dbf-halloween2015: libs/zlib/zlib.h annotate

dbf-halloween2015

annotate libs/zlib/zlib.h @ 4:4316c0c879e9

fixed RUN script for macosx

author	John Tsiombikas <nuclear@member.fsf.org>
date	Sun, 01 Nov 2015 06:18:18 +0200
parents
children

rev	line source
nuclear@1	1 /* zlib.h -- interface of the 'zlib' general purpose compression library
nuclear@1	2 version 1.2.3, July 18th, 2005
nuclear@1	3
nuclear@1	4 Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
nuclear@1	5
nuclear@1	6 This software is provided 'as-is', without any express or implied
nuclear@1	7 warranty. In no event will the authors be held liable for any damages
nuclear@1	8 arising from the use of this software.
nuclear@1	9
nuclear@1	10 Permission is granted to anyone to use this software for any purpose,
nuclear@1	11 including commercial applications, and to alter it and redistribute it
nuclear@1	12 freely, subject to the following restrictions:
nuclear@1	13
nuclear@1	14 1. The origin of this software must not be misrepresented; you must not
nuclear@1	15 claim that you wrote the original software. If you use this software
nuclear@1	16 in a product, an acknowledgment in the product documentation would be
nuclear@1	17 appreciated but is not required.
nuclear@1	18 2. Altered source versions must be plainly marked as such, and must not be
nuclear@1	19 misrepresented as being the original software.
nuclear@1	20 3. This notice may not be removed or altered from any source distribution.
nuclear@1	21
nuclear@1	22 Jean-loup Gailly Mark Adler
nuclear@1	23 jloup@gzip.org madler@alumni.caltech.edu
nuclear@1	24
nuclear@1	25
nuclear@1	26 The data format used by the zlib library is described by RFCs (Request for
nuclear@1	27 Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
nuclear@1	28 (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
nuclear@1	29 */
nuclear@1	30
nuclear@1	31 #ifndef ZLIB_H
nuclear@1	32 #define ZLIB_H
nuclear@1	33
nuclear@1	34 #include "zconf.h"
nuclear@1	35
nuclear@1	36 #ifdef __cplusplus
nuclear@1	37 extern "C" {
nuclear@1	38 #endif
nuclear@1	39
nuclear@1	40 #define ZLIB_VERSION "1.2.3"
nuclear@1	41 #define ZLIB_VERNUM 0x1230
nuclear@1	42
nuclear@1	43 /*
nuclear@1	44 The 'zlib' compression library provides in-memory compression and
nuclear@1	45 decompression functions, including integrity checks of the uncompressed
nuclear@1	46 data. This version of the library supports only one compression method
nuclear@1	47 (deflation) but other algorithms will be added later and will have the same
nuclear@1	48 stream interface.
nuclear@1	49
nuclear@1	50 Compression can be done in a single step if the buffers are large
nuclear@1	51 enough (for example if an input file is mmap'ed), or can be done by
nuclear@1	52 repeated calls of the compression function. In the latter case, the
nuclear@1	53 application must provide more input and/or consume the output
nuclear@1	54 (providing more output space) before each call.
nuclear@1	55
nuclear@1	56 The compressed data format used by default by the in-memory functions is
nuclear@1	57 the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
nuclear@1	58 around a deflate stream, which is itself documented in RFC 1951.
nuclear@1	59
nuclear@1	60 The library also supports reading and writing files in gzip (.gz) format
nuclear@1	61 with an interface similar to that of stdio using the functions that start
nuclear@1	62 with "gz". The gzip format is different from the zlib format. gzip is a
nuclear@1	63 gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
nuclear@1	64
nuclear@1	65 This library can optionally read and write gzip streams in memory as well.
nuclear@1	66
nuclear@1	67 The zlib format was designed to be compact and fast for use in memory
nuclear@1	68 and on communications channels. The gzip format was designed for single-
nuclear@1	69 file compression on file systems, has a larger header than zlib to maintain
nuclear@1	70 directory information, and uses a different, slower check method than zlib.
nuclear@1	71
nuclear@1	72 The library does not install any signal handler. The decoder checks
nuclear@1	73 the consistency of the compressed data, so the library should never
nuclear@1	74 crash even in case of corrupted input.
nuclear@1	75 */
nuclear@1	76
nuclear@1	77 typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
nuclear@1	78 typedef void (*free_func) OF((voidpf opaque, voidpf address));
nuclear@1	79
nuclear@1	80 struct internal_state;
nuclear@1	81
nuclear@1	82 typedef struct z_stream_s {
nuclear@1	83 Bytef next_in; / next input byte */
nuclear@1	84 uInt avail_in; /* number of bytes available at next_in */
nuclear@1	85 uLong total_in; /* total nb of input bytes read so far */
nuclear@1	86
nuclear@1	87 Bytef next_out; / next output byte should be put there */
nuclear@1	88 uInt avail_out; /* remaining free space at next_out */
nuclear@1	89 uLong total_out; /* total nb of bytes output so far */
nuclear@1	90
nuclear@1	91 char msg; / last error message, NULL if no error */
nuclear@1	92 struct internal_state FAR state; / not visible by applications */
nuclear@1	93
nuclear@1	94 alloc_func zalloc; /* used to allocate the internal state */
nuclear@1	95 free_func zfree; /* used to free the internal state */
nuclear@1	96 voidpf opaque; /* private data object passed to zalloc and zfree */
nuclear@1	97
nuclear@1	98 int data_type; /* best guess about the data type: binary or text */
nuclear@1	99 uLong adler; /* adler32 value of the uncompressed data */
nuclear@1	100 uLong reserved; /* reserved for future use */
nuclear@1	101 } z_stream;
nuclear@1	102
nuclear@1	103 typedef z_stream FAR *z_streamp;
nuclear@1	104
nuclear@1	105 /*
nuclear@1	106 gzip header information passed to and from zlib routines. See RFC 1952
nuclear@1	107 for more details on the meanings of these fields.
nuclear@1	108 */
nuclear@1	109 typedef struct gz_header_s {
nuclear@1	110 int text; /* true if compressed data believed to be text */
nuclear@1	111 uLong time; /* modification time */
nuclear@1	112 int xflags; /* extra flags (not used when writing a gzip file) */
nuclear@1	113 int os; /* operating system */
nuclear@1	114 Bytef extra; / pointer to extra field or Z_NULL if none */
nuclear@1	115 uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
nuclear@1	116 uInt extra_max; /* space at extra (only when reading header) */
nuclear@1	117 Bytef name; / pointer to zero-terminated file name or Z_NULL */
nuclear@1	118 uInt name_max; /* space at name (only when reading header) */
nuclear@1	119 Bytef comment; / pointer to zero-terminated comment or Z_NULL */
nuclear@1	120 uInt comm_max; /* space at comment (only when reading header) */
nuclear@1	121 int hcrc; /* true if there was or will be a header crc */
nuclear@1	122 int done; /* true when done reading gzip header (not used
nuclear@1	123 when writing a gzip file) */
nuclear@1	124 } gz_header;
nuclear@1	125
nuclear@1	126 typedef gz_header FAR *gz_headerp;
nuclear@1	127
nuclear@1	128 /*
nuclear@1	129 The application must update next_in and avail_in when avail_in has
nuclear@1	130 dropped to zero. It must update next_out and avail_out when avail_out
nuclear@1	131 has dropped to zero. The application must initialize zalloc, zfree and
nuclear@1	132 opaque before calling the init function. All other fields are set by the
nuclear@1	133 compression library and must not be updated by the application.
nuclear@1	134
nuclear@1	135 The opaque value provided by the application will be passed as the first
nuclear@1	136 parameter for calls of zalloc and zfree. This can be useful for custom
nuclear@1	137 memory management. The compression library attaches no meaning to the
nuclear@1	138 opaque value.
nuclear@1	139
nuclear@1	140 zalloc must return Z_NULL if there is not enough memory for the object.
nuclear@1	141 If zlib is used in a multi-threaded application, zalloc and zfree must be
nuclear@1	142 thread safe.
nuclear@1	143
nuclear@1	144 On 16-bit systems, the functions zalloc and zfree must be able to allocate
nuclear@1	145 exactly 65536 bytes, but will not be required to allocate more than this
nuclear@1	146 if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
nuclear@1	147 pointers returned by zalloc for objects of exactly 65536 bytes must
nuclear@1	148 have their offset normalized to zero. The default allocation function
nuclear@1	149 provided by this library ensures this (see zutil.c). To reduce memory
nuclear@1	150 requirements and avoid any allocation of 64K objects, at the expense of
nuclear@1	151 compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
nuclear@1	152
nuclear@1	153 The fields total_in and total_out can be used for statistics or
nuclear@1	154 progress reports. After compression, total_in holds the total size of
nuclear@1	155 the uncompressed data and may be saved for use in the decompressor
nuclear@1	156 (particularly if the decompressor wants to decompress everything in
nuclear@1	157 a single step).
