nuclear@26: /*
nuclear@26:  * jcmaster.c
nuclear@26:  *
nuclear@26:  * Copyright (C) 1991-1997, Thomas G. Lane.
nuclear@26:  * This file is part of the Independent JPEG Group's software.
nuclear@26:  * For conditions of distribution and use, see the accompanying README file.
nuclear@26:  *
nuclear@26:  * This file contains master control logic for the JPEG compressor.
nuclear@26:  * These routines are concerned with parameter validation, initial setup,
nuclear@26:  * and inter-pass control (determining the number of passes and the work 
nuclear@26:  * to be done in each pass).
nuclear@26:  */
nuclear@26: 
nuclear@26: #define JPEG_INTERNALS
nuclear@26: #include "jinclude.h"
nuclear@26: #include "jpeglib.h"
nuclear@26: 
nuclear@26: 
nuclear@26: /* Private state */
nuclear@26: 
nuclear@26: typedef enum {
nuclear@26: 	main_pass,		/* input data, also do first output step */
nuclear@26: 	huff_opt_pass,		/* Huffman code optimization pass */
nuclear@26: 	output_pass		/* data output pass */
nuclear@26: } c_pass_type;
nuclear@26: 
nuclear@26: typedef struct {
nuclear@26:   struct jpeg_comp_master pub;	/* public fields */
nuclear@26: 
nuclear@26:   c_pass_type pass_type;	/* the type of the current pass */
nuclear@26: 
nuclear@26:   int pass_number;		/* # of passes completed */
nuclear@26:   int total_passes;		/* total # of passes needed */
nuclear@26: 
nuclear@26:   int scan_number;		/* current index in scan_info[] */
nuclear@26: } my_comp_master;
nuclear@26: 
nuclear@26: typedef my_comp_master * my_master_ptr;
nuclear@26: 
nuclear@26: 
nuclear@26: /*
nuclear@26:  * Support routines that do various essential calculations.
nuclear@26:  */
nuclear@26: 
nuclear@26: LOCAL(void)
nuclear@26: initial_setup (j_compress_ptr cinfo)
nuclear@26: /* Do computations that are needed before master selection phase */
nuclear@26: {
nuclear@26:   int ci;
nuclear@26:   jpeg_component_info *compptr;
nuclear@26:   long samplesperrow;
nuclear@26:   JDIMENSION jd_samplesperrow;
nuclear@26: 
nuclear@26:   /* Sanity check on image dimensions */
nuclear@26:   if (cinfo->image_height <= 0 || cinfo->image_width <= 0
nuclear@26:       || cinfo->num_components <= 0 || cinfo->input_components <= 0)
nuclear@26:     ERREXIT(cinfo, JERR_EMPTY_IMAGE);
nuclear@26: 
nuclear@26:   /* Make sure image isn't bigger than I can handle */
nuclear@26:   if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
nuclear@26:       (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
nuclear@26:     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
nuclear@26: 
nuclear@26:   /* Width of an input scanline must be representable as JDIMENSION. */
nuclear@26:   samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
nuclear@26:   jd_samplesperrow = (JDIMENSION) samplesperrow;
nuclear@26:   if ((long) jd_samplesperrow != samplesperrow)
nuclear@26:     ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
nuclear@26: 
nuclear@26:   /* For now, precision must match compiled-in value... */
nuclear@26:   if (cinfo->data_precision != BITS_IN_JSAMPLE)
nuclear@26:     ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
nuclear@26: 
nuclear@26:   /* Check that number of components won't exceed internal array sizes */
nuclear@26:   if (cinfo->num_components > MAX_COMPONENTS)
nuclear@26:     ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
nuclear@26: 	     MAX_COMPONENTS);
nuclear@26: 
nuclear@26:   /* Compute maximum sampling factors; check factor validity */
