26: #endif nuclear@26: nuclear@26: /* Flush as much pending output as possible */ nuclear@26: if (s->pending != 0) { nuclear@26: flush_pending(strm); nuclear@26: if (strm->avail_out == 0) { nuclear@26: /* Since avail_out is 0, deflate will be called again with nuclear@26: * more output space, but possibly with both pending and nuclear@26: * avail_in equal to zero. There won't be anything to do, nuclear@26: * but this is not an error situation so make sure we nuclear@26: * return OK instead of BUF_ERROR at next call of deflate: nuclear@26: */ nuclear@26: s->last_flush = -1; nuclear@26: return Z_OK; nuclear@26: } nuclear@26: nuclear@26: /* Make sure there is something to do and avoid duplicate consecutive nuclear@26: * flushes. For repeated and useless calls with Z_FINISH, we keep nuclear@26: * returning Z_STREAM_END instead of Z_BUF_ERROR. nuclear@26: */ nuclear@26: } else if (strm->avail_in == 0 && flush <= old_flush && nuclear@26: flush != Z_FINISH) { nuclear@26: ERR_RETURN(strm, Z_BUF_ERROR); nuclear@26: } nuclear@26: nuclear@26: /* User must not provide more input after the first FINISH: */ nuclear@26: if (s->status == FINISH_STATE && strm->avail_in != 0) { nuclear@26: ERR_RETURN(strm, Z_BUF_ERROR); nuclear@26: } nuclear@26: nuclear@26: /* Start a new block or continue the current one. nuclear@26: */ nuclear@26: if (strm->avail_in != 0 || s->lookahead != 0 || nuclear@26: (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { nuclear@26: block_state bstate; nuclear@26: nuclear@26: bstate = (*(configuration_table[s->level].func))(s, flush); nuclear@26: nuclear@26: if (bstate == finish_started || bstate == finish_done) { nuclear@26: s->status = FINISH_STATE; nuclear@26: } nuclear@26: if (bstate == need_more || bstate == finish_started) { nuclear@26: if (strm->avail_out == 0) { nuclear@26: s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ nuclear@26: } nuclear@26: return Z_OK; nuclear@26: /* If flush != Z_NO_FLUSH && avail_out == 0, the next call nuclear@26: * of deflate should use the same flush parameter to make sure nuclear@26: * that the flush is complete. So we don't have to output an nuclear@26: * empty block here, this will be done at next call. This also nuclear@26: * ensures that for a very small output buffer, we emit at most nuclear@26: * one empty block. nuclear@26: */ nuclear@26: } nuclear@26: if (bstate == block_done) { nuclear@26: if (flush == Z_PARTIAL_FLUSH) { nuclear@26: _tr_align(s); nuclear@26: } else { /* FULL_FLUSH or SYNC_FLUSH */ nuclear@26: _tr_stored_block(s, (char*)0, 0L, 0); nuclear@26: /* For a full flush, this empty block will be recognized nuclear@26: * as a special marker by inflate_sync(). nuclear@26: */ nuclear@26: if (flush == Z_FULL_FLUSH) { nuclear@26: CLEAR_HASH(s); /* forget history */ nuclear@26: } nuclear@26: } nuclear@26: flush_pending(strm); nuclear@26: if (strm->avail_out == 0) { nuclear@26: s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ nuclear@26: return Z_OK; nuclear@26: } nuclear@26: } nuclear@26: } nuclear@26: Assert(strm->avail_out > 0, "bug2"); nuclear@26: nuclear@26: if (flush != Z_FINISH) return Z_OK; nuclear@26: if (s->wrap <= 0) return Z_STREAM_END; nuclear@26: nuclear@26: /* Write the trailer */ nuclear@26: #ifdef GZIP nuclear@26: if (s->wrap == 2) { nuclear@26: put_byte(s, (Byte)(strm->adler & 0xff)); nuclear@26: put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); nuclear@26: put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); nuclear@26: put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); nuclear@26: put_byte(s, (Byte)(strm->total_in & 0xff)); nuclear@26: put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); nuclear@26: put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); nuclear@26: put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); nuclear@26: } nuclear@26: else nuclear@26: #endif nuclear@26: { nuclear@26: putShortMSB(s, (uInt)(strm->adler >> 16)); nuclear@26: putShortMSB(s, (uInt)(strm->adler & 0xffff)); nuclear@26: } nuclear@26: flush_pending(strm); nuclear@26: /* If avail_out is zero, the application will call deflate again nuclear@26: * to flush the rest. nuclear@26: */ nuclear@26: if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ nuclear@26: return s->pending != 0 ? Z_OK : Z_STREAM_END; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= */ nuclear@26: int ZEXPORT deflateEnd (strm) nuclear@26: z_streamp strm; nuclear@26: { nuclear@26: int status; nuclear@26: nuclear@26: if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; nuclear@26: nuclear@26: status = strm->state->status; nuclear@26: if (status != INIT_STATE && nuclear@26: status != EXTRA_STATE && nuclear@26: status != NAME_STATE && nuclear@26: status != COMMENT_STATE && nuclear@26: status != HCRC_STATE && nuclear@26: status != BUSY_STATE && nuclear@26: status != FINISH_STATE) { nuclear@26: return Z_STREAM_ERROR; nuclear@26: } nuclear@26: nuclear@26: /* Deallocate in reverse order of allocations: */ nuclear@26: TRY_FREE(strm, strm->state->pending_buf); nuclear@26: TRY_FREE(strm, strm->state->head); nuclear@26: TRY_FREE(strm, strm->state->prev); nuclear@26: TRY_FREE(strm, strm->state->window); nuclear@26: nuclear@26: ZFREE(strm, strm->state); nuclear@26: strm->state = Z_NULL; nuclear@26: nuclear@26: return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; nuclear@26: } nuclear@26: nuclear@26: /* ========================================================================= nuclear@26: * Copy the source state to the destination state. nuclear@26: * To simplify the source, this is not supported for 16-bit MSDOS (which nuclear@26: * doesn't have enough memory anyway to duplicate compression states). nuclear@26: */ nuclear@26: int ZEXPORT deflateCopy (dest, source) nuclear@26: z_streamp dest; nuclear@26: z_streamp source; nuclear@26: { nuclear@26: #ifdef MAXSEG_64K nuclear@26: return Z_STREAM_ERROR; nuclear@26: #else nuclear@26: deflate_state *ds; nuclear@26: deflate_state *ss; nuclear@26: ushf *overlay; nuclear@26: nuclear@26: nuclear@26: if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { nuclear@26: return Z_STREAM_ERROR; nuclear@26: } nuclear@26: nuclear@26: ss = source->state; nuclear@26: nuclear@26: zmemcpy(dest, source, sizeof(z_stream)); nuclear@26: nuclear@26: ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); nuclear@26: if (ds == Z_NULL) return Z_MEM_ERROR; nuclear@26: dest->state = (struct internal_state FAR *) ds; nuclear@26: zmemcpy(ds, ss, sizeof(deflate_state)); nuclear@26: ds->strm = dest; nuclear@26: nuclear@26: ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); nuclear@26: ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); nuclear@26: ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); nuclear@26: overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); nuclear@26: ds->pending_buf = (uchf *) overlay; nuclear@26: nuclear@26: if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || nuclear@26: ds->pending_buf == Z_NULL) { nuclear@26: deflateEnd (dest); nuclear@26: return Z_MEM_ERROR; nuclear@26: } nuclear@26: /* following zmemcpy do not work for 16-bit MSDOS */ nuclear@26: zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); nuclear@26: zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); nuclear@26: zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); nuclear@26: zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); nuclear@26: nuclear@26: ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); nuclear@26: ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); nuclear@26: ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; nuclear@26: nuclear@26: ds->l_desc.dyn_tree = ds->dyn_ltree; nuclear@26: ds->d_desc.dyn_tree = ds->dyn_dtree; nuclear@26: ds->bl_desc.dyn_tree = ds->bl_tree; nuclear@26: nuclear@26: return Z_OK; nuclear@26: #endif /* MAXSEG_64K */ nuclear@26: } nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Read a new buffer from the current input stream, update the adler32 nuclear@26: * and total number of bytes read. All deflate() input goes through nuclear@26: * this function so some applications may wish to modify it to avoid nuclear@26: * allocating a large strm->next_in buffer and copying from it. nuclear@26: * (See also flush_pending()). nuclear@26: */ nuclear@26: local int read_buf(strm, buf, size) nuclear@26: z_streamp strm; nuclear@26: Bytef *buf; nuclear@26: unsigned size; nuclear@26: { nuclear@26: unsigned len = strm->avail_in; nuclear@26: nuclear@26: if (len > size) len = size; nuclear@26: if (len == 0) return 0; nuclear@26: nuclear@26: strm->avail_in -= len; nuclear@26: nuclear@26: if (strm->state->wrap == 1) { nuclear@26: strm->adler = adler32(strm->adler, strm->next_in, len); nuclear@26: } nuclear@26: #ifdef GZIP nuclear@26: else if (strm->state->wrap == 2) { nuclear@26: strm->adler = crc32(strm->adler, strm->next_in, len); nuclear@26: } nuclear@26: #endif nuclear@26: zmemcpy(buf, strm->next_in, len); nuclear@26: strm->next_in += len; nuclear@26: strm->total_in += len; nuclear@26: nuclear@26: return (int)len; nuclear@26: } nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Initialize the "longest match" routines for a new zlib stream nuclear@26: */ nuclear@26: local void lm_init (s) nuclear@26: deflate_state *s; nuclear@26: { nuclear@26: s->window_size = (ulg)2L*s->w_size; nuclear@26: nuclear@26: CLEAR_HASH(s); nuclear@26: nuclear@26: /* Set the default configuration parameters: nuclear@26: */ nuclear@26: s->max_lazy_match = configuration_table[s->level].max_lazy; nuclear@26: s->good_match = configuration_table[s->level].good_length; nuclear@26: s->nice_match = configuration_table[s->level].nice_length; nuclear@26: s->max_chain_length = configuration_table[s->level].max_chain; nuclear@26: nuclear@26: s->strstart = 0; nuclear@26: s->block_start = 0L; nuclear@26: s->lookahead = 0; nuclear@26: s->match_length = s->prev_length = MIN_MATCH-1; nuclear@26: s->match_available = 0; nuclear@26: s->ins_h = 0; nuclear@26: #ifndef FASTEST nuclear@26: #ifdef ASMV nuclear@26: match_init(); /* initialize the asm code */ nuclear@26: #endif nuclear@26: #endif nuclear@26: } nuclear@26: nuclear@26: #ifndef FASTEST nuclear@26: /* =========================================================================== nuclear@26: * Set match_start to the longest match starting at the given string and nuclear@26: * return its length. Matches