nuclear@1	158 */
nuclear@1	159
nuclear@1	160 /* constants */
nuclear@1	161
nuclear@1	162 #define Z_NO_FLUSH 0
nuclear@1	163 #define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
nuclear@1	164 #define Z_SYNC_FLUSH 2
nuclear@1	165 #define Z_FULL_FLUSH 3
nuclear@1	166 #define Z_FINISH 4
nuclear@1	167 #define Z_BLOCK 5
nuclear@1	168 /* Allowed flush values; see deflate() and inflate() below for details */
nuclear@1	169
nuclear@1	170 #define Z_OK 0
nuclear@1	171 #define Z_STREAM_END 1
nuclear@1	172 #define Z_NEED_DICT 2
nuclear@1	173 #define Z_ERRNO (-1)
nuclear@1	174 #define Z_STREAM_ERROR (-2)
nuclear@1	175 #define Z_DATA_ERROR (-3)
nuclear@1	176 #define Z_MEM_ERROR (-4)
nuclear@1	177 #define Z_BUF_ERROR (-5)
nuclear@1	178 #define Z_VERSION_ERROR (-6)
nuclear@1	179 /* Return codes for the compression/decompression functions. Negative
nuclear@1	180 * values are errors, positive values are used for special but normal events.
nuclear@1	181 */
nuclear@1	182
nuclear@1	183 #define Z_NO_COMPRESSION 0
nuclear@1	184 #define Z_BEST_SPEED 1
nuclear@1	185 #define Z_BEST_COMPRESSION 9
nuclear@1	186 #define Z_DEFAULT_COMPRESSION (-1)
nuclear@1	187 /* compression levels */
nuclear@1	188
nuclear@1	189 #define Z_FILTERED 1
nuclear@1	190 #define Z_HUFFMAN_ONLY 2
nuclear@1	191 #define Z_RLE 3
nuclear@1	192 #define Z_FIXED 4
nuclear@1	193 #define Z_DEFAULT_STRATEGY 0
nuclear@1	194 /* compression strategy; see deflateInit2() below for details */
nuclear@1	195
nuclear@1	196 #define Z_BINARY 0
nuclear@1	197 #define Z_TEXT 1
nuclear@1	198 #define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
nuclear@1	199 #define Z_UNKNOWN 2
nuclear@1	200 /* Possible values of the data_type field (though see inflate()) */
nuclear@1	201
nuclear@1	202 #define Z_DEFLATED 8
nuclear@1	203 /* The deflate compression method (the only one supported in this version) */
nuclear@1	204
nuclear@1	205 #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
nuclear@1	206
nuclear@1	207 #define zlib_version zlibVersion()
nuclear@1	208 /* for compatibility with versions < 1.0.2 */
nuclear@1	209
nuclear@1	210 /* basic functions */
nuclear@1	211
nuclear@1	212 ZEXTERN const char * ZEXPORT zlibVersion OF((void));
nuclear@1	213 /* The application can compare zlibVersion and ZLIB_VERSION for consistency.
nuclear@1	214 If the first character differs, the library code actually used is
nuclear@1	215 not compatible with the zlib.h header file used by the application.
nuclear@1	216 This check is automatically made by deflateInit and inflateInit.
nuclear@1	217 */
nuclear@1	218
nuclear@1	219 /*
nuclear@1	220 ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
nuclear@1	221
nuclear@1	222 Initializes the internal stream state for compression. The fields
nuclear@1	223 zalloc, zfree and opaque must be initialized before by the caller.
nuclear@1	224 If zalloc and zfree are set to Z_NULL, deflateInit updates them to
nuclear@1	225 use default allocation functions.
nuclear@1	226
nuclear@1	227 The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
nuclear@1	228 1 gives best speed, 9 gives best compression, 0 gives no compression at
nuclear@1	229 all (the input data is simply copied a block at a time).
nuclear@1	230 Z_DEFAULT_COMPRESSION requests a default compromise between speed and
nuclear@1	231 compression (currently equivalent to level 6).
nuclear@1	232
nuclear@1	233 deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
nuclear@1	234 enough memory, Z_STREAM_ERROR if level is not a valid compression level,
nuclear@1	235 Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
nuclear@1	236 with the version assumed by the caller (ZLIB_VERSION).
nuclear@1	237 msg is set to null if there is no error message. deflateInit does not
nuclear@1	238 perform any compression: this will be done by deflate().
nuclear@1	239 */
nuclear@1	240
nuclear@1	241
nuclear@1	242 ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
nuclear@1	243 /*
nuclear@1	244 deflate compresses as much data as possible, and stops when the input
nuclear@1	245 buffer becomes empty or the output buffer becomes full. It may introduce some
nuclear@1	246 output latency (reading input without producing any output) except when
nuclear@1	247 forced to flush.
nuclear@1	248
nuclear@1	249 The detailed semantics are as follows. deflate performs one or both of the
nuclear@1	250 following actions:
nuclear@1	251
nuclear@1	252 - Compress more input starting at next_in and update next_in and avail_in
nuclear@1	253 accordingly. If not all input can be processed (because there is not
nuclear@1	254 enough room in the output buffer), next_in and avail_in are updated and
nuclear@1	255 processing will resume at this point for the next call of deflate().
nuclear@1	256
nuclear@1	257 - Provide more output starting at next_out and update next_out and avail_out
nuclear@1	258 accordingly. This action is forced if the parameter flush is non zero.
nuclear@1	259 Forcing flush frequently degrades the compression ratio, so this parameter
nuclear@1	260 should be set only when necessary (in interactive applications).
nuclear@1	261 Some output may be provided even if flush is not set.
nuclear@1	262
nuclear@1	263 Before the call of deflate(), the application should ensure that at least
nuclear@1	264 one of the actions is possible, by providing more input and/or consuming
nuclear@1	265 more output, and updating avail_in or avail_out accordingly; avail_out
nuclear@1	266 should never be zero before the call. The application can consume the
nuclear@1	267 compressed output when it wants, for example when the output buffer is full
nuclear@1	268 (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
nuclear@1	269 and with zero avail_out, it must be called again after making room in the
nuclear@1	270 output buffer because there might be more output pending.
nuclear@1	271
nuclear@1	272 Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
nuclear@1	273 decide how much data to accumualte before producing output, in order to
nuclear@1	274 maximize compression.
nuclear@1	275
nuclear@1	276 If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
nuclear@1	277 flushed to the output buffer and the output is aligned on a byte boundary, so
nuclear@1	278 that the decompressor can get all input data available so far. (In particular
nuclear@1	279 avail_in is zero after the call if enough output space has been provided
nuclear@1	280 before the call.) Flushing may degrade compression for some compression
nuclear@1	281 algorithms and so it should be used only when necessary.
nuclear@1	282
nuclear@1	283 If flush is set to Z_FULL_FLUSH, all output is flushed as with
nuclear@1	284 Z_SYNC_FLUSH, and the compression state is reset so that decompression can
nuclear@1	285 restart from this point if previous compressed data has been damaged or if
nuclear@1	286 random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
nuclear@1	287 compression.
nuclear@1	288
nuclear@1	289 If deflate returns with avail_out == 0, this function must be called again
nuclear@1	290 with the same value of the flush parameter and more output space (updated
nuclear@1	291 avail_out), until the flush is complete (deflate returns with non-zero
nuclear@1	292 avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
nuclear@1	293 avail_out is greater than six to avoid repeated flush markers due to
nuclear@1	294 avail_out == 0 on return.
nuclear@1	295
nuclear@1	296 If the parameter flush is set to Z_FINISH, pending input is processed,
nuclear@1	297 pending output is flushed and deflate returns with Z_STREAM_END if there
nuclear@1	298 was enough output space; if deflate returns with Z_OK, this function must be
nuclear@1	299 called again with Z_FINISH and more output space (updated avail_out) but no
nuclear@1	300 more input data, until it returns with Z_STREAM_END or an error. After
nuclear@1	301 deflate has returned Z_STREAM_END, the only possible operations on the
nuclear@1	302 stream are deflateReset or deflateEnd.
nuclear@1	303
nuclear@1	304 Z_FINISH can be used immediately after deflateInit if all the compression
nuclear@1	305 is to be done in a single step. In this case, avail_out must be at least
nuclear@1	306 the value returned by deflateBound (see below). If deflate does not return
nuclear@1	307 Z_STREAM_END, then it must be called again as described above.
nuclear@1	308
nuclear@1	309 deflate() sets strm->adler to the adler32 checksum of all input read
nuclear@1	310 so far (that is, total_in bytes).
nuclear@1	311
nuclear@1	312 deflate() may update strm->data_type if it can make a good guess about
nuclear@1	313 the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
nuclear@1	314 binary. This field is only for information purposes and does not affect
nuclear@1	315 the compression algorithm in any manner.
nuclear@1	316
nuclear@1	317 deflate() returns Z_OK if some progress has been made (more input
nuclear@1	318 processed or more output produced), Z_STREAM_END if all input has been
nuclear@1	319 consumed and all output has been produced (only when flush is set to
nuclear@1	320 Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
nuclear@1	321 if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
nuclear@1	322 (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
nuclear@1	323 fatal, and deflate() can be called again with more input and more output
nuclear@1	324 space to continue compressing.
nuclear@1	325 */
nuclear@1	326
nuclear@1	327
nuclear@1	328 ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
nuclear@1	329 /*
nuclear@1	330 All dynamically allocated data structures for this stream are freed.
nuclear@1	331 This function discards any unprocessed input and does not flush any
nuclear@1	332 pending output.