nuclear@26:   cinfo->max_h_samp_factor = 1;
nuclear@26:   cinfo->max_v_samp_factor = 1;
nuclear@26:   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
nuclear@26:        ci++, compptr++) {
nuclear@26:     if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
nuclear@26: 	compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
nuclear@26:       ERREXIT(cinfo, JERR_BAD_SAMPLING);
nuclear@26:     cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
nuclear@26: 				   compptr->h_samp_factor);
nuclear@26:     cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
nuclear@26: 				   compptr->v_samp_factor);
nuclear@26:   }
nuclear@26: 
nuclear@26:   /* Compute dimensions of components */
nuclear@26:   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
nuclear@26:        ci++, compptr++) {
nuclear@26:     /* Fill in the correct component_index value; don't rely on application */
nuclear@26:     compptr->component_index = ci;
nuclear@26:     /* For compression, we never do DCT scaling. */
nuclear@26:     compptr->DCT_scaled_size = DCTSIZE;
nuclear@26:     /* Size in DCT blocks */
nuclear@26:     compptr->width_in_blocks = (JDIMENSION)
nuclear@26:       jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
nuclear@26: 		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
nuclear@26:     compptr->height_in_blocks = (JDIMENSION)
nuclear@26:       jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
nuclear@26: 		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
nuclear@26:     /* Size in samples */
nuclear@26:     compptr->downsampled_width = (JDIMENSION)
nuclear@26:       jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
nuclear@26: 		    (long) cinfo->max_h_samp_factor);
nuclear@26:     compptr->downsampled_height = (JDIMENSION)
nuclear@26:       jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
nuclear@26: 		    (long) cinfo->max_v_samp_factor);
nuclear@26:     /* Mark component needed (this flag isn't actually used for compression) */
nuclear@26:     compptr->component_needed = TRUE;
nuclear@26:   }
nuclear@26: 
nuclear@26:   /* Compute number of fully interleaved MCU rows (number of times that
nuclear@26:    * main controller will call coefficient controller).
nuclear@26:    */
nuclear@26:   cinfo->total_iMCU_rows = (JDIMENSION)
nuclear@26:     jdiv_round_up((long) cinfo->image_height,
nuclear@26: 		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
nuclear@26: }
nuclear@26: 
nuclear@26: 
nuclear@26: #ifdef C_MULTISCAN_FILES_SUPPORTED
nuclear@26: 
nuclear@26: LOCAL(void)
nuclear@26: validate_script (j_compress_ptr cinfo)
nuclear@26: /* Verify that the scan script in cinfo->scan_info[] is valid; also
nuclear@26:  * determine whether it uses progressive JPEG, and set cinfo->progressive_mode.
nuclear@26:  */
nuclear@26: {
nuclear@26:   const jpeg_scan_info * scanptr;
nuclear@26:   int scanno, ncomps, ci, coefi, thisi;
nuclear@26:   int Ss, Se, Ah, Al;
nuclear@26:   boolean component_sent[MAX_COMPONENTS];
nuclear@26: #ifdef C_PROGRESSIVE_SUPPORTED
nuclear@26:   int * last_bitpos_ptr;
nuclear@26:   int last_bitpos[MAX_COMPONENTS][DCTSIZE2];
nuclear@26:   /* -1 until that coefficient has been seen; then last Al for it */
nuclear@26: #endif
nuclear@26: 
nuclear@26:   if (cinfo->num_scans <= 0)
nuclear@26:     ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0);
nuclear@26: 
nuclear@26:   /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1;
nuclear@26:    * for progressive JPEG, no scan can have this.