shorter or equal to prev_length are discarded, nuclear@26: * in which case the result is equal to prev_length and match_start is nuclear@26: * garbage. nuclear@26: * IN assertions: cur_match is the head of the hash chain for the current nuclear@26: * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 nuclear@26: * OUT assertion: the match length is not greater than s->lookahead. nuclear@26: */ nuclear@26: #ifndef ASMV nuclear@26: /* For 80x86 and 680x0, an optimized version will be provided in match.asm or nuclear@26: * match.S. The code will be functionally equivalent. nuclear@26: */ nuclear@26: local uInt longest_match(s, cur_match) nuclear@26: deflate_state *s; nuclear@26: IPos cur_match; /* current match */ nuclear@26: { nuclear@26: unsigned chain_length = s->max_chain_length;/* max hash chain length */ nuclear@26: register Bytef *scan = s->window + s->strstart; /* current string */ nuclear@26: register Bytef *match; /* matched string */ nuclear@26: register int len; /* length of current match */ nuclear@26: int best_len = s->prev_length; /* best match length so far */ nuclear@26: int nice_match = s->nice_match; /* stop if match long enough */ nuclear@26: IPos limit = s->strstart > (IPos)MAX_DIST(s) ? nuclear@26: s->strstart - (IPos)MAX_DIST(s) : NIL; nuclear@26: /* Stop when cur_match becomes <= limit. To simplify the code, nuclear@26: * we prevent matches with the string of window index 0. nuclear@26: */ nuclear@26: Posf *prev = s->prev; nuclear@26: uInt wmask = s->w_mask; nuclear@26: nuclear@26: #ifdef UNALIGNED_OK nuclear@26: /* Compare two bytes at a time. Note: this is not always beneficial. nuclear@26: * Try with and without -DUNALIGNED_OK to check. nuclear@26: */ nuclear@26: register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; nuclear@26: register ush scan_start = *(ushf*)scan; nuclear@26: register ush scan_end = *(ushf*)(scan+best_len-1); nuclear@26: #else nuclear@26: register Bytef *strend = s->window + s->strstart + MAX_MATCH; nuclear@26: register Byte scan_end1 = scan[best_len-1]; nuclear@26: register Byte scan_end = scan[best_len]; nuclear@26: #endif nuclear@26: nuclear@26: /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. nuclear@26: * It is easy to get rid of this optimization if necessary. nuclear@26: */ nuclear@26: Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); nuclear@26: nuclear@26: /* Do not waste too much time if we already have a good match: */ nuclear@26: if (s->prev_length >= s->good_match) { nuclear@26: chain_length >>= 2; nuclear@26: } nuclear@26: /* Do not look for matches beyond the end of the input. This is necessary nuclear@26: * to make deflate deterministic. nuclear@26: */ nuclear@26: if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; nuclear@26: nuclear@26: Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); nuclear@26: nuclear@26: do { nuclear@26: Assert(cur_match < s->strstart, "no future"); nuclear@26: match = s->window + cur_match; nuclear@26: nuclear@26: /* Skip to next match if the match length cannot increase nuclear@26: * or if the match length is less than 2. Note that the checks below nuclear@26: * for insufficient lookahead only occur occasionally for performance nuclear@26: * reasons. Therefore uninitialized memory will be accessed, and nuclear@26: * conditional jumps will be made that depend on those values. nuclear@26: * However the length of the match is limited to the lookahead, so nuclear@26: * the output of deflate is not affected by the uninitialized values. nuclear@26: */ nuclear@26: #if (defined(UNALIGNED_OK) && MAX_MATCH == 258) nuclear@26: /* This code assumes sizeof(unsigned short) == 2. Do not use nuclear@26: * UNALIGNED_OK if your compiler uses a different size. nuclear@26: */ nuclear@26: if (*(ushf*)(match+best_len-1) != scan_end || nuclear@26: *(ushf*)match != scan_start) continue; nuclear@26: nuclear@26: /* It is not necessary to compare scan[2] and match[2] since they are nuclear@26: * always equal when the other bytes match, given that the hash keys nuclear@26: * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at nuclear@26: * strstart+3, +5, ... up to strstart+257. We check for insufficient nuclear@26: * lookahead only every 4th comparison; the 128th check will be made nuclear@26: * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is nuclear@26: * necessary to put more guard bytes at the end of the window, or nuclear@26: * to check more often for insufficient lookahead. nuclear@26: */ nuclear@26: Assert(scan[2] == match[2], "scan[2]?"); nuclear@26: scan++, match++; nuclear@26: do { nuclear@26: } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && nuclear@26: *(ushf*)(scan+=2) == *(ushf*)(match+=2) && nuclear@26: *(ushf*)(scan+=2) == *(ushf*)(match+=2) && nuclear@26: *(ushf*)(scan+=2) == *(ushf*)(match+=2) && nuclear@26: scan < strend); nuclear@26: /* The funny "do {}" generates better code on most compilers */ nuclear@26: nuclear@26: /* Here, scan <= window+strstart+257 */ nuclear@26: Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); nuclear@26: if (*scan == *match) scan++; nuclear@26: nuclear@26: len = (MAX_MATCH - 1) - (int)(strend-scan); nuclear@26: scan = strend - (MAX_MATCH-1); nuclear@26: nuclear@26: #else /* UNALIGNED_OK */ nuclear@26: nuclear@26: if (match[best_len] != scan_end || nuclear@26: match[best_len-1] != scan_end1 || nuclear@26: *match != *scan || nuclear@26: *++match != scan[1]) continue; nuclear@26: nuclear@26: /* The check at best_len-1 can be removed because it will be made nuclear@26: * again later. (This heuristic is not always a win.) nuclear@26: * It is not necessary to compare scan[2] and match[2] since they nuclear@26: * are always equal when the other bytes match, given that nuclear@26: * the hash keys are equal and that HASH_BITS >= 8. nuclear@26: */ nuclear@26: scan += 2, match++; nuclear@26: Assert(*scan == *match, "match[2]?"); nuclear@26: nuclear@26: /* We check for insufficient lookahead only every 8th comparison; nuclear@26: * the 256th check will be made at strstart+258. nuclear@26: */ nuclear@26: do { nuclear@26: } while (*++scan == *++match && *++scan == *++match && nuclear@26: *++scan == *++match && *++scan == *++match && nuclear@26: *++scan == *++match && *++scan == *++match && nuclear@26: *++scan == *++match && *++scan == *++match && nuclear@26: scan < strend); nuclear@26: nuclear@26: Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); nuclear@26: nuclear@26: len = MAX_MATCH - (int)(strend - scan); nuclear@26: scan = strend - MAX_MATCH; nuclear@26: nuclear@26: #endif /* UNALIGNED_OK */ nuclear@26: nuclear@26: if (len > best_len) { nuclear@26: s->match_start = cur_match; nuclear@26: best_len = len; nuclear@26: if (len >= nice_match) break; nuclear@26: #ifdef UNALIGNED_OK nuclear@26: scan_end = *(ushf*)(scan+best_len-1); nuclear@26: #else nuclear@26: scan_end1 = scan[best_len-1]; nuclear@26: scan_end = scan[best_len]; nuclear@26: #endif nuclear@26: } nuclear@26: } while ((cur_match = prev[cur_match & wmask]) > limit nuclear@26: && --chain_length != 0); nuclear@26: nuclear@26: if ((uInt)best_len <= s->lookahead) return (uInt)best_len; nuclear@26: return s->lookahead; nuclear@26: } nuclear@26: #endif /* ASMV */ nuclear@26: #endif /* FASTEST */ nuclear@26: nuclear@26: /* --------------------------------------------------------------------------- nuclear@26: * Optimized version for level == 1 or strategy == Z_RLE only nuclear@26: */ nuclear@26: local uInt longest_match_fast(s, cur_match) nuclear@26: deflate_state *s; nuclear@26: IPos cur_match; /* current match */ nuclear@26: { nuclear@26: register Bytef *scan = s->window + s->strstart; /* current string */ nuclear@26: register Bytef *match; /* matched string */ nuclear@26: register int len; /* length of current match */ nuclear@26: register Bytef *strend = s->window + s->strstart + MAX_MATCH; nuclear@26: nuclear@26: /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. nuclear@26: * It is easy to get rid of this optimization if necessary. nuclear@26: */ nuclear@26: Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); nuclear@26: nuclear@26: Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); nuclear@26: nuclear@26: Assert(cur_match < s->strstart, "no future"); nuclear@26: nuclear@26: match = s->window + cur_match; nuclear@26: nuclear@26: /* Return failure if the match length is less than 2: nuclear@26: */ nuclear@26: if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; nuclear@26: nuclear@26: /* The check at best_len-1 can be removed because it will be made nuclear@26: * again later. (This heuristic is not always a win.) nuclear@26: * It is not necessary to compare scan[2] and match[2] since they nuclear@26: * are always equal when the other bytes match, given that nuclear@26: * the hash keys are equal and that HASH_BITS >= 8. nuclear@26: */ nuclear@26: scan += 2, match += 2; nuclear@26: Assert(*scan == *match, "match[2]?"); nuclear@26: nuclear@26: /* We check for insufficient lookahead only every 8th comparison; nuclear@26: * the 256th check will be made at strstart+258. nuclear@26: */ nuclear@26: do { nuclear@26: } while (*++scan == *++match && *++scan == *++match && nuclear@26: *++scan == *++match && *++scan == *++match && nuclear@26: *++scan == *++match && *++scan == *++match && nuclear@26: *++scan == *++match && *++scan == *++match && nuclear@26: scan < strend); nuclear@26: nuclear@26: Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); nuclear@26: nuclear@26: len = MAX_MATCH - (int)(strend - scan); nuclear@26: nuclear@26: if (len < MIN_MATCH) return MIN_MATCH - 1; nuclear@26: nuclear@26: s->match_start = cur_match; nuclear@26: return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; nuclear@26: } nuclear@26: nuclear@26: #ifdef DEBUG nuclear@26: /* =========================================================================== nuclear@26: * Check that the match at match_start is indeed a match. nuclear@26: */ nuclear@26: local void check_match(s, start, match, length) nuclear@26: deflate_state *s; nuclear@26: IPos start, match; nuclear@26: int length; nuclear@26: { nuclear@26: /* check that the match is indeed a match */ nuclear@26: if (zmemcmp(s->window + match, nuclear@26: s->window + start, length) != EQUAL) { nuclear@26: fprintf(stderr, " start %u, match %u, length %d\n", nuclear@26: start, match, length); nuclear@26: do { nuclear@26: fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); nuclear@26: } while (--length != 0); nuclear@26: z_error("invalid match"); nuclear@26: } nuclear@26: if (z_verbose > 1) { nuclear@26: fprintf(stderr,"\\[%d,%d]", start-match, length); nuclear@26: do { putc(s->window[start++], stderr); } while (--length != 0); nuclear@26: } nuclear@26: } nuclear@26: #else nuclear@26: # define check_match(s, start, match, length) nuclear@26: #endif /* DEBUG */ nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Fill the window when the lookahead becomes insufficient. nuclear@26: * Updates strstart and lookahead. nuclear@26: * nuclear@26: * IN assertion: lookahead < MIN_LOOKAHEAD nuclear@26: * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD nuclear@26: * At least one byte has been read, or avail_in == 0; reads are nuclear@26: * performed for at least two bytes (required for the zip translate_eol nuclear@26: * option -- not supported here). nuclear@26: */ nuclear@26: local void fill_window(s) nuclear@26: deflate_state *s; nuclear@26: { nuclear@26: register unsigned n, m; nuclear@26: register Posf *p; nuclear@26: unsigned more; /* Amount of free space at the end of the window. */ nuclear@26: uInt wsize = s->w_size; nuclear@26: nuclear@26: do { nuclear@26: more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); nuclear@26: nuclear@26: /* Deal with !@#$% 64K limit: */ nuclear@26: if (sizeof(int) <= 2) { nuclear@26: if (more == 0 && s->strstart == 0 && s->lookahead == 0) { nuclear@26: more = wsize; nuclear@26: nuclear@26: } else if (more == (unsigned)(-1)) { nuclear@26: /* Very unlikely, but possible on 16 bit machine if nuclear@26: * strstart == 0 && lookahead == 1 (input done a byte at time) nuclear@26: */ nuclear@26: more--; nuclear@26: } nuclear@26: } nuclear@26: nuclear@26: /* If the window is almost full and there is insufficient lookahead, nuclear@26: * move the upper half to the lower one to make room in the upper half. nuclear@26: */ nuclear@26: if (s->strstart >= wsize+MAX_DIST(s)) { nuclear@26: nuclear@26: zmemcpy(s->window, s->window+wsize, (unsigned)wsize); nuclear@26: s->match_start -= wsize; nuclear@26: s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ nuclear@26: s->block_start -= (long) wsize; nuclear@26: nuclear@26: /* Slide the hash table (could be avoided with 32 bit values nuclear@26: at the expense of memory usage). We slide even when level == 0 nuclear@26: to keep the hash table consistent if we switch back to level > 0 nuclear@26: later. (Using level 0 permanently is not an optimal usage of nuclear@26: zlib, so we don't care about this pathological case.) nuclear@26: */ nuclear@26: /* %%% avoid this when Z_RLE */ nuclear@26: n = s->hash_size; nuclear@26: p = &s->head[n]; nuclear@26: do { nuclear@26: m = *--p; nuclear@26: *p = (Pos)(m >= wsize ? m-wsize : NIL); nuclear@26: } while (--n); nuclear@26: nuclear@26: n = wsize; nuclear@26: #ifndef FASTEST nuclear@26: p = &s->prev[n]; nuclear@26: do { nuclear@26: m = *--p; nuclear@26: *p = (Pos)(m >= wsize ? m-wsize : NIL); nuclear@26: /* If n is not on any hash chain, prev[n] is garbage but nuclear@26: * its value will never be used. nuclear@26: */ nuclear@26: } while (--n); nuclear@26: #endif nuclear@26: more += wsize; nuclear@26: } nuclear@26: if (s->strm->avail_in == 0) return; nuclear@26: nuclear@26: /* If there was no sliding: nuclear@26: * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && nuclear@26: * more == window_size - lookahead - strstart nuclear@26: * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) nuclear@26: * => more >= window_size - 2*WSIZE + 2 nuclear@26: * In the BIG_MEM or MMAP case (not yet supported), nuclear@26: * window_size == input_size + MIN_LOOKAHEAD && nuclear@26: * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. nuclear@26: * Otherwise, window_size == 2*WSIZE so more >= 2. nuclear@26: * If there was sliding, more >= WSIZE. So in all cases, more >= 2. nuclear@26: */ nuclear@26: Assert(more >= 2, "more < 2"); nuclear@26: nuclear@26: n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); nuclear@26: s->lookahead += n; nuclear@26: nuclear@26: /* Initialize the hash value now that we have some input: */ nuclear@26: if (s->lookahead >= MIN_MATCH) { nuclear@26: s->ins_h = s->window[s->strstart]; nuclear@26: UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); nuclear@26: #if MIN_MATCH != 3 nuclear@26: Call UPDATE_HASH() MIN_MATCH-3 more times nuclear@26: #endif nuclear@26: } nuclear@26: /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, nuclear@26: * but this is not important since only literal bytes will be emitted. nuclear@26: */ nuclear@26: nuclear@26: } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); nuclear@26: } nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Flush the current block, with given end-of-file flag. nuclear@26: * IN assertion: strstart is set to the end of the current match. nuclear@26: */ nuclear@26: #define FLUSH_BLOCK_ONLY(s, eof) { \ nuclear@26: _tr_flush_block(s, (s->block_start >= 0L ? \ nuclear@26: (charf *)&s->window[(unsigned)s->block_start] : \ nuclear@26: (charf *)Z_NULL), \ nuclear@26: (ulg)((long)s->strstart - s->block_start), \ nuclear@26: (eof)); \ nuclear@26: s->block_start = s->strstart; \ nuclear@26: flush_pending(s->strm); \ nuclear@26: Tracev((stderr,"[FLUSH]")); \ nuclear@26: } nuclear@26: nuclear@26: /* Same but force premature exit if necessary. */ nuclear@26: #define FLUSH_BLOCK(s, eof) { \ nuclear@26: FLUSH_BLOCK_ONLY(s, eof); \ nuclear@26: if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ nuclear@26: } nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Copy without compression as much as possible from the input stream, return nuclear@26: * the current block state. nuclear@26: * This function does not insert new strings in the dictionary since nuclear@26: * uncompressible data is probably not useful. This function is used nuclear@26: * only for the level=0 compression option. nuclear@26: * NOTE: this function should be optimized to avoid extra copying from nuclear@26: * window to pending_buf. nuclear@26: */ nuclear@26: local block_state deflate_stored(s, flush) nuclear@26: deflate_state *s; nuclear@26: int flush; nuclear@26: { nuclear@26: /* Stored blocks are limited to 0xffff bytes, pending_buf is limited nuclear@26: * to pending_buf_size, and each stored block has a 5 byte header: nuclear@26: */ nuclear@26: ulg max_block_size = 0xffff; nuclear@26: ulg max_start; nuclear@26: nuclear@26: if (max_block_size > s->pending_buf_size - 5) { nuclear@26: max_block_size = s->pending_buf_size - 5; nuclear@26: } nuclear@26: nuclear@26: /* Copy as much as possible from input to output: */ nuclear@26: for (;;) { nuclear@26: /* Fill the window as much as possible: */ nuclear@26: if (s->lookahead <= 1) { nuclear@26: nuclear@26: Assert(s->strstart < s->w_size+MAX_DIST(s) || nuclear@26: s->block_start >= (long)s->w_size, "slide too late"); nuclear@26: nuclear@26: fill_window(s); nuclear@26: if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; nuclear@26: nuclear@26: if (s->lookahead == 0) break; /* flush the current block */ nuclear@26: } nuclear@26: Assert(s->block_start >= 0L, "block gone"); nuclear@26: nuclear@26: s->strstart += s->lookahead; nuclear@26: s->lookahead = 0; nuclear@26: nuclear@26: /* Emit a stored block if pending_buf will be full: */ nuclear@26: max_start = s->block_start + max_block_size; nuclear@26: if (s->strstart == 0 || (ulg)s->strstart >= max_start) { nuclear@26: /* strstart == 0 is possible when wraparound on 16-bit machine */ nuclear@26: s->lookahead = (uInt)(s->strstart - max_start); nuclear@26: s->strstart = (uInt)max_start; nuclear@26: FLUSH_BLOCK(s, 0); nuclear@26: } nuclear@26: /* Flush if we may have to slide, otherwise block_start may become nuclear@26: * negative and the data will be gone: nuclear@26: */ nuclear@26: if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { nuclear@26: FLUSH_BLOCK(s, 0); nuclear@26: } nuclear@26: } nuclear@26: FLUSH_BLOCK(s, flush == Z_FINISH); nuclear@26: return flush == Z_FINISH ? finish_done : block_done; nuclear@26: } nuclear@26: nuclear@26: /* =========================================================================== nuclear@26: * Compress as much as possible from the input stream, return the current nuclear@26: * block state. nuclear@26: * This function does not perform lazy evaluation of matches and inserts nuclear@26: * new strings in the dictionary only for unmatched strings or for short nuclear@26: * matches. It is used only for the fast compression options. nuclear@26: */ nuclear@26: local block_state deflate_fast(s, flush) nuclear@26: deflate_state *s; nuclear@26: int flush; nuclear@26: { nuclear@26: IPos hash_head = NIL; /* head of the hash chain */ nuclear@26: int bflush; /* set if current block must be flushed */ nuclear@26: nuclear@26: for (;;) { nuclear@26: /* Make sure that we always have enough lookahead, except nuclear@26: * at the end of the input file. We need MAX_MATCH bytes nuclear@26: * for the next match, plus MIN_MATCH bytes to insert the nuclear@26: * string following the next match. nuclear@26: */ nuclear@26: if (s->lookahead < MIN_LOOKAHEAD) { nuclear@26: fill_window(s); nuclear@26: if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { nuclear@26: return need_more; nuclear@26: } nuclear@26: if (s->lookahead == 0) break; /* flush the current block */ nuclear@26: } nuclear@26: nuclear@26: /* Insert the string window[strstart .. strstart+2] in the nuclear@26: * dictionary, and set hash_head to the head of the hash chain: nuclear@26: */ nuclear@26: if (s->lookahead >= MIN_MATCH) { nuclear@26: INSERT_STRING(s, s->strstart, hash_head); nuclear@26: } nuclear@26: nuclear@26: /* Find the longest match, discarding those <= prev_length. nuclear@26: * At this point we have always match_length < MIN_MATCH nuclear@26: */ nuclear@26: if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { nuclear@26: /* To simplify the code, we prevent matches with the string nuclear@26: * of window index 0 (in particular we have to avoid a match nuclear@26: * of the string with itself at the start of the input file). nuclear@26: */ nuclear@26: #ifdef FASTEST nuclear@26: if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) || nuclear@26: (s->strategy == Z_RLE && s->strstart - hash_head == 1)) { nuclear@26: s->match_length = longest_match_fast (s, hash_head); nuclear@26: } nuclear@26: #else nuclear@26: if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { nuclear@26: s->match_length = longest_match (s, hash_head); nuclear@26: } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { nuclear@26: s->match_length = longest_match_fast (s, hash_head); nuclear@26: } nuclear@26: #endif nuclear@26: /* longest_match() or longest_match_fast() sets match_start */ nuclear@26: } nuclear@26: if (s->match_length >= MIN_MATCH) { nuclear@26: check_match(s, s->strstart, s->match_start, s->match_length); nuclear@26: nuclear@26: _tr_tally_dist(s, s->strstart - s->match_start, nuclear@26: s->match_length - MIN_MATCH, bflush); nuclear@26: nuclear@26: s->lookahead -= s->match_length; nuclear@26: nuclear@26: /* Insert new strings in the hash table only if the match length nuclear@26: * is not too large. This saves time but degrades compression. nuclear@26: */ nuclear@26: #ifndef FASTEST nuclear@26: if (s->match_length <= s->max_insert_length && nuclear@26: s->lookahead >= MIN_MATCH) { nuclear@26: s->match_length--; /* string at strstart already in table */ nuclear@26: do { nuclear@26: s->strstart++; nuclear@26: INSERT_STRING(s, s->strstart, hash_head); nuclear@26: /* strstart never exceeds WSIZE-MAX_MATCH, so there are nuclear@26: * always MIN_MATCH bytes ahead. nuclear@26: */ nuclear@26: } while (--s->match_length != 0); nuclear@26: s->strstart++; nuclear@26: } else nuclear@26: #endif nuclear@26: { nuclear@26: s->strstart += s->match_length; nuclear@26: s->match_length = 0; nuclear@26: s->ins_h = s->window[s->strstart]; nuclear@26: UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); nuclear@26: #if MIN_MATCH != 3 nuclear@26: Call UPDATE_HASH() MIN_MATCH-3 more times nuclear@26: #endif nuclear@26: /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not nuclear@26: * matter since it will be recomputed at next deflate call. nuclear@26: */ nuclear@26: } nuclear@26: } else { nuclear@26: /* No match, output a literal byte */ nuclear@26: Tracevv((stderr,"%c", s->window[s->strstart])); nuclear@26: _tr_tally_lit (s, s->window[s->strstart], bflush); nuclear@26: s->lookahead--; nuclear@26: s->strstart++; nuclear@26: } nuclear@26: if (bflush) FLUSH_BLOCK(s, 0); nuclear@26: } nuclear@26: FLUSH_BLOCK(s, flush == Z_FINISH); nuclear@26: return flush == Z_FINISH ? finish_done : block_done; nuclear@26: } nuclear@26: nuclear@26: #ifndef FASTEST nuclear@26: /* =========================================================================== nuclear@26: * Same as above, but achieves better compression. We use a lazy nuclear@26: * evaluation for matches: a match is finally adopted only if there is nuclear@26: * no better match at the next window position. nuclear@26: */ nuclear@26: local block_state deflate_slow(s, flush) nuclear@26: deflate_state *s; nuclear@26: int flush; nuclear@26: { nuclear@26: IPos hash_head = NIL; /* head of hash chain */ nuclear@26: int bflush; /* set if current block must be flushed */ nuclear@26: nuclear@26: /* Process the input block. */ nuclear@26: for (;;) { nuclear@26: /* Make sure that we always have enough lookahead, except nuclear@26: * at the end of the input file. We need MAX_MATCH bytes nuclear@26: * for the next match, plus MIN_MATCH bytes to insert the nuclear@26: * string following the next match. nuclear@26: */ nuclear@26: if (s->lookahead < MIN_LOOKAHEAD) { nuclear@26: fill_window(s); nuclear@26: if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { nuclear@26: return need_more; nuclear@26: } nuclear@26: if (s->lookahead == 0) break; /* flush the current block */ nuclear@26: } nuclear@26: nuclear@26: /* Insert the string window[strstart .. strstart+2] in the nuclear@26: * dictionary, and set hash_head to the head of the hash chain: nuclear@26: */ nuclear@26: if (s->lookahead >= MIN_MATCH) { nuclear@26: INSERT_STRING(s, s->strstart, hash_head); nuclear@26: } nuclear@26: nuclear@26: /* Find the longest match, discarding those <= prev_length. nuclear@26: */ nuclear@26: s->prev_length = s->match_length, s->prev_match = s->match_start; nuclear@26: s->match_length = MIN_MATCH-1; nuclear@26: nuclear@26: if (hash_head != NIL && s->prev_length < s->max_lazy_match && nuclear@26: s->strstart - hash_head <= MAX_DIST(s)) { nuclear@26: /* To simplify the code, we prevent matches with the string nuclear@26: * of window index 0 (in particular we have to avoid a match nuclear@26: * of the string with itself at the start of the input file). nuclear@26: */ nuclear@26: if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { nuclear@26: s->match_length = longest_match (s, hash_head); nuclear@26: } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { nuclear@26: s->match_length = longest_match_fast (s, hash_head); nuclear@26: } nuclear@26: /* longest_match() or longest_match_fast() sets match_start */ nuclear@26: nuclear@26: if (s->match_length <= 5 && (s->strategy == Z_FILTERED nuclear@26: #if TOO_FAR <= 32767 nuclear@26: || (s->match_length == MIN_MATCH && nuclear@26: s->strstart - s->match_start > TOO_FAR) nuclear@26: #endif nuclear@26: )) { nuclear@26: nuclear@26: /* If prev_match is also MIN_MATCH, match_start is garbage