nuclear@1	333
nuclear@1	334 deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
nuclear@1	335 stream state was inconsistent, Z_DATA_ERROR if the stream was freed
nuclear@1	336 prematurely (some input or output was discarded). In the error case,
nuclear@1	337 msg may be set but then points to a static string (which must not be
nuclear@1	338 deallocated).
nuclear@1	339 */
nuclear@1	340
nuclear@1	341
nuclear@1	342 /*
nuclear@1	343 ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
nuclear@1	344
nuclear@1	345 Initializes the internal stream state for decompression. The fields
nuclear@1	346 next_in, avail_in, zalloc, zfree and opaque must be initialized before by
nuclear@1	347 the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
nuclear@1	348 value depends on the compression method), inflateInit determines the
nuclear@1	349 compression method from the zlib header and allocates all data structures
nuclear@1	350 accordingly; otherwise the allocation will be deferred to the first call of
nuclear@1	351 inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
nuclear@1	352 use default allocation functions.
nuclear@1	353
nuclear@1	354 inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
nuclear@1	355 memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
nuclear@1	356 version assumed by the caller. msg is set to null if there is no error
nuclear@1	357 message. inflateInit does not perform any decompression apart from reading
nuclear@1	358 the zlib header if present: this will be done by inflate(). (So next_in and
nuclear@1	359 avail_in may be modified, but next_out and avail_out are unchanged.)
nuclear@1	360 */
nuclear@1	361
nuclear@1	362
nuclear@1	363 ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
nuclear@1	364 /*
nuclear@1	365 inflate decompresses as much data as possible, and stops when the input
nuclear@1	366 buffer becomes empty or the output buffer becomes full. It may introduce
nuclear@1	367 some output latency (reading input without producing any output) except when
nuclear@1	368 forced to flush.
nuclear@1	369
nuclear@1	370 The detailed semantics are as follows. inflate performs one or both of the
nuclear@1	371 following actions:
nuclear@1	372
nuclear@1	373 - Decompress more input starting at next_in and update next_in and avail_in
nuclear@1	374 accordingly. If not all input can be processed (because there is not
nuclear@1	375 enough room in the output buffer), next_in is updated and processing
nuclear@1	376 will resume at this point for the next call of inflate().
nuclear@1	377
nuclear@1	378 - Provide more output starting at next_out and update next_out and avail_out
nuclear@1	379 accordingly. inflate() provides as much output as possible, until there
nuclear@1	380 is no more input data or no more space in the output buffer (see below
nuclear@1	381 about the flush parameter).
nuclear@1	382
nuclear@1	383 Before the call of inflate(), the application should ensure that at least
nuclear@1	384 one of the actions is possible, by providing more input and/or consuming
nuclear@1	385 more output, and updating the next_* and avail_* values accordingly.
nuclear@1	386 The application can consume the uncompressed output when it wants, for
nuclear@1	387 example when the output buffer is full (avail_out == 0), or after each
nuclear@1	388 call of inflate(). If inflate returns Z_OK and with zero avail_out, it
nuclear@1	389 must be called again after making room in the output buffer because there
nuclear@1	390 might be more output pending.
nuclear@1	391
nuclear@1	392 The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
nuclear@1	393 Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
nuclear@1	394 output as possible to the output buffer. Z_BLOCK requests that inflate() stop
nuclear@1	395 if and when it gets to the next deflate block boundary. When decoding the
nuclear@1	396 zlib or gzip format, this will cause inflate() to return immediately after
nuclear@1	397 the header and before the first block. When doing a raw inflate, inflate()
nuclear@1	398 will go ahead and process the first block, and will return when it gets to
nuclear@1	399 the end of that block, or when it runs out of data.
nuclear@1	400
nuclear@1	401 The Z_BLOCK option assists in appending to or combining deflate streams.
nuclear@1	402 Also to assist in this, on return inflate() will set strm->data_type to the
nuclear@1	403 number of unused bits in the last byte taken from strm->next_in, plus 64
nuclear@1	404 if inflate() is currently decoding the last block in the deflate stream,
nuclear@1	405 plus 128 if inflate() returned immediately after decoding an end-of-block
nuclear@1	406 code or decoding the complete header up to just before the first byte of the
nuclear@1	407 deflate stream. The end-of-block will not be indicated until all of the
nuclear@1	408 uncompressed data from that block has been written to strm->next_out. The
nuclear@1	409 number of unused bits may in general be greater than seven, except when
nuclear@1	410 bit 7 of data_type is set, in which case the number of unused bits will be
nuclear@1	411 less than eight.
nuclear@1	412
nuclear@1	413 inflate() should normally be called until it returns Z_STREAM_END or an
nuclear@1	414 error. However if all decompression is to be performed in a single step
nuclear@1	415 (a single call of inflate), the parameter flush should be set to
nuclear@1	416 Z_FINISH. In this case all pending input is processed and all pending
nuclear@1	417 output is flushed; avail_out must be large enough to hold all the
nuclear@1	418 uncompressed data. (The size of the uncompressed data may have been saved
nuclear@1	419 by the compressor for this purpose.) The next operation on this stream must
nuclear@1	420 be inflateEnd to deallocate the decompression state. The use of Z_FINISH
nuclear@1	421 is never required, but can be used to inform inflate that a faster approach
nuclear@1	422 may be used for the single inflate() call.
nuclear@1	423
nuclear@1	424 In this implementation, inflate() always flushes as much output as
nuclear@1	425 possible to the output buffer, and always uses the faster approach on the
nuclear@1	426 first call. So the only effect of the flush parameter in this implementation
nuclear@1	427 is on the return value of inflate(), as noted below, or when it returns early
nuclear@1	428 because Z_BLOCK is used.
nuclear@1	429
nuclear@1	430 If a preset dictionary is needed after this call (see inflateSetDictionary
nuclear@1	431 below), inflate sets strm->adler to the adler32 checksum of the dictionary
nuclear@1	432 chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
nuclear@1	433 strm->adler to the adler32 checksum of all output produced so far (that is,
nuclear@1	434 total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
nuclear@1	435 below. At the end of the stream, inflate() checks that its computed adler32
nuclear@1	436 checksum is equal to that saved by the compressor and returns Z_STREAM_END
nuclear@1	437 only if the checksum is correct.
nuclear@1	438
nuclear@1	439 inflate() will decompress and check either zlib-wrapped or gzip-wrapped
nuclear@1	440 deflate data. The header type is detected automatically. Any information
nuclear@1	441 contained in the gzip header is not retained, so applications that need that
nuclear@1	442 information should instead use raw inflate, see inflateInit2() below, or
nuclear@1	443 inflateBack() and perform their own processing of the gzip header and
nuclear@1	444 trailer.
nuclear@1	445
nuclear@1	446 inflate() returns Z_OK if some progress has been made (more input processed
nuclear@1	447 or more output produced), Z_STREAM_END if the end of the compressed data has
nuclear@1	448 been reached and all uncompressed output has been produced, Z_NEED_DICT if a
nuclear@1	449 preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
nuclear@1	450 corrupted (input stream not conforming to the zlib format or incorrect check
nuclear@1	451 value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
nuclear@1	452 if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
nuclear@1	453 Z_BUF_ERROR if no progress is possible or if there was not enough room in the
nuclear@1	454 output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
nuclear@1	455 inflate() can be called again with more input and more output space to
nuclear@1	456 continue decompressing. If Z_DATA_ERROR is returned, the application may then
nuclear@1	457 call inflateSync() to look for a good compression block if a partial recovery
nuclear@1	458 of the data is desired.
nuclear@1	459 */
nuclear@1	460
nuclear@1	461
nuclear@1	462 ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
nuclear@1	463 /*
nuclear@1	464 All dynamically allocated data structures for this stream are freed.
nuclear@1	465 This function discards any unprocessed input and does not flush any
nuclear@1	466 pending output.
nuclear@1	467
nuclear@1	468 inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
nuclear@1	469 was inconsistent. In the error case, msg may be set but then points to a
nuclear@1	470 static string (which must not be deallocated).
nuclear@1	471 */
nuclear@1	472
nuclear@1	473 /* Advanced functions */
nuclear@1	474
nuclear@1	475 /*
nuclear@1	476 The following functions are needed only in some special applications.
nuclear@1	477 */
nuclear@1	478
nuclear@1	479 /*
nuclear@1	480 ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
nuclear@1	481 int level,
nuclear@1	482 int method,
nuclear@1	483 int windowBits,
nuclear@1	484 int memLevel,
nuclear@1	485 int strategy));
nuclear@1	486
nuclear@1	487 This is another version of deflateInit with more compression options. The
nuclear@1	488 fields next_in, zalloc, zfree and opaque must be initialized before by
nuclear@1	489 the caller.
nuclear@1	490
nuclear@1	491 The method parameter is the compression method. It must be Z_DEFLATED in
nuclear@1	492 this version of the library.
nuclear@1	493
nuclear@1	494 The windowBits parameter is the base two logarithm of the window size
nuclear@1	495 (the size of the history buffer). It should be in the range 8..15 for this
nuclear@1	496 version of the library. Larger values of this parameter result in better
nuclear@1	497 compression at the expense of memory usage. The default value is 15 if
nuclear@1	498 deflateInit is used instead.
nuclear@1	499
nuclear@1	500 windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
nuclear@1	501 determines the window size. deflate() will then generate raw deflate data
nuclear@1	502 with no zlib header or trailer, and will not compute an adler32 check value.