nuclear@26:    */
nuclear@26:   scanptr = cinfo->scan_info;
nuclear@26:   if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) {
nuclear@26: #ifdef C_PROGRESSIVE_SUPPORTED
nuclear@26:     cinfo->progressive_mode = TRUE;
nuclear@26:     last_bitpos_ptr = & last_bitpos[0][0];
nuclear@26:     for (ci = 0; ci < cinfo->num_components; ci++) 
nuclear@26:       for (coefi = 0; coefi < DCTSIZE2; coefi++)
nuclear@26: 	*last_bitpos_ptr++ = -1;
nuclear@26: #else
nuclear@26:     ERREXIT(cinfo, JERR_NOT_COMPILED);
nuclear@26: #endif
nuclear@26:   } else {
nuclear@26:     cinfo->progressive_mode = FALSE;
nuclear@26:     for (ci = 0; ci < cinfo->num_components; ci++) 
nuclear@26:       component_sent[ci] = FALSE;
nuclear@26:   }
nuclear@26: 
nuclear@26:   for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) {
nuclear@26:     /* Validate component indexes */
nuclear@26:     ncomps = scanptr->comps_in_scan;
nuclear@26:     if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN)
nuclear@26:       ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN);
nuclear@26:     for (ci = 0; ci < ncomps; ci++) {
nuclear@26:       thisi = scanptr->component_index[ci];
nuclear@26:       if (thisi < 0 || thisi >= cinfo->num_components)
nuclear@26: 	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
nuclear@26:       /* Components must appear in SOF order within each scan */
nuclear@26:       if (ci > 0 && thisi <= scanptr->component_index[ci-1])
nuclear@26: 	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
nuclear@26:     }
nuclear@26:     /* Validate progression parameters */
nuclear@26:     Ss = scanptr->Ss;
nuclear@26:     Se = scanptr->Se;
nuclear@26:     Ah = scanptr->Ah;
nuclear@26:     Al = scanptr->Al;
nuclear@26:     if (cinfo->progressive_mode) {
nuclear@26: #ifdef C_PROGRESSIVE_SUPPORTED
nuclear@26:       /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
nuclear@26:        * seems wrong: the upper bound ought to depend on data precision.
nuclear@26:        * Perhaps they really meant 0..N+1 for N-bit precision.
nuclear@26:        * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
nuclear@26:        * out-of-range reconstructed DC values during the first DC scan,
nuclear@26:        * which might cause problems for some decoders.
nuclear@26:        */
nuclear@26: #if BITS_IN_JSAMPLE == 8
nuclear@26: #define MAX_AH_AL 10
nuclear@26: #else
nuclear@26: #define MAX_AH_AL 13
nuclear@26: #endif
nuclear@26:       if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
nuclear@26: 	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
nuclear@26: 	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
nuclear@26:       if (Ss == 0) {
nuclear@26: 	if (Se != 0)		/* DC and AC together not OK */
nuclear@26: 	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
nuclear@26:       } else {
nuclear@26: 	if (ncomps != 1)	/* AC scans must be for only one component */
nuclear@26: 	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
nuclear@26:       }
nuclear@26:       for (ci = 0; ci < ncomps; ci++) {
nuclear@26: 	last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0];
nuclear@26: 	if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */
nuclear@26: 	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
nuclear@26: 	for (coefi = Ss; coefi <= Se; coefi++) {
nuclear@26: 	  if (last_bitpos_ptr[coefi] < 0) {
nuclear@26: 	    /* first scan of this coefficient */
nuclear@26: 	    if (Ah != 0)
nuclear@26: 	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
nuclear@26: 	  } else {
nuclear@26: 	    /* not first scan */
nuclear@26: 	    if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1)
nuclear@26: 	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
nuclear@26: 	  }
nuclear@26: 	  last_bitpos_ptr[coefi] = Al;
nuclear@26: 	}
nuclear@26:       }
nuclear@26: #endif
nuclear@26:     } else {
nuclear@26:       /* For sequential JPEG, all progression parameters must be these: */
nuclear@26:       if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0)
nuclear@26: 	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
nuclear@26:       /* Make sure components are not sent twice */
nuclear@26:       for (ci = 0; ci < ncomps; ci++) {
nuclear@26: 	thisi = scanptr->component_index[ci];
nuclear@26: 	if (component_sent[thisi])
nuclear@26: 	  ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
nuclear@26: 	component_sent[thisi] = TRUE;
nuclear@26:       }
nuclear@26:     }
nuclear@26:   }
nuclear@26: 
nuclear@26:   /* Now verify that everything got sent. */
nuclear@26:   if (cinfo->progressive_mode) {
nuclear@26: #ifdef C_PROGRESSIVE_SUPPORTED
nuclear@26:     /* For progressive mode, we only check that at least some DC data
nuclear@26:      * got sent for each component; the spec does not require that all bits
nuclear@26:      * of all coefficients be transmitted.  Would it be wiser to enforce
nuclear@26:      * transmission of all coefficient bits??