nuclear@26: * but we will ignore the current match anyway. nuclear@26: */ nuclear@26: s->match_length = MIN_MATCH-1; nuclear@26: } nuclear@26: } nuclear@26: /* If there was a match at the previous step and the current nuclear@26: * match is not better, output the previous match: nuclear@26: */ nuclear@26: if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { nuclear@26: uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; nuclear@26: /* Do not insert strings in hash table beyond this. */ nuclear@26: nuclear@26: check_match(s, s->strstart-1, s->prev_match, s->prev_length); nuclear@26: nuclear@26: _tr_tally_dist(s, s->strstart -1 - s->prev_match, nuclear@26: s->prev_length - MIN_MATCH, bflush); nuclear@26: nuclear@26: /* Insert in hash table all strings up to the end of the match. nuclear@26: * strstart-1 and strstart are already inserted. If there is not nuclear@26: * enough lookahead, the last two strings are not inserted in nuclear@26: * the hash table. nuclear@26: */ nuclear@26: s->lookahead -= s->prev_length-1; nuclear@26: s->prev_length -= 2; nuclear@26: do { nuclear@26: if (++s->strstart <= max_insert) { nuclear@26: INSERT_STRING(s, s->strstart, hash_head); nuclear@26: } nuclear@26: } while (--s->prev_length != 0); nuclear@26: s->match_available = 0; nuclear@26: s->match_length = MIN_MATCH-1; nuclear@26: s->strstart++; nuclear@26: nuclear@26: if (bflush) FLUSH_BLOCK(s, 0); nuclear@26: nuclear@26: } else if (s->match_available) { nuclear@26: /* If there was no match at the previous position, output a nuclear@26: * single literal. If there was a match but the current match nuclear@26: * is longer, truncate the previous match to a single literal. nuclear@26: */ nuclear@26: Tracevv((stderr,"%c", s->window[s->strstart-1])); nuclear@26: _tr_tally_lit(s, s->window[s->strstart-1], bflush); nuclear@26: if (bflush) { nuclear@26: FLUSH_BLOCK_ONLY(s, 0); nuclear@26: } nuclear@26: s->strstart++; nuclear@26: s->lookahead--; nuclear@26: if (s->strm->avail_out == 0) return need_more; nuclear@26: } else { nuclear@26: /* There is no previous match to compare with, wait for nuclear@26: * the next step to decide. nuclear@26: */ nuclear@26: s->match_available = 1; nuclear@26: s->strstart++; nuclear@26: s->lookahead--; nuclear@26: } nuclear@26: } nuclear@26: Assert (flush != Z_NO_FLUSH, "no flush?"); nuclear@26: if (s->match_available) { nuclear@26: Tracevv((stderr,"%c", s->window[s->strstart-1])); nuclear@26: _tr_tally_lit(s, s->window[s->strstart-1], bflush); nuclear@26: s->match_available = 0; nuclear@26: } nuclear@26: FLUSH_BLOCK(s, flush == Z_FINISH); nuclear@26: return flush == Z_FINISH ? finish_done : block_done; nuclear@26: } nuclear@26: #endif /* FASTEST */ nuclear@26: nuclear@26: #if 0 nuclear@26: /* =========================================================================== nuclear@26: * For Z_RLE, simply look for runs of bytes, generate matches only of distance nuclear@26: * one. Do not maintain a hash table. (It will be regenerated if this run of nuclear@26: * deflate switches away from Z_RLE.) nuclear@26: */ nuclear@26: local block_state deflate_rle(s, flush) nuclear@26: deflate_state *s; nuclear@26: int flush; nuclear@26: { nuclear@26: int bflush; /* set if current block must be flushed */ nuclear@26: uInt run; /* length of run */ nuclear@26: uInt max; /* maximum length of run */ nuclear@26: uInt prev; /* byte at distance one to match */ nuclear@26: Bytef *scan; /* scan for end of run */ nuclear@26: nuclear@26: for (;;) { nuclear@26: /* Make sure that we always have enough lookahead, except nuclear@26: * at the end of the input file. We need MAX_MATCH bytes nuclear@26: * for the longest encodable run. nuclear@26: */ nuclear@26: if (s->lookahead < MAX_MATCH) { nuclear@26: fill_window(s); nuclear@26: if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) { nuclear@26: return need_more; nuclear@26: } nuclear@26: if (s->lookahead == 0) break; /* flush the current block */ nuclear@26: } nuclear@26: nuclear@26: /* See how many times the previous byte repeats */ nuclear@26: run = 0; nuclear@26: if (s->strstart > 0) { /* if there is a previous byte, that is */ nuclear@26: max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH; nuclear@26: scan = s->window + s->strstart - 1; nuclear@26: prev = *scan++; nuclear@26: do { nuclear@26: if (*scan++ != prev) nuclear@26: break; nuclear@26: } while (++run < max); nuclear@26: } nuclear@26: nuclear@26: /* Emit match if have run of MIN_MATCH or longer, else emit literal */ nuclear@26: if (run >= MIN_MATCH) { nuclear@26: check_match(s, s->strstart, s->strstart - 1, run); nuclear@26: _tr_tally_dist(s, 1, run - MIN_MATCH, bflush); nuclear@26: s->lookahead -= run; nuclear@26: s->strstart += run; nuclear@26: } else { nuclear@26: /* No match, output a literal byte */ nuclear@26: Tracevv((stderr,"%c", s->window[s->strstart])); nuclear@26: _tr_tally_lit (s, s->window[s->strstart], bflush); nuclear@26: s->lookahead--; nuclear@26: s->strstart++; nuclear@26: } nuclear@26: if (bflush) FLUSH_BLOCK(s, 0); nuclear@26: } nuclear@26: FLUSH_BLOCK(s, flush == Z_FINISH); nuclear@26: return flush == Z_FINISH ? finish_done : block_done; nuclear@26: } nuclear@26: #endif