nuclear@1	503
nuclear@1	504 windowBits can also be greater than 15 for optional gzip encoding. Add
nuclear@1	505 16 to windowBits to write a simple gzip header and trailer around the
nuclear@1	506 compressed data instead of a zlib wrapper. The gzip header will have no
nuclear@1	507 file name, no extra data, no comment, no modification time (set to zero),
nuclear@1	508 no header crc, and the operating system will be set to 255 (unknown). If a
nuclear@1	509 gzip stream is being written, strm->adler is a crc32 instead of an adler32.
nuclear@1	510
nuclear@1	511 The memLevel parameter specifies how much memory should be allocated
nuclear@1	512 for the internal compression state. memLevel=1 uses minimum memory but
nuclear@1	513 is slow and reduces compression ratio; memLevel=9 uses maximum memory
nuclear@1	514 for optimal speed. The default value is 8. See zconf.h for total memory
nuclear@1	515 usage as a function of windowBits and memLevel.
nuclear@1	516
nuclear@1	517 The strategy parameter is used to tune the compression algorithm. Use the
nuclear@1	518 value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
nuclear@1	519 filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
nuclear@1	520 string match), or Z_RLE to limit match distances to one (run-length
nuclear@1	521 encoding). Filtered data consists mostly of small values with a somewhat
nuclear@1	522 random distribution. In this case, the compression algorithm is tuned to
nuclear@1	523 compress them better. The effect of Z_FILTERED is to force more Huffman
nuclear@1	524 coding and less string matching; it is somewhat intermediate between
nuclear@1	525 Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as
nuclear@1	526 Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy
nuclear@1	527 parameter only affects the compression ratio but not the correctness of the
nuclear@1	528 compressed output even if it is not set appropriately. Z_FIXED prevents the
nuclear@1	529 use of dynamic Huffman codes, allowing for a simpler decoder for special
nuclear@1	530 applications.
nuclear@1	531
nuclear@1	532 deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
nuclear@1	533 memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
nuclear@1	534 method). msg is set to null if there is no error message. deflateInit2 does
nuclear@1	535 not perform any compression: this will be done by deflate().
nuclear@1	536 */
nuclear@1	537
nuclear@1	538 ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
nuclear@1	539 const Bytef *dictionary,
nuclear@1	540 uInt dictLength));
nuclear@1	541 /*
nuclear@1	542 Initializes the compression dictionary from the given byte sequence
nuclear@1	543 without producing any compressed output. This function must be called
nuclear@1	544 immediately after deflateInit, deflateInit2 or deflateReset, before any
nuclear@1	545 call of deflate. The compressor and decompressor must use exactly the same
nuclear@1	546 dictionary (see inflateSetDictionary).
nuclear@1	547
nuclear@1	548 The dictionary should consist of strings (byte sequences) that are likely
nuclear@1	549 to be encountered later in the data to be compressed, with the most commonly
nuclear@1	550 used strings preferably put towards the end of the dictionary. Using a
nuclear@1	551 dictionary is most useful when the data to be compressed is short and can be
nuclear@1	552 predicted with good accuracy; the data can then be compressed better than
nuclear@1	553 with the default empty dictionary.
nuclear@1	554
nuclear@1	555 Depending on the size of the compression data structures selected by
nuclear@1	556 deflateInit or deflateInit2, a part of the dictionary may in effect be
nuclear@1	557 discarded, for example if the dictionary is larger than the window size in
nuclear@1	558 deflate or deflate2. Thus the strings most likely to be useful should be
nuclear@1	559 put at the end of the dictionary, not at the front. In addition, the
nuclear@1	560 current implementation of deflate will use at most the window size minus
nuclear@1	561 262 bytes of the provided dictionary.
nuclear@1	562
nuclear@1	563 Upon return of this function, strm->adler is set to the adler32 value
nuclear@1	564 of the dictionary; the decompressor may later use this value to determine
nuclear@1	565 which dictionary has been used by the compressor. (The adler32 value
nuclear@1	566 applies to the whole dictionary even if only a subset of the dictionary is
nuclear@1	567 actually used by the compressor.) If a raw deflate was requested, then the
nuclear@1	568 adler32 value is not computed and strm->adler is not set.
nuclear@1	569
nuclear@1	570 deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
nuclear@1	571 parameter is invalid (such as NULL dictionary) or the stream state is
nuclear@1	572 inconsistent (for example if deflate has already been called for this stream
nuclear@1	573 or if the compression method is bsort). deflateSetDictionary does not
nuclear@1	574 perform any compression: this will be done by deflate().
nuclear@1	575 */
nuclear@1	576
nuclear@1	577 ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
nuclear@1	578 z_streamp source));
nuclear@1	579 /*
nuclear@1	580 Sets the destination stream as a complete copy of the source stream.
nuclear@1	581
nuclear@1	582 This function can be useful when several compression strategies will be
nuclear@1	583 tried, for example when there are several ways of pre-processing the input
nuclear@1	584 data with a filter. The streams that will be discarded should then be freed
nuclear@1	585 by calling deflateEnd. Note that deflateCopy duplicates the internal
nuclear@1	586 compression state which can be quite large, so this strategy is slow and
nuclear@1	587 can consume lots of memory.
nuclear@1	588
nuclear@1	589 deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
nuclear@1	590 enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
nuclear@1	591 (such as zalloc being NULL). msg is left unchanged in both source and
nuclear@1	592 destination.
nuclear@1	593 */
nuclear@1	594
nuclear@1	595 ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
nuclear@1	596 /*
nuclear@1	597 This function is equivalent to deflateEnd followed by deflateInit,
nuclear@1	598 but does not free and reallocate all the internal compression state.
nuclear@1	599 The stream will keep the same compression level and any other attributes
nuclear@1	600 that may have been set by deflateInit2.
nuclear@1	601
nuclear@1	602 deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
nuclear@1	603 stream state was inconsistent (such as zalloc or state being NULL).
nuclear@1	604 */
nuclear@1	605
nuclear@1	606 ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
nuclear@1	607 int level,
nuclear@1	608 int strategy));
nuclear@1	609 /*
nuclear@1	610 Dynamically update the compression level and compression strategy. The
nuclear@1	611 interpretation of level and strategy is as in deflateInit2. This can be
nuclear@1	612 used to switch between compression and straight copy of the input data, or
nuclear@1	613 to switch to a different kind of input data requiring a different
nuclear@1	614 strategy. If the compression level is changed, the input available so far
nuclear@1	615 is compressed with the old level (and may be flushed); the new level will
nuclear@1	616 take effect only at the next call of deflate().
nuclear@1	617
nuclear@1	618 Before the call of deflateParams, the stream state must be set as for
nuclear@1	619 a call of deflate(), since the currently available input may have to
nuclear@1	620 be compressed and flushed. In particular, strm->avail_out must be non-zero.
nuclear@1	621
nuclear@1	622 deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
nuclear@1	623 stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
nuclear@1	624 if strm->avail_out was zero.
nuclear@1	625 */
nuclear@1	626
nuclear@1	627 ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
nuclear@1	628 int good_length,
nuclear@1	629 int max_lazy,
nuclear@1	630 int nice_length,
nuclear@1	631 int max_chain));
nuclear@1	632 /*
nuclear@1	633 Fine tune deflate's internal compression parameters. This should only be
nuclear@1	634 used by someone who understands the algorithm used by zlib's deflate for
nuclear@1	635 searching for the best matching string, and even then only by the most
nuclear@1	636 fanatic optimizer trying to squeeze out the last compressed bit for their
nuclear@1	637 specific input data. Read the deflate.c source code for the meaning of the
nuclear@1	638 max_lazy, good_length, nice_length, and max_chain parameters.
nuclear@1	639
nuclear@1	640 deflateTune() can be called after deflateInit() or deflateInit2(), and
nuclear@1	641 returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
nuclear@1	642 */
nuclear@1	643
nuclear@1	644 ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
nuclear@1	645 uLong sourceLen));
nuclear@1	646 /*
nuclear@1	647 deflateBound() returns an upper bound on the compressed size after
nuclear@1	648 deflation of sourceLen bytes. It must be called after deflateInit()
nuclear@1	649 or deflateInit2(). This would be used to allocate an output buffer
nuclear@1	650 for deflation in a single pass, and so would be called before deflate().
nuclear@1	651 */
nuclear@1	652
nuclear@1	653 ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
nuclear@1	654 int bits,
nuclear@1	655 int value));
nuclear@1	656 /*
nuclear@1	657 deflatePrime() inserts bits in the deflate output stream. The intent
nuclear@1	658 is that this function is used to start off the deflate output with the
nuclear@1	659 bits leftover from a previous deflate stream when appending to it. As such,
nuclear@1	660 this function can only be used for raw deflate, and must be used before the
nuclear@1	661 first deflate() call after a deflateInit2() or deflateReset(). bits must be
nuclear@1	662 less than or equal to 16, and that many of the least significant bits of
nuclear@1	663 value will be inserted in the output.
nuclear@1	664
nuclear@1	665 deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
nuclear@1	666 stream state was inconsistent.