nuclear@26:      */
nuclear@26:     for (ci = 0; ci < cinfo->num_components; ci++) {
nuclear@26:       if (last_bitpos[ci][0] < 0)
nuclear@26: 	ERREXIT(cinfo, JERR_MISSING_DATA);
nuclear@26:     }
nuclear@26: #endif
nuclear@26:   } else {
nuclear@26:     for (ci = 0; ci < cinfo->num_components; ci++) {
nuclear@26:       if (! component_sent[ci])
nuclear@26: 	ERREXIT(cinfo, JERR_MISSING_DATA);
nuclear@26:     }
nuclear@26:   }
nuclear@26: }
nuclear@26: 
nuclear@26: #endif /* C_MULTISCAN_FILES_SUPPORTED */
nuclear@26: 
nuclear@26: 
nuclear@26: LOCAL(void)
nuclear@26: select_scan_parameters (j_compress_ptr cinfo)
nuclear@26: /* Set up the scan parameters for the current scan */
nuclear@26: {
nuclear@26:   int ci;
nuclear@26: 
nuclear@26: #ifdef C_MULTISCAN_FILES_SUPPORTED
nuclear@26:   if (cinfo->scan_info != NULL) {
nuclear@26:     /* Prepare for current scan --- the script is already validated */
nuclear@26:     my_master_ptr master = (my_master_ptr) cinfo->master;
nuclear@26:     const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number;
nuclear@26: 
nuclear@26:     cinfo->comps_in_scan = scanptr->comps_in_scan;
nuclear@26:     for (ci = 0; ci < scanptr->comps_in_scan; ci++) {
nuclear@26:       cinfo->cur_comp_info[ci] =
nuclear@26: 	&cinfo->comp_info[scanptr->component_index[ci]];
nuclear@26:     }
nuclear@26:     cinfo->Ss = scanptr->Ss;
nuclear@26:     cinfo->Se = scanptr->Se;
nuclear@26:     cinfo->Ah = scanptr->Ah;
nuclear@26:     cinfo->Al = scanptr->Al;
nuclear@26:   }
nuclear@26:   else
nuclear@26: #endif
nuclear@26:   {
nuclear@26:     /* Prepare for single sequential-JPEG scan containing all components */
nuclear@26:     if (cinfo->num_components > MAX_COMPS_IN_SCAN)
nuclear@26:       ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
nuclear@26: 	       MAX_COMPS_IN_SCAN);
nuclear@26:     cinfo->comps_in_scan = cinfo->num_components;
nuclear@26:     for (ci = 0; ci < cinfo->num_components; ci++) {
nuclear@26:       cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
nuclear@26:     }
nuclear@26:     cinfo->Ss = 0;
nuclear@26:     cinfo->Se = DCTSIZE2-1;
nuclear@26:     cinfo->Ah = 0;
nuclear@26:     cinfo->Al = 0;
nuclear@26:   }
nuclear@26: }
nuclear@26: 
nuclear@26: 
nuclear@26: LOCAL(void)
nuclear@26: per_scan_setup (j_compress_ptr cinfo)
nuclear@26: /* Do computations that are needed before processing a JPEG scan */
nuclear@26: /* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */
nuclear@26: {
nuclear@26:   int ci, mcublks, tmp;
nuclear@26:   jpeg_component_info *compptr;
nuclear@26:   
nuclear@26:   if (cinfo->comps_in_scan == 1) {
nuclear@26:     
nuclear@26:     /* Noninterleaved (single-component) scan */
nuclear@26:     compptr = cinfo->cur_comp_info[0];
nuclear@26:     
nuclear@26:     /* Overall image size in MCUs */
nuclear@26:     cinfo->MCUs_per_row = compptr->width_in_blocks;
nuclear@26:     cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
nuclear@26:     
nuclear@26:     /* For noninterleaved scan, always one block per MCU */
nuclear@26:     compptr->MCU_width = 1;
nuclear@26:     compptr->MCU_height = 1;
nuclear@26:     compptr->MCU_blocks = 1;
nuclear@26:     compptr->MCU_sample_width = DCTSIZE;
nuclear@26:     compptr->last_col_width = 1;
nuclear@26:     /* For noninterleaved scans, it is convenient to define last_row_height
nuclear@26:      * as the number of block rows present in the last iMCU row.