nuclear@1	667 */
nuclear@1	668
nuclear@1	669 ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
nuclear@1	670 gz_headerp head));
nuclear@1	671 /*
nuclear@1	672 deflateSetHeader() provides gzip header information for when a gzip
nuclear@1	673 stream is requested by deflateInit2(). deflateSetHeader() may be called
nuclear@1	674 after deflateInit2() or deflateReset() and before the first call of
nuclear@1	675 deflate(). The text, time, os, extra field, name, and comment information
nuclear@1	676 in the provided gz_header structure are written to the gzip header (xflag is
nuclear@1	677 ignored -- the extra flags are set according to the compression level). The
nuclear@1	678 caller must assure that, if not Z_NULL, name and comment are terminated with
nuclear@1	679 a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
nuclear@1	680 available there. If hcrc is true, a gzip header crc is included. Note that
nuclear@1	681 the current versions of the command-line version of gzip (up through version
nuclear@1	682 1.3.x) do not support header crc's, and will report that it is a "multi-part
nuclear@1	683 gzip file" and give up.
nuclear@1	684
nuclear@1	685 If deflateSetHeader is not used, the default gzip header has text false,
nuclear@1	686 the time set to zero, and os set to 255, with no extra, name, or comment
nuclear@1	687 fields. The gzip header is returned to the default state by deflateReset().
nuclear@1	688
nuclear@1	689 deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
nuclear@1	690 stream state was inconsistent.
nuclear@1	691 */
nuclear@1	692
nuclear@1	693 /*
nuclear@1	694 ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
nuclear@1	695 int windowBits));
nuclear@1	696
nuclear@1	697 This is another version of inflateInit with an extra parameter. The
nuclear@1	698 fields next_in, avail_in, zalloc, zfree and opaque must be initialized
nuclear@1	699 before by the caller.
nuclear@1	700
nuclear@1	701 The windowBits parameter is the base two logarithm of the maximum window
nuclear@1	702 size (the size of the history buffer). It should be in the range 8..15 for
nuclear@1	703 this version of the library. The default value is 15 if inflateInit is used
nuclear@1	704 instead. windowBits must be greater than or equal to the windowBits value
nuclear@1	705 provided to deflateInit2() while compressing, or it must be equal to 15 if
nuclear@1	706 deflateInit2() was not used. If a compressed stream with a larger window
nuclear@1	707 size is given as input, inflate() will return with the error code
nuclear@1	708 Z_DATA_ERROR instead of trying to allocate a larger window.
nuclear@1	709
nuclear@1	710 windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
nuclear@1	711 determines the window size. inflate() will then process raw deflate data,
nuclear@1	712 not looking for a zlib or gzip header, not generating a check value, and not
nuclear@1	713 looking for any check values for comparison at the end of the stream. This
nuclear@1	714 is for use with other formats that use the deflate compressed data format
nuclear@1	715 such as zip. Those formats provide their own check values. If a custom
nuclear@1	716 format is developed using the raw deflate format for compressed data, it is
nuclear@1	717 recommended that a check value such as an adler32 or a crc32 be applied to
nuclear@1	718 the uncompressed data as is done in the zlib, gzip, and zip formats. For
nuclear@1	719 most applications, the zlib format should be used as is. Note that comments
nuclear@1	720 above on the use in deflateInit2() applies to the magnitude of windowBits.
nuclear@1	721
nuclear@1	722 windowBits can also be greater than 15 for optional gzip decoding. Add
nuclear@1	723 32 to windowBits to enable zlib and gzip decoding with automatic header
nuclear@1	724 detection, or add 16 to decode only the gzip format (the zlib format will
nuclear@1	725 return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is
nuclear@1	726 a crc32 instead of an adler32.
nuclear@1	727
nuclear@1	728 inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
nuclear@1	729 memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
nuclear@1	730 is set to null if there is no error message. inflateInit2 does not perform
nuclear@1	731 any decompression apart from reading the zlib header if present: this will
nuclear@1	732 be done by inflate(). (So next_in and avail_in may be modified, but next_out
nuclear@1	733 and avail_out are unchanged.)
nuclear@1	734 */
nuclear@1	735
nuclear@1	736 ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
nuclear@1	737 const Bytef *dictionary,
nuclear@1	738 uInt dictLength));
nuclear@1	739 /*
nuclear@1	740 Initializes the decompression dictionary from the given uncompressed byte
nuclear@1	741 sequence. This function must be called immediately after a call of inflate,
nuclear@1	742 if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
nuclear@1	743 can be determined from the adler32 value returned by that call of inflate.
nuclear@1	744 The compressor and decompressor must use exactly the same dictionary (see
nuclear@1	745 deflateSetDictionary). For raw inflate, this function can be called
nuclear@1	746 immediately after inflateInit2() or inflateReset() and before any call of
nuclear@1	747 inflate() to set the dictionary. The application must insure that the
nuclear@1	748 dictionary that was used for compression is provided.
nuclear@1	749
nuclear@1	750 inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
nuclear@1	751 parameter is invalid (such as NULL dictionary) or the stream state is
nuclear@1	752 inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
nuclear@1	753 expected one (incorrect adler32 value). inflateSetDictionary does not
nuclear@1	754 perform any decompression: this will be done by subsequent calls of
nuclear@1	755 inflate().
nuclear@1	756 */
nuclear@1	757
nuclear@1	758 ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
nuclear@1	759 /*
nuclear@1	760 Skips invalid compressed data until a full flush point (see above the
nuclear@1	761 description of deflate with Z_FULL_FLUSH) can be found, or until all
nuclear@1	762 available input is skipped. No output is provided.
nuclear@1	763
nuclear@1	764 inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
nuclear@1	765 if no more input was provided, Z_DATA_ERROR if no flush point has been found,
nuclear@1	766 or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
nuclear@1	767 case, the application may save the current current value of total_in which
nuclear@1	768 indicates where valid compressed data was found. In the error case, the
nuclear@1	769 application may repeatedly call inflateSync, providing more input each time,
nuclear@1	770 until success or end of the input data.
nuclear@1	771 */
nuclear@1	772
nuclear@1	773 ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
nuclear@1	774 z_streamp source));
nuclear@1	775 /*
nuclear@1	776 Sets the destination stream as a complete copy of the source stream.
nuclear@1	777
nuclear@1	778 This function can be useful when randomly accessing a large stream. The
nuclear@1	779 first pass through the stream can periodically record the inflate state,
nuclear@1	780 allowing restarting inflate at those points when randomly accessing the
nuclear@1	781 stream.
nuclear@1	782
nuclear@1	783 inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
nuclear@1	784 enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
nuclear@1	785 (such as zalloc being NULL). msg is left unchanged in both source and
nuclear@1	786 destination.
nuclear@1	787 */
nuclear@1	788
nuclear@1	789 ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
nuclear@1	790 /*
nuclear@1	791 This function is equivalent to inflateEnd followed by inflateInit,
nuclear@1	792 but does not free and reallocate all the internal decompression state.
nuclear@1	793 The stream will keep attributes that may have been set by inflateInit2.
nuclear@1	794
nuclear@1	795 inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
nuclear@1	796 stream state was inconsistent (such as zalloc or state being NULL).
nuclear@1	797 */
nuclear@1	798
nuclear@1	799 ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
nuclear@1	800 int bits,
nuclear@1	801 int value));
nuclear@1	802 /*
nuclear@1	803 This function inserts bits in the inflate input stream. The intent is
nuclear@1	804 that this function is used to start inflating at a bit position in the
nuclear@1	805 middle of a byte. The provided bits will be used before any bytes are used
nuclear@1	806 from next_in. This function should only be used with raw inflate, and
nuclear@1	807 should be used before the first inflate() call after inflateInit2() or
nuclear@1	808 inflateReset(). bits must be less than or equal to 16, and that many of the
nuclear@1	809 least significant bits of value will be inserted in the input.
nuclear@1	810
nuclear@1	811 inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
nuclear@1	812 stream state was inconsistent.
nuclear@1	813 */
nuclear@1	814
nuclear@1	815 ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
nuclear@1	816 gz_headerp head));
nuclear@1	817 /*
nuclear@1	818 inflateGetHeader() requests that gzip header information be stored in the
nuclear@1	819 provided gz_header structure. inflateGetHeader() may be called after
nuclear@1	820 inflateInit2() or inflateReset(), and before the first call of inflate().
nuclear@1	821 As inflate() processes the gzip stream, head->done is zero until the header
nuclear@1	822 is completed, at which time head->done is set to one. If a zlib stream is
nuclear@1	823 being decoded, then head->done is set to -1 to indicate that there will be
nuclear@1	824 no gzip header information forthcoming. Note that Z_BLOCK can be used to
nuclear@1	825 force inflate() to return immediately after header processing is complete
nuclear@1	826 and before any actual data is decompressed.
nuclear@1	827
nuclear@1	828 The text, time, xflags, and os fields are filled in with the gzip header
nuclear@1	829 contents. hcrc is set to true if there is a header CRC. (The header CRC
nuclear@1	830 was valid if done is set to one.) If extra is not Z_NULL, then extra_max
nuclear@1	831 contains the maximum number of bytes to write to extra. Once done is true,
nuclear@1	832 extra_len contains the actual extra field length, and extra contains the
nuclear@1	833 extra field, or that field truncated if extra_max is less than extra_len.