nuclear@26:      */
nuclear@26:     tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
nuclear@26:     if (tmp == 0) tmp = compptr->v_samp_factor;
nuclear@26:     compptr->last_row_height = tmp;
nuclear@26:     
nuclear@26:     /* Prepare array describing MCU composition */
nuclear@26:     cinfo->blocks_in_MCU = 1;
nuclear@26:     cinfo->MCU_membership[0] = 0;
nuclear@26:     
nuclear@26:   } else {
nuclear@26:     
nuclear@26:     /* Interleaved (multi-component) scan */
nuclear@26:     if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
nuclear@26:       ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
nuclear@26: 	       MAX_COMPS_IN_SCAN);
nuclear@26:     
nuclear@26:     /* Overall image size in MCUs */
nuclear@26:     cinfo->MCUs_per_row = (JDIMENSION)
nuclear@26:       jdiv_round_up((long) cinfo->image_width,
nuclear@26: 		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
nuclear@26:     cinfo->MCU_rows_in_scan = (JDIMENSION)
nuclear@26:       jdiv_round_up((long) cinfo->image_height,
nuclear@26: 		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
nuclear@26:     
nuclear@26:     cinfo->blocks_in_MCU = 0;
nuclear@26:     
nuclear@26:     for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
nuclear@26:       compptr = cinfo->cur_comp_info[ci];
nuclear@26:       /* Sampling factors give # of blocks of component in each MCU */
nuclear@26:       compptr->MCU_width = compptr->h_samp_factor;
nuclear@26:       compptr->MCU_height = compptr->v_samp_factor;
nuclear@26:       compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
nuclear@26:       compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE;
nuclear@26:       /* Figure number of non-dummy blocks in last MCU column & row */
nuclear@26:       tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
nuclear@26:       if (tmp == 0) tmp = compptr->MCU_width;
nuclear@26:       compptr->last_col_width = tmp;
nuclear@26:       tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
nuclear@26:       if (tmp == 0) tmp = compptr->MCU_height;
nuclear@26:       compptr->last_row_height = tmp;
nuclear@26:       /* Prepare array describing MCU composition */
nuclear@26:       mcublks = compptr->MCU_blocks;
nuclear@26:       if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU)
nuclear@26: 	ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
nuclear@26:       while (mcublks-- > 0) {
nuclear@26: 	cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
nuclear@26:       }
nuclear@26:     }
nuclear@26:     
nuclear@26:   }
nuclear@26: 
nuclear@26:   /* Convert restart specified in rows to actual MCU count. */
nuclear@26:   /* Note that count must fit in 16 bits, so we provide limiting. */
nuclear@26:   if (cinfo->restart_in_rows > 0) {
nuclear@26:     long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row;
nuclear@26:     cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L);
nuclear@26:   }
nuclear@26: }
nuclear@26: 
nuclear@26: 
nuclear@26: /*
nuclear@26:  * Per-pass setup.
nuclear@26:  * This is called at the beginning of each pass.  We determine which modules
nuclear@26:  * will be active during this pass and give them appropriate start_pass calls.
nuclear@26:  * We also set is_last_pass to indicate whether any more passes will be
nuclear@26:  * required.
nuclear@26:  */
nuclear@26: 
nuclear@26: METHODDEF(void)
nuclear@26: prepare_for_pass (j_compress_ptr cinfo)
nuclear@26: {
nuclear@26:   my_master_ptr master = (my_master_ptr) cinfo->master;
nuclear@26: 
nuclear@26:   switch (master->pass_type) {
nuclear@26:   case main_pass:
nuclear@26:     /* Initial pass: will collect input data, and do either Huffman
nuclear@26:      * optimization or data output for the first scan.
nuclear@26:      */
nuclear@26:     select_scan_parameters(cinfo);
nuclear@26:     per_scan_setup(cinfo);
nuclear@26:     if (! cinfo->raw_data_in) {
nuclear@26:       (*cinfo->cconvert->start_pass) (cinfo);
nuclear@26:       (*cinfo->downsample->start_pass) (cinfo);
nuclear@26:       (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU);
nuclear@26:     }
nuclear@26:     (*cinfo->fdct->start_pass) (cinfo);
nuclear@26:     (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding);
nuclear@26:     (*cinfo->coef->start_pass) (cinfo,
nuclear@26: 				(master->total_passes > 1 ?