nuclear@1	834 If name is not Z_NULL, then up to name_max characters are written there,
nuclear@1	835 terminated with a zero unless the length is greater than name_max. If
nuclear@1	836 comment is not Z_NULL, then up to comm_max characters are written there,
nuclear@1	837 terminated with a zero unless the length is greater than comm_max. When
nuclear@1	838 any of extra, name, or comment are not Z_NULL and the respective field is
nuclear@1	839 not present in the header, then that field is set to Z_NULL to signal its
nuclear@1	840 absence. This allows the use of deflateSetHeader() with the returned
nuclear@1	841 structure to duplicate the header. However if those fields are set to
nuclear@1	842 allocated memory, then the application will need to save those pointers
nuclear@1	843 elsewhere so that they can be eventually freed.
nuclear@1	844
nuclear@1	845 If inflateGetHeader is not used, then the header information is simply
nuclear@1	846 discarded. The header is always checked for validity, including the header
nuclear@1	847 CRC if present. inflateReset() will reset the process to discard the header
nuclear@1	848 information. The application would need to call inflateGetHeader() again to
nuclear@1	849 retrieve the header from the next gzip stream.
nuclear@1	850
nuclear@1	851 inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
nuclear@1	852 stream state was inconsistent.
nuclear@1	853 */
nuclear@1	854
nuclear@1	855 /*
nuclear@1	856 ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
nuclear@1	857 unsigned char FAR *window));
nuclear@1	858
nuclear@1	859 Initialize the internal stream state for decompression using inflateBack()
nuclear@1	860 calls. The fields zalloc, zfree and opaque in strm must be initialized
nuclear@1	861 before the call. If zalloc and zfree are Z_NULL, then the default library-
nuclear@1	862 derived memory allocation routines are used. windowBits is the base two
nuclear@1	863 logarithm of the window size, in the range 8..15. window is a caller
nuclear@1	864 supplied buffer of that size. Except for special applications where it is
nuclear@1	865 assured that deflate was used with small window sizes, windowBits must be 15
nuclear@1	866 and a 32K byte window must be supplied to be able to decompress general
nuclear@1	867 deflate streams.
nuclear@1	868
nuclear@1	869 See inflateBack() for the usage of these routines.
nuclear@1	870
nuclear@1	871 inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
nuclear@1	872 the paramaters are invalid, Z_MEM_ERROR if the internal state could not
nuclear@1	873 be allocated, or Z_VERSION_ERROR if the version of the library does not
nuclear@1	874 match the version of the header file.
nuclear@1	875 */
nuclear@1	876
nuclear@1	877 typedef unsigned (in_func) OF((void FAR , unsigned char FAR * FAR *));
nuclear@1	878 typedef int (out_func) OF((void FAR , unsigned char FAR *, unsigned));
nuclear@1	879
nuclear@1	880 ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
nuclear@1	881 in_func in, void FAR *in_desc,
nuclear@1	882 out_func out, void FAR *out_desc));
nuclear@1	883 /*
nuclear@1	884 inflateBack() does a raw inflate with a single call using a call-back
nuclear@1	885 interface for input and output. This is more efficient than inflate() for
nuclear@1	886 file i/o applications in that it avoids copying between the output and the
nuclear@1	887 sliding window by simply making the window itself the output buffer. This
nuclear@1	888 function trusts the application to not change the output buffer passed by
nuclear@1	889 the output function, at least until inflateBack() returns.
nuclear@1	890
nuclear@1	891 inflateBackInit() must be called first to allocate the internal state
nuclear@1	892 and to initialize the state with the user-provided window buffer.
nuclear@1	893 inflateBack() may then be used multiple times to inflate a complete, raw
nuclear@1	894 deflate stream with each call. inflateBackEnd() is then called to free
nuclear@1	895 the allocated state.
nuclear@1	896
nuclear@1	897 A raw deflate stream is one with no zlib or gzip header or trailer.
nuclear@1	898 This routine would normally be used in a utility that reads zip or gzip
nuclear@1	899 files and writes out uncompressed files. The utility would decode the
nuclear@1	900 header and process the trailer on its own, hence this routine expects
nuclear@1	901 only the raw deflate stream to decompress. This is different from the
nuclear@1	902 normal behavior of inflate(), which expects either a zlib or gzip header and
nuclear@1	903 trailer around the deflate stream.
nuclear@1	904
nuclear@1	905 inflateBack() uses two subroutines supplied by the caller that are then
nuclear@1	906 called by inflateBack() for input and output. inflateBack() calls those
nuclear@1	907 routines until it reads a complete deflate stream and writes out all of the
nuclear@1	908 uncompressed data, or until it encounters an error. The function's
nuclear@1	909 parameters and return types are defined above in the in_func and out_func
nuclear@1	910 typedefs. inflateBack() will call in(in_desc, &buf) which should return the
nuclear@1	911 number of bytes of provided input, and a pointer to that input in buf. If
nuclear@1	912 there is no input available, in() must return zero--buf is ignored in that
nuclear@1	913 case--and inflateBack() will return a buffer error. inflateBack() will call
nuclear@1	914 out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
nuclear@1	915 should return zero on success, or non-zero on failure. If out() returns
nuclear@1	916 non-zero, inflateBack() will return with an error. Neither in() nor out()
nuclear@1	917 are permitted to change the contents of the window provided to
nuclear@1	918 inflateBackInit(), which is also the buffer that out() uses to write from.
nuclear@1	919 The length written by out() will be at most the window size. Any non-zero
nuclear@1	920 amount of input may be provided by in().
nuclear@1	921
nuclear@1	922 For convenience, inflateBack() can be provided input on the first call by
nuclear@1	923 setting strm->next_in and strm->avail_in. If that input is exhausted, then
nuclear@1	924 in() will be called. Therefore strm->next_in must be initialized before
nuclear@1	925 calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
nuclear@1	926 immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
nuclear@1	927 must also be initialized, and then if strm->avail_in is not zero, input will
nuclear@1	928 initially be taken from strm->next_in[0 .. strm->avail_in - 1].
nuclear@1	929
nuclear@1	930 The in_desc and out_desc parameters of inflateBack() is passed as the
nuclear@1	931 first parameter of in() and out() respectively when they are called. These
nuclear@1	932 descriptors can be optionally used to pass any information that the caller-
nuclear@1	933 supplied in() and out() functions need to do their job.
nuclear@1	934
nuclear@1	935 On return, inflateBack() will set strm->next_in and strm->avail_in to
nuclear@1	936 pass back any unused input that was provided by the last in() call. The
nuclear@1	937 return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
nuclear@1	938 if in() or out() returned an error, Z_DATA_ERROR if there was a format
nuclear@1	939 error in the deflate stream (in which case strm->msg is set to indicate the
nuclear@1	940 nature of the error), or Z_STREAM_ERROR if the stream was not properly
nuclear@1	941 initialized. In the case of Z_BUF_ERROR, an input or output error can be
nuclear@1	942 distinguished using strm->next_in which will be Z_NULL only if in() returned
nuclear@1	943 an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to
nuclear@1	944 out() returning non-zero. (in() will always be called before out(), so
nuclear@1	945 strm->next_in is assured to be defined if out() returns non-zero.) Note
nuclear@1	946 that inflateBack() cannot return Z_OK.
nuclear@1	947 */
nuclear@1	948
nuclear@1	949 ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
nuclear@1	950 /*
nuclear@1	951 All memory allocated by inflateBackInit() is freed.
nuclear@1	952
nuclear@1	953 inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
nuclear@1	954 state was inconsistent.
nuclear@1	955 */
nuclear@1	956
nuclear@1	957 ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
nuclear@1	958 /* Return flags indicating compile-time options.
nuclear@1	959
nuclear@1	960 Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
nuclear@1	961 1.0: size of uInt
nuclear@1	962 3.2: size of uLong
nuclear@1	963 5.4: size of voidpf (pointer)
nuclear@1	964 7.6: size of z_off_t
nuclear@1	965
nuclear@1	966 Compiler, assembler, and debug options:
nuclear@1	967 8: DEBUG
nuclear@1	968 9: ASMV or ASMINF -- use ASM code
nuclear@1	969 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
nuclear@1	970 11: 0 (reserved)
nuclear@1	971
nuclear@1	972 One-time table building (smaller code, but not thread-safe if true):
nuclear@1	973 12: BUILDFIXED -- build static block decoding tables when needed
nuclear@1	974 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
nuclear@1	975 14,15: 0 (reserved)
nuclear@1	976
nuclear@1	977 Library content (indicates missing functionality):
nuclear@1	978 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
nuclear@1	979 deflate code when not needed)
nuclear@1	980 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
nuclear@1	981 and decode gzip streams (to avoid linking crc code)
nuclear@1	982 18-19: 0 (reserved)
nuclear@1	983
nuclear@1	984 Operation variations (changes in library functionality):
nuclear@1	985 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
nuclear@1	986 21: FASTEST -- deflate algorithm with only one, lowest compression level
nuclear@1	987 22,23: 0 (reserved)
nuclear@1	988
nuclear@1	989 The sprintf variant used by gzprintf (zero is best):
nuclear@1	990 24: 0 = vs, 1 = s -- 1 means limited to 20 arguments after the format
nuclear@1	991 25: 0 = nprintf, 1 = printf -- 1 means gzprintf() not secure!
nuclear@1	992 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
nuclear@1	993
nuclear@1	994 Remainder:
nuclear@1	995 27-31: 0 (reserved)
nuclear@1	996 */
nuclear@1	997
nuclear@1	998
nuclear@1	999 /* utility functions */
nuclear@1	1000
nuclear@1	1001 /*
nuclear@1	1002 The following utility functions are implemented on top of the
nuclear@1	1003 basic stream-oriented functions. To simplify the interface, some
nuclear@1	1004 default options are assumed (compression level and memory usage,
nuclear@1	1005 standard memory allocation functions). The source code of these
nuclear@1	1006 utility functions can easily be modified if you need special options.
nuclear@1	1007 */
nuclear@1	1008
nuclear@1	1009 ZEXTERN int ZEXPORT compress OF((Bytef dest, uLongf destLen,
nuclear@1	1010 const Bytef *source, uLong sourceLen));
nuclear@1	1011 /*
nuclear@1	1012 Compresses the source buffer into the destination buffer. sourceLen is
nuclear@1	1013 the byte length of the source buffer. Upon entry, destLen is the total
nuclear@1	1014 size of the destination buffer, which must be at least the value returned
nuclear@1	1015 by compressBound(sourceLen). Upon exit, destLen is the actual size of the
nuclear@1	1016 compressed buffer.
nuclear@1	1017 This function can be used to compress a whole file at once if the
nuclear@1	1018 input file is mmap'ed.
nuclear@1	1019 compress returns Z_OK if success, Z_MEM_ERROR if there was not
nuclear@1	1020 enough memory, Z_BUF_ERROR if there was not enough room in the output
nuclear@1	1021 buffer.
nuclear@1	1022 */
nuclear@1	1023
nuclear@1	1024 ZEXTERN int ZEXPORT compress2 OF((Bytef dest, uLongf destLen,
nuclear@1	1025 const Bytef *source, uLong sourceLen,
nuclear@1	1026 int level));
nuclear@1	1027 /*
nuclear@1	1028 Compresses the source buffer into the destination buffer. The level
nuclear@1	1029 parameter has the same meaning as in deflateInit. sourceLen is the byte
nuclear@1	1030 length of the source buffer. Upon entry, destLen is the total size of the
nuclear@1	1031 destination buffer, which must be at least the value returned by
nuclear@1	1032 compressBound(sourceLen). Upon exit, destLen is the actual size of the
nuclear@1	1033 compressed buffer.
nuclear@1	1034
nuclear@1	1035 compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
nuclear@1	1036 memory, Z_BUF_ERROR if there was not enough room in the output buffer,
nuclear@1	1037 Z_STREAM_ERROR if the level parameter is invalid.
nuclear@1	1038 */
nuclear@1	1039
nuclear@1	1040 ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
nuclear@1	1041 /*
nuclear@1	1042 compressBound() returns an upper bound on the compressed size after
nuclear@1	1043 compress() or compress2() on sourceLen bytes. It would be used before
nuclear@1	1044 a compress() or compress2() call to allocate the destination buffer.
nuclear@1	1045 */
nuclear@1	1046
nuclear@1	1047 ZEXTERN int ZEXPORT uncompress OF((Bytef dest, uLongf destLen,
nuclear@1	1048 const Bytef *source, uLong sourceLen));
nuclear@1	1049 /*
nuclear@1	1050 Decompresses the source buffer into the destination buffer. sourceLen is
nuclear@1	1051 the byte length of the source buffer. Upon entry, destLen is the total
nuclear@1	1052 size of the destination buffer, which must be large enough to hold the
nuclear@1	1053 entire uncompressed data. (The size of the uncompressed data must have
nuclear@1	1054 been saved previously by the compressor and transmitted to the decompressor
nuclear@1	1055 by some mechanism outside the scope of this compression library.)
nuclear@1	1056 Upon exit, destLen is the actual size of the compressed buffer.
nuclear@1	1057 This function can be used to decompress a whole file at once if the
nuclear@1	1058 input file is mmap'ed.
nuclear@1	1059
nuclear@1	1060 uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
nuclear@1	1061 enough memory, Z_BUF_ERROR if there was not enough room in the output
nuclear@1	1062 buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
nuclear@1	1063 */
nuclear@1	1064
nuclear@1	1065
nuclear@1	1066 typedef voidp gzFile;
nuclear@1	1067
nuclear@1	1068 ZEXTERN gzFile ZEXPORT gzopen OF((const char path, const char mode));
nuclear@1	1069 /*
nuclear@1	1070 Opens a gzip (.gz) file for reading or writing. The mode parameter
nuclear@1	1071 is as in fopen ("rb" or "wb") but can also include a compression level
nuclear@1	1072 ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
nuclear@1	1073 Huffman only compression as in "wb1h", or 'R' for run-length encoding
nuclear@1	1074 as in "wb1R". (See the description of deflateInit2 for more information
nuclear@1	1075 about the strategy parameter.)
nuclear@1	1076
nuclear@1	1077 gzopen can be used to read a file which is not in gzip format; in this
nuclear@1	1078 case gzread will directly read from the file without decompression.
nuclear@1	1079
nuclear@1	1080 gzopen returns NULL if the file could not be opened or if there was
nuclear@1	1081 insufficient memory to allocate the (de)compression state; errno
nuclear@1	1082 can be checked to distinguish the two cases (if errno is zero, the
nuclear@1	1083 zlib error is Z_MEM_ERROR). */
nuclear@1	1084
nuclear@1	1085 ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
nuclear@1	1086 /*
nuclear@1	1087 gzdopen() associates a gzFile with the file descriptor fd. File
nuclear@1	1088 descriptors are obtained from calls like open, dup, creat, pipe or
nuclear@1	1089 fileno (in the file has been previously opened with fopen).
nuclear@1	1090 The mode parameter is as in gzopen.
nuclear@1	1091 The next call of gzclose on the returned gzFile will also close the
nuclear@1	1092 file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
nuclear@1	1093 descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
nuclear@1	1094 gzdopen returns NULL if there was insufficient memory to allocate
nuclear@1	1095 the (de)compression state.
nuclear@1	1096 */
nuclear@1	1097
nuclear@1	1098 ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
nuclear@1	1099 /*
nuclear@1	1100 Dynamically update the compression level or strategy. See the description
nuclear@1	1101 of deflateInit2 for the meaning of these parameters.
nuclear@1	1102 gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
nuclear@1	1103 opened for writing.
nuclear@1	1104 */
nuclear@1	1105
nuclear@1	1106 ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
nuclear@1	1107 /*
nuclear@1	1108 Reads the given number of uncompressed bytes from the compressed file.
nuclear@1	1109 If the input file was not in gzip format, gzread copies the given number
nuclear@1	1110 of bytes into the buffer.
nuclear@1	1111 gzread returns the number of uncompressed bytes actually read (0 for
nuclear@1	1112 end of file, -1 for error). */
nuclear@1	1113
nuclear@1	1114 ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
nuclear@1	1115 voidpc buf, unsigned len));
nuclear@1	1116 /*
nuclear@1	1117 Writes the given number of uncompressed bytes into the compressed file.
nuclear@1	1118 gzwrite returns the number of uncompressed bytes actually written
nuclear@1	1119 (0 in case of error).
nuclear@1	1120 */
nuclear@1	1121
nuclear@1	1122 ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
nuclear@1	1123 /*
nuclear@1	1124 Converts, formats, and writes the args to the compressed file under
nuclear@1	1125 control of the format string, as in fprintf. gzprintf returns the number of
nuclear@1	1126 uncompressed bytes actually written (0 in case of error). The number of
nuclear@1	1127 uncompressed bytes written is limited to 4095. The caller should assure that
nuclear@1	1128 this limit is not exceeded. If it is exceeded, then gzprintf() will return
nuclear@1	1129 return an error (0) with nothing written. In this case, there may also be a
nuclear@1	1130 buffer overflow with unpredictable consequences, which is possible only if
nuclear@1	1131 zlib was compiled with the insecure functions sprintf() or vsprintf()
nuclear@1	1132 because the secure snprintf() or vsnprintf() functions were not available.
nuclear@1	1133 */
nuclear@1	1134
nuclear@1	1135 ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
nuclear@1	1136 /*
nuclear@1	1137 Writes the given null-terminated string to the compressed file, excluding
nuclear@1	1138 the terminating null character.
nuclear@1	1139 gzputs returns the number of characters written, or -1 in case of error.
nuclear@1	1140 */
nuclear@1	1141
nuclear@1	1142 ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
nuclear@1	1143 /*
nuclear@1	1144 Reads bytes from the compressed file until len-1 characters are read, or
nuclear@1	1145 a newline character is read and transferred to buf, or an end-of-file
nuclear@1	1146 condition is encountered. The string is then terminated with a null
nuclear@1	1147 character.
nuclear@1	1148 gzgets returns buf, or Z_NULL in case of error.
nuclear@1	1149 */
nuclear@1	1150
nuclear@1	1151 ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
nuclear@1	1152 /*
nuclear@1	1153 Writes c, converted to an unsigned char, into the compressed file.
nuclear@1	1154 gzputc returns the value that was written, or -1 in case of error.
nuclear@1	1155 */
nuclear@1	1156
nuclear@1	1157 ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
nuclear@1	1158 /*
nuclear@1	1159 Reads one byte from the compressed file. gzgetc returns this byte
nuclear@1	1160 or -1 in case of end of file or error.
nuclear@1	1161 */
nuclear@1	1162
nuclear@1	1163 ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
nuclear@1	1164 /*
nuclear@1	1165 Push one character back onto the stream to be read again later.
nuclear@1	1166 Only one character of push-back is allowed. gzungetc() returns the
nuclear@1	1167 character pushed, or -1 on failure. gzungetc() will fail if a
nuclear@1	1168 character has been pushed but not read yet, or if c is -1. The pushed
nuclear@1	1169 character will be discarded if the stream is repositioned with gzseek()
nuclear@1	1170 or gzrewind().
nuclear@1	1171 */
nuclear@1	1172
nuclear@1	1173 ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
nuclear@1	1174 /*
nuclear@1	1175 Flushes all pending output into the compressed file. The parameter
nuclear@1	1176 flush is as in the deflate() function. The return value is the zlib
nuclear@1	1177 error number (see function gzerror below). gzflush returns Z_OK if
nuclear@1	1178 the flush parameter is Z_FINISH and all output could be flushed.
nuclear@1	1179 gzflush should be called only when strictly necessary because it can
nuclear@1	1180 degrade compression.
nuclear@1	1181 */
nuclear@1	1182
nuclear@1	1183 ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
nuclear@1	1184 z_off_t offset, int whence));
nuclear@1	1185 /*
nuclear@1	1186 Sets the starting position for the next gzread or gzwrite on the
nuclear@1	1187 given compressed file. The offset represents a number of bytes in the
nuclear@1	1188 uncompressed data stream. The whence parameter is defined as in lseek(2);
nuclear@1	1189 the value SEEK_END is not supported.
nuclear@1	1190 If the file is opened for reading, this function is emulated but can be
nuclear@1	1191 extremely slow. If the file is opened for writing, only forward seeks are
nuclear@1	1192 supported; gzseek then compresses a sequence of zeroes up to the new
nuclear@1	1193 starting position.
nuclear@1	1194
nuclear@1	1195 gzseek returns the resulting offset location as measured in bytes from
nuclear@1	1196 the beginning of the uncompressed stream, or -1 in case of error, in
nuclear@1	1197 particular if the file is opened for writing and the new starting position
nuclear@1	1198 would be before the current position.
nuclear@1	1199 */
nuclear@1	1200
nuclear@1	1201 ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
nuclear@1	1202 /*
nuclear@1	1203 Rewinds the given file. This function is supported only for reading.
nuclear@1	1204
nuclear@1	1205 gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
nuclear@1	1206 */
nuclear@1	1207
nuclear@1	1208 ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
nuclear@1	1209 /*
nuclear@1	1210 Returns the starting position for the next gzread or gzwrite on the
nuclear@1	1211 given compressed file. This position represents a number of bytes in the
nuclear@1	1212 uncompressed data stream.
nuclear@1	1213
nuclear@1	1214 gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
nuclear@1	1215 */
nuclear@1	1216
nuclear@1	1217 ZEXTERN int ZEXPORT gzeof OF((gzFile file));
nuclear@1	1218 /*
nuclear@1	1219 Returns 1 when EOF has previously been detected reading the given
nuclear@1	1220 input stream, otherwise zero.
nuclear@1	1221 */
nuclear@1	1222
nuclear@1	1223 ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
nuclear@1	1224 /*
nuclear@1	1225 Returns 1 if file is being read directly without decompression, otherwise
nuclear@1	1226 zero.
nuclear@1	1227 */
nuclear@1	1228
nuclear@1	1229 ZEXTERN int ZEXPORT gzclose OF((gzFile file));
nuclear@1	1230 /*
nuclear@1	1231 Flushes all pending output if necessary, closes the compressed file
nuclear@1	1232 and deallocates all the (de)compression state. The return value is the zlib
nuclear@1	1233 error number (see function gzerror below).
nuclear@1	1234 */
nuclear@1	1235
nuclear@1	1236 ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
nuclear@1	1237 /*
nuclear@1	1238 Returns the error message for the last error which occurred on the
nuclear@1	1239 given compressed file. errnum is set to zlib error number. If an
nuclear@1	1240 error occurred in the file system and not in the compression library,
nuclear@1	1241 errnum is set to Z_ERRNO and the application may consult errno
nuclear@1	1242 to get the exact error code.
nuclear@1	1243 */
nuclear@1	1244
nuclear@1	1245 ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
nuclear@1	1246 /*
nuclear@1	1247 Clears the error and end-of-file flags for file. This is analogous to the
nuclear@1	1248 clearerr() function in stdio. This is useful for continuing to read a gzip
nuclear@1	1249 file that is being written concurrently.
nuclear@1	1250 */
nuclear@1	1251
nuclear@1	1252 /* checksum functions */
nuclear@1	1253
nuclear@1	1254 /*
nuclear@1	1255 These functions are not related to compression but are exported
nuclear@1	1256 anyway because they might be useful in applications using the
nuclear@1	1257 compression library.
nuclear@1	1258 */
nuclear@1	1259
nuclear@1	1260 ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
nuclear@1	1261 /*
nuclear@1	1262 Update a running Adler-32 checksum with the bytes buf[0..len-1] and
nuclear@1	1263 return the updated checksum. If buf is NULL, this function returns
nuclear@1	1264 the required initial value for the checksum.
nuclear@1	1265 An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
nuclear@1	1266 much faster. Usage example:
nuclear@1	1267
nuclear@1	1268 uLong adler = adler32(0L, Z_NULL, 0);
nuclear@1	1269
nuclear@1	1270 while (read_buffer(buffer, length) != EOF) {
nuclear@1	1271 adler = adler32(adler, buffer, length);
nuclear@1	1272 }
nuclear@1	1273 if (adler != original_adler) error();
nuclear@1	1274 */
nuclear@1	1275
nuclear@1	1276 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
nuclear@1	1277 z_off_t len2));
nuclear@1	1278 /*
nuclear@1	1279 Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
nuclear@1	1280 and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
nuclear@1	1281 each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
nuclear@1	1282 seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
nuclear@1	1283 */
nuclear@1	1284
nuclear@1	1285 ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
nuclear@1	1286 /*
nuclear@1	1287 Update a running CRC-32 with the bytes buf[0..len-1] and return the
nuclear@1	1288 updated CRC-32. If buf is NULL, this function returns the required initial
nuclear@1	1289 value for the for the crc. Pre- and post-conditioning (one's complement) is
nuclear@1	1290 performed within this function so it shouldn't be done by the application.
nuclear@1	1291 Usage example:
nuclear@1	1292
nuclear@1	1293 uLong crc = crc32(0L, Z_NULL, 0);
nuclear@1	1294
nuclear@1	1295 while (read_buffer(buffer, length) != EOF) {
nuclear@1	1296 crc = crc32(crc, buffer, length);
nuclear@1	1297 }
nuclear@1	1298 if (crc != original_crc) error();
nuclear@1	1299 */
nuclear@1	1300
nuclear@1	1301 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
nuclear@1	1302
nuclear@1	1303 /*
nuclear@1	1304 Combine two CRC-32 check values into one. For two sequences of bytes,
nuclear@1	1305 seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
nuclear@1	1306 calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
nuclear@1	1307 check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
nuclear@1	1308 len2.
nuclear@1	1309 */
nuclear@1	1310
nuclear@1	1311
nuclear@1	1312 /* various hacks, don't look :) */
nuclear@1	1313
nuclear@1	1314 /* deflateInit and inflateInit are macros to allow checking the zlib version
nuclear@1	1315 * and the compiler's view of z_stream:
nuclear@1	1316 */
nuclear@1	1317 ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
nuclear@1	1318 const char *version, int stream_size));
nuclear@1	1319 ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
nuclear@1	1320 const char *version, int stream_size));
nuclear@1	1321 ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
nuclear@1	1322 int windowBits, int memLevel,
nuclear@1	1323 int strategy, const char *version,
nuclear@1	1324 int stream_size));
nuclear@1	1325 ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
nuclear@1	1326 const char *version, int stream_size));
nuclear@1	1327 ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
nuclear@1	1328 unsigned char FAR *window,
nuclear@1	1329 const char *version,
nuclear@1	1330 int stream_size));
nuclear@1	1331 #define deflateInit(strm, level) \
nuclear@1	1332 deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
nuclear@1	1333 #define inflateInit(strm) \
nuclear@1	1334 inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
nuclear@1	1335 #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
nuclear@1	1336 deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
nuclear@1	1337 (strategy), ZLIB_VERSION, sizeof(z_stream))
nuclear@1	1338 #define inflateInit2(strm, windowBits) \
nuclear@1	1339 inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
nuclear@1	1340 #define inflateBackInit(strm, windowBits, window) \
nuclear@1	1341 inflateBackInit_((strm), (windowBits), (window), \
nuclear@1	1342 ZLIB_VERSION, sizeof(z_stream))
nuclear@1	1343
nuclear@1	1344
nuclear@1	1345 #if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
nuclear@1	1346 struct internal_state {int dummy;}; /* hack for buggy compilers */
nuclear@1	1347 #endif
nuclear@1	1348
nuclear@1	1349 ZEXTERN const char * ZEXPORT zError OF((int));
nuclear@1	1350 ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z));
nuclear@1	1351 ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
nuclear@1	1352
nuclear@1	1353 #ifdef __cplusplus
nuclear@1	1354 }
nuclear@1	1355 #endif
nuclear@1	1356
nuclear@1	1357 #endif /* ZLIB_H */