nuclear@26: 				 JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
nuclear@26:     (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
nuclear@26:     if (cinfo->optimize_coding) {
nuclear@26:       /* No immediate data output; postpone writing frame/scan headers */
nuclear@26:       master->pub.call_pass_startup = FALSE;
nuclear@26:     } else {
nuclear@26:       /* Will write frame/scan headers at first jpeg_write_scanlines call */
nuclear@26:       master->pub.call_pass_startup = TRUE;
nuclear@26:     }
nuclear@26:     break;
nuclear@26: #ifdef ENTROPY_OPT_SUPPORTED
nuclear@26:   case huff_opt_pass:
nuclear@26:     /* Do Huffman optimization for a scan after the first one. */
nuclear@26:     select_scan_parameters(cinfo);
nuclear@26:     per_scan_setup(cinfo);
nuclear@26:     if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) {
nuclear@26:       (*cinfo->entropy->start_pass) (cinfo, TRUE);
nuclear@26:       (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
nuclear@26:       master->pub.call_pass_startup = FALSE;
nuclear@26:       break;
nuclear@26:     }
nuclear@26:     /* Special case: Huffman DC refinement scans need no Huffman table
nuclear@26:      * and therefore we can skip the optimization pass for them.
nuclear@26:      */
nuclear@26:     master->pass_type = output_pass;
nuclear@26:     master->pass_number++;
nuclear@26:     /*FALLTHROUGH*/
nuclear@26: #endif
nuclear@26:   case output_pass:
nuclear@26:     /* Do a data-output pass. */
nuclear@26:     /* We need not repeat per-scan setup if prior optimization pass did it. */
nuclear@26:     if (! cinfo->optimize_coding) {
nuclear@26:       select_scan_parameters(cinfo);
nuclear@26:       per_scan_setup(cinfo);
nuclear@26:     }
nuclear@26:     (*cinfo->entropy->start_pass) (cinfo, FALSE);
nuclear@26:     (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
nuclear@26:     /* We emit frame/scan headers now */
nuclear@26:     if (master->scan_number == 0)
nuclear@26:       (*cinfo->marker->write_frame_header) (cinfo);
nuclear@26:     (*cinfo->marker->write_scan_header) (cinfo);
nuclear@26:     master->pub.call_pass_startup = FALSE;
nuclear@26:     break;
nuclear@26:   default:
nuclear@26:     ERREXIT(cinfo, JERR_NOT_COMPILED);
nuclear@26:   }
nuclear@26: 
nuclear@26:   master->pub.is_last_pass = (master->pass_number == master->total_passes-1);
nuclear@26: 
nuclear@26:   /* Set up progress monitor's pass info if present */
nuclear@26:   if (cinfo->progress != NULL) {
nuclear@26:     cinfo->progress->completed_passes = master->pass_number;
nuclear@26:     cinfo->progress->total_passes = master->total_passes;
nuclear@26:   }
nuclear@26: }
nuclear@26: 
nuclear@26: 
nuclear@26: /*
nuclear@26:  * Special start-of-pass hook.
nuclear@26:  * This is called by jpeg_write_scanlines if call_pass_startup is TRUE.
nuclear@26:  * In single-pass processing, we need this hook because we don't want to
nuclear@26:  * write frame/scan headers during jpeg_start_compress; we want to let the
nuclear@26:  * application write COM markers etc. between jpeg_start_compress and the
nuclear@26:  * jpeg_write_scanlines loop.
nuclear@26:  * In multi-pass processing, this routine is not used.
nuclear@26:  */
nuclear@26: 
nuclear@26: METHODDEF(void)
nuclear@26: pass_startup (j_compress_ptr cinfo)
nuclear@26: {
nuclear@26:   cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */
nuclear@26: 
nuclear@26:   (*cinfo->marker->write_frame_header) (cinfo);
nuclear@26:   (*cinfo->marker->write_scan_header) (cinfo);
nuclear@26: }
nuclear@26: 
nuclear@26: 
nuclear@26: /*
nuclear@26:  * Finish up at end of pass.
nuclear@26:  */
nuclear@26: 
nuclear@26: METHODDEF(void)
nuclear@26: finish_pass_master (j_compress_ptr cinfo)
nuclear@26: {
nuclear@26:   my_master_ptr master = (my_master_ptr) cinfo->master;
nuclear@26: 
nuclear@26:   /* The entropy coder always needs an end-of-pass call,
nuclear@26:    * either to analyze statistics or to flush its output buffer.
nuclear@26:    */
nuclear@26:   (*cinfo->entropy->finish_pass) (cinfo);
nuclear@26: 
nuclear@26:   /* Update state for next pass */
nuclear@26:   switch (master->pass_type) {
nuclear@26:   case main_pass:
nuclear@26:     /* next pass is either output of scan 0 (after optimization)
nuclear@26:      * or output of scan 1 (if no optimization).
nuclear@26:      */
nuclear@26:     master->pass_type = output_pass;
nuclear@26:     if (! cinfo->optimize_coding)
nuclear@26:       master->scan_number++;
nuclear@26:     break;
nuclear@26:   case huff_opt_pass:
nuclear@26:     /* next pass is always output of current scan */
nuclear@26:     master->pass_type = output_pass;
nuclear@26:     break;
nuclear@26:   case output_pass:
nuclear@26:     /* next pass is either optimization or output of next scan */
nuclear@26:     if (cinfo->optimize_coding)
nuclear@26:       master->pass_type = huff_opt_pass;
nuclear@26:     master->scan_number++;
nuclear@26:     break;
nuclear@26:   }
nuclear@26: 
nuclear@26:   master->pass_number++;
nuclear@26: }
nuclear@26: 
nuclear@26: 
nuclear@26: /*
nuclear@26:  * Initialize master compression control.
nuclear@26:  */
nuclear@26: 
nuclear@26: GLOBAL(void)
nuclear@26: jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
nuclear@26: {
nuclear@26:   my_master_ptr master;
nuclear@26: 
nuclear@26:   master = (my_master_ptr)
nuclear@26:       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
nuclear@26: 				  SIZEOF(my_comp_master));
nuclear@26:   cinfo->master = (struct jpeg_comp_master *) master;
nuclear@26:   master->pub.prepare_for_pass = prepare_for_pass;
nuclear@26:   master->pub.pass_startup = pass_startup;
nuclear@26:   master->pub.finish_pass = finish_pass_master;
nuclear@26:   master->pub.is_last_pass = FALSE;
nuclear@26: 
nuclear@26:   /* Validate parameters, determine derived values */
nuclear@26:   initial_setup(cinfo);
nuclear@26: 
nuclear@26:   if (cinfo->scan_info != NULL) {
nuclear@26: #ifdef C_MULTISCAN_FILES_SUPPORTED
nuclear@26:     validate_script(cinfo);
nuclear@26: #else
nuclear@26:     ERREXIT(cinfo, JERR_NOT_COMPILED);
nuclear@26: #endif
nuclear@26:   } else {
nuclear@26:     cinfo->progressive_mode = FALSE;
nuclear@26:     cinfo->num_scans = 1;
nuclear@26:   }
nuclear@26: 
nuclear@26:   if (cinfo->progressive_mode)	/*  TEMPORARY HACK ??? */
nuclear@26:     cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */
nuclear@26: 
nuclear@26:   /* Initialize my private state */
nuclear@26:   if (transcode_only) {
nuclear@26:     /* no main pass in transcoding */
nuclear@26:     if (cinfo->optimize_coding)
nuclear@26:       master->pass_type = huff_opt_pass;
nuclear@26:     else
nuclear@26:       master->pass_type = output_pass;
nuclear@26:   } else {
nuclear@26:     /* for normal compression, first pass is always this type: */
nuclear@26:     master->pass_type = main_pass;
nuclear@26:   }
nuclear@26:   master->scan_number = 0;
nuclear@26:   master->pass_number = 0;
nuclear@26:   if (cinfo->optimize_coding)
nuclear@26:     master->total_passes = cinfo->num_scans * 2;
nuclear@26:   else
nuclear@26:     master->total_passes = cinfo->num_scans;
nuclear